Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTF9011/915.0/DCC6C is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6C case for mobile communications ISM900 systems. It provides low insertion loss and high attenuation. Centre Frequency : 915.00MHz 1. Package Dimensions (DCC6C) Pin Configuration 2 Input / Output 5 Output / Input 1,3,4,6 Case Ground Sign Data (unit: mm) Sign Data (unit: mm) A 0.6 E 1.1 B 1.5 F 3.0 C 1.5 G 3.0 D 1.8 2. Marking Laser Marking 3. Test Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 4. Typical Frequency Response 5. Performance 5-1. Maximum Ratings Rating Input Power Level DC Voltage Value Unit P 10 dBm VDC 12 V Operable Temperature Range TA -10 to +60 °C Storage Temperature Range Tstg -40 to +85 °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5-2. Electronic Characteristics Characteristic Minimum Typical Maximum Unit fC -- 915.000 -- MHz BW -- 26 -- MHz -- 3.5 5.0 dB -- 1.5 -- dB 25 30 30 20 27 35 40 25 ----- dB dB dB dB Nominal Centre Frequency Usable Pass Bandwidth IL Insertion Loss 902.00 …. 928.00 MHz Δα Inband Ripple 902.00 …. 928.00 MHz Absolute Attenuation DC …. 800.00 MHz 800.00 …. 880.00 MHz 950.00 …. 1080.0 MHz 1080.0 …. 2000.0 MHz α iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency fC is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com