3.0 x 1.0 mm Right Angle SMD Chip LED Lamp Part Number: APFA3010SURKCGKSYKC Hyper Red Green Super Bright Yellow ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 3.0 x 1.5 x 1.0 mm right angle SMD LED, 1.0 mm thickness z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. z Low power consumption z The Green source color devices are made with AlGaInP z Wide viewing angle z Ideal for backlight and indicator on GaAs substrate Light Emitting Diode. z The Super Bright Yellow device is made with AlGaInP z Package: 2000 pcs / reel (on GaAs substrate) light emitting diode chip. z Moisture sensitivity level: 3 z Tinned pads for improved solderability z Electrostatic discharge and power surge could damage the LEDs. z RoHS compliant z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions GREEN YELLOW RED Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI9517 REV NO: V.3A DATE: JUL/19/2017 PAGE: 1 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203004300 Selection Guide Part No. Emitting Color (Material) Lens Type Hyper Red (AlGaInP) APFA3010SURKCGKSYKC Water Clear Green (AlGaInP) Super Bright Yellow (AlGaInP) Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 120 220 *55 *80 20 45 *20 *45 120 180 *120 *180 2θ1/2 150° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Emitting Color Typ. λpeak Peak Wavelength Hyper Red Green Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 645 574 590 nm IF=20mA Hyper Red Green Super Bright Yellow 630 570 590 nm IF=20mA Spectral Line Half-width Hyper Red Green Super Bright Yellow 28 20 20 nm IF=20mA C Capacitance Hyper Red Green Super Bright Yellow 35 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Super Bright Yellow 1.95 2.1 2 2.5 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green Super Bright Yellow 10 10 10 uA VR=5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Super Bright Yellow Units Power dissipation 75 75 75 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 150 175 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAI9517 REV NO: V.3A DATE: JUL/19/2017 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203004300 Green Yellow Red Relative Intensity (a. u.) 100% Ta = 25 °C 80% 60% 40% 20% 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 APFA3010SURKCGKSYKC Hyper Red -15° Ta = 25 °C 0° -30° 15° 30° -45° 45° 60° -60° 75° -75° -90° 1.0 0.5 0.0 0.5 90° 1.0 SPEC NO: DSAI9517 REV NO: V.3A DATE: JUL/19/2017 PAGE: 3 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203004300 Green -15° Ta = 25 °C 0° -30° 15° 30° -45° 45° 60° -60° 75° -75° -90° 1.0 0.5 0.0 0.5 90° 1.0 SPEC NO: DSAI9517 REV NO: V.3A DATE: JUL/19/2017 PAGE: 4 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203004300 Super Bright Yellow -15° Ta = 25 °C 0° -30° 15° 30° -45° 45° 60° -60° 75° -75° -90° 1.0 0.5 0.0 0.5 90° 1.0 SPEC NO: DSAI9517 REV NO: V.3A DATE: JUL/19/2017 PAGE: 5 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203004300 APFA3010SURKCGKSYKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAI9517 REV NO: V.3A DATE: JUL/19/2017 PAGE: 6 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203004300 PACKING & LABEL SPECIFICATIONS APFA3010SURKCGKSYKC Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAI9517 REV NO: V.3A DATE: JUL/19/2017 PAGE: 7 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203004300