DCMFPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs Rev B FEATURES • Standard DIP-8 Package • I/O Isolation 3000VDC • 3.3VDC, 5VDC, and 12VDC Input Voltages Available • Single and Dual Outputs Available • High Efficiency • Over Load and Short Circuit Protection • UL/cUL 60950-1, IEC/EB 60950-1, UL/cUL 62368-1, and IEC/EN 62368 Pending Safety Approvals DESCRIPTION The DCMFPU01H series of DC DC converters offers 1 watt of output power in a compact 0.50” x 0.40” x 0.31” standard DIP-8 package. This series consists of both single and dual output models with 3.3VDC, 5VDC, and 12VDC input voltages available. Each model in this series has I/O isolation of 3000VDC, high efficiency, as well as over load and short circuit protection. This series also has UL/cUL 60950-1, IEC/EB 60950-1, UL/cUL 62368-1, and IEC/EN 62368 pending safety approvals. Please call factory for order details. Size: 0.50in x 0.40in x 0.31in (12.7mm x 10.2mm x 8.0mm) MODEL SELECTION TABLE Single Output Models Model Number DCMFPU01-033S033H DCMFPU01-033S05H DCMFPU01-033S12H DCMFPU01-033S15H DCMFPU01-05033H DCMFPU01-05S05H DCMFPU01-05S12H DCMFPU01-05S15H DCMFPU01-12S033H DCMFPU01-12S05H DCMFPU01-12S12H DCMFPU01-12S15H Input Voltage Range 3.3VDC (2.97~3.63) 5VDC (4.5~5.5) 12VDC (10.8~13.2) Output Voltage 3.3VDC 5VDC 12VDC 15VDC 3.3VDC 5VDC 12VDC 15VDC 3.3VDC 5VDC 12VDC 15VDC Output Current Min Load Max Load 6mA 300mA 4mA 200mA 1.68mA 84mA 1.34mA 67mA 6mA 300mA 4mA 200mA 1.68mA 84mA 1.34mA 67mA 6mA 300mA 4mA 200mA 1.68mA 84mA 1.34mA 67mA Input Current @No Load @Max. Load 400mA 384mA 45mA 382mA 376mA 257mA 250mA 30mA 246mA 242mA 107mA 105mA 17mA 104mA 102mA Output Load Regulation Power (Max.) 1W 1W 1W 15% 12% 12% 10% 12% 11% 9% 8% 8% 8% 8% 7% Efficiency (@Max.Load) 75% 79% 80% 81% 77% 80% 82% 83% 77% 79% 81% 82% MODEL SELECTION TABLE Dual Output Models Model Number DCMFPU01-033D05H DCMFPU01-033D12H DCMFPU01-033D15H DCMFPU01-05D05H DCMFPU01-05D12H DCMFPU01-05D15H DCMFPU01-12D05H DCMFPU01-12D12H DCMFPU01-12D15H 11/18/2016 Input Voltage Range 3.3VDC (2.97~3.63) 5VDC (4.5~5.5) 12VDC (10.8~13.2) Output Voltage ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC Output Current Min Load Max Load ±2mA ±100mA ±0.84mA ±42mA ±0.66mA ±33mA ±2mA ±100mA ±0.84mA ±42mA ±0.66mA ±33mA ±2mA ±100mA ±0.84mA ±42mA ±0.66mA ±33mA Input Current @No Load @Max. Load 389mA 45mA 382mA 370mA 250mA 30mA 243mA 239mA 104mA 17mA 102mA 101mA Output Load Regulation Power (Max.) 1W 1W 1W 12% 12% 10% 11% 9% 8% 7% 7% 7% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Efficiency (@Max.Load) 78% 80% 81% 80% 83% 83% 80% 82% 82% Page 1 of 5 DCMFPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs Rev B SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, Resistive Load, and Rated Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ 2.97 4.5 10.8 -0.7 -0.7 -0.7 3.3 5 12 Max Unit INPUT SPECIFICATIONS Input Voltage Range Input Surge Voltage (1 sec. max) Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Voltage Balance Output Power Output Current Maximum Capacitive Load 3.3V Input Models 5V Input Models 12V Input Models 3.3V Input Models 5V Input Models 12V Input Models All Models Single Output Models Dual Output Models 0-20 MHz bandwidth Dimensions (L x W x H) Case Material Pin Material SAFETY CHARACHTERISTICS Safety Approvals (Pending) EMI(4) EMS 11/18/2016 UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1 (CB report) UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1 (CB report) Conduction EN55032, EN55022, FCC part 15 EN55024 ESD EN61000-4-2 Air ±8kV, Contact ±6kV Radiated Immunity EN61000-4-3 10V/m Fast Transient(5) EN61000-4-4 ±2kV Surge(5) EN61000-4-5 ±1kV Conducted Immunity EN61000-4-6 10Vrms PFMF EN61000-4-8 3A/m VDC VDC See Table ±3.0 ±1.2 ±1.5 See Table ±0.1 ±1.0 See Table See Table 220 100 100 ±0.01 ±0.02 For Vin Change of 1% Io-10% to 100% Dual Output, Balanced Loads Ripple & Noise (20MHz bandwidth) Temperature Coefficient PROTECTION Short Circuit Protection Continuous, Automatic Recovery Over Load Protection Normal Vin at 25ºC ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Natural Convection Case Temperature Storage Temperature Range Humidity Non-Condensing Cooling Lead Temperature 1.5mm from case for 10 sec. MTBF (Calculated) MIL-HDBK-217F@25ºC, Ground Benign GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage 60 Seconds Isolation Resistance 500VDC Isolation Capacitance 100KHz, 1V PHYSICAL SPECIFICATIONS Weight 3.63 5.5 13.2 6 9 18 Internal Capacitor %Vnom. % % µF mVp-p %/ºC 160 -40 -50 % +90 +95 +125 95 Natural Convection 260 3,589,000 50 3000 10 See Table 80 110 20 ºC ºC ºC %RH ºC Hours KHz VDC GΩ pF 0.069oz(1.95g) 0.50in x 0.40in x 0.31in (12.7mm x 10.2mm x 8.0mm) Non-Conductive Black Plastic (Flammability to UL 94V-0 rated) Tinned Copper Class A Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] A A A A A A Page 2 of 5 Rev B DCMFPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs NOTES 1. 2. 3. 4. 5. 6. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. We recommend protecting the converter by a fast blow fuse in the input supply line. Other input and output voltages may be available, please contact factory. To meet EN55022 Class A an external filter is necessary, please contact factory. To meet EN61000-4-4 & EN61000-4-5 an external capacitor across the input pins is required. Suggested capacitor 680µF/50V KY Al-E Cap. Natural Convection is about 20LFM but is not equal to still air (0 LFM) *Due to advances in technology, specifications subject to change without notice. DERATING CURVES Power Derating Curve 11/18/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 DCMFPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs Rev B MECHANICAL DRAWINGS Single Output Pin 1 4 5 7 8 PIN CONNECTIONS Single Output -Vin +Vin +Vout -Vout No Pin Dual Output -Vin +Vin +Vout Common -Vout Dual Output All dimensions in mm (inches) Tolerance: x.x±0.5 (x.xx±0.02) x.xx±0.25 (x.xxx±0.01) Pins: ±0.05 (±0.002) 11/18/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev B DCMFPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/18/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5