Ceramic Bandpass Filter 50Ω BFCN-4800+ 4400 to 5200 MHz Features • • • • Good VSWR, 1.2:1 typ @ passband Small size (0.126 x 0.063 x .037) Temperature stable LTCC construction CASE STYLE: FV1206 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • • • • • Harmonic rejection Telemetry Satellite Mobile Military and Commercial e and Reel Available Tapra cost at no ext Reel Size 7” Electrical Specifications1,2 at 25°C Specification Definition Parameter INSERTION LOSS (dB) Pass Band Stop Band, Lower Stop Band, Upper DC F3 F1 F2 F4 FREQUENCY (MHz) F5 Functional Schematic Devices/Reel 20, 50, 100, 200, 500,1000, 3000 F# Frequency (MHz) Center Frequency Insertion Loss VSWR Insertion Loss VSWR — F1 - F2 F1 - F2 DC - F3 DC - F3 Insertion Loss VSWR F4 - F5 F4 - F5 Min. Typ. 4400 - 5200 4400 - 5200 DC - 1800 DC - 1800 — — — — 4800 — — 25 30 Max. 2.0 1.7 — — 7500 - 12000 7500 - 12000 — — 25 15 — — Unit MHz dB :1 dB :1 dB :1 1. Measured on Mini-Circuits Characterization Test Board TB-270. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port. Maximum Ratings Operating Temperature Storage Temperature RF Power Input* -55°C to 100°C -55°C to +100°C 1.5W at 25°C *Passband rating, derate linearly to 0.25W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. BFCN-4800+ INSERTION LOSS (Full Band) BFCN-4800+ INSERTION LOSS (Pass Band) Top View 0.0 INSERTION LOSS (dB) INSERTION LOSS (dB) 0 20 40 60 80 100 0 2000 4000 6000 8000 10000 0.5 1.0 1.5 2.0 4400 12000 4600 FREQUENCY (MHz) BFCN-4800+ VSWR Bottom View 500 GROUP DELAY (nsec) VSWR 3 5200 0.32 0.28 100 0 4800 5000 FREQUENCY (MHz) 0.36 200 1 5200 0.40 300 Pad Connections 5000 BFCN-4800+ GROUP DELAY 400 Input Output Ground 4800 FREQUENCY (MHz) 0.24 0 2000 4000 6000 8000 FREQUENCY (MHz) 10000 12000 0.20 4400 4600 2,4 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. B M151107 ED-14537/1 BFCN-4800+ WZ/CP/AM 150601 Page 1 of 2 BFCN-4800+ Bandpass Filter Full Band Performance Pass Band Performance Frequency (MHz) Insertion Loss (dB) VSWR (:1) Frequency (MHz) 10.00 100.00 1000.00 1800.00 4400.00 5200.00 7500.00 10000.00 12000.00 86.56 75.22 50.52 30.99 0.79 0.81 31.68 27.39 22.49 349.26 412.74 206.71 92.77 1.32 1.23 35.89 87.13 58.68 4400.00 4500.00 4600.00 4700.00 4800.00 4900.00 5000.00 5100.00 5200.00 Insertion Loss (dB) 0.79 0.72 0.69 0.67 0.67 0.69 0.71 0.75 0.81 Group Delay (nsec) 0.30 0.29 0.29 0.29 0.28 0.28 0.29 0.30 0.30 Pad Connections Input Output Ground 1 (ON TOP) 3 2,4 (ON TOP) Product Marking: BB Demo Board MCL P/N: TB-270+ Suggested PCB Layout (PL-137) Outline Drawing PCB Land Pattern (ON TOP) (ON TOP) Suggested Layout, Tolerance to be within ±.002 PCB Land Pattern Outline Dimensions ( inch mm ) A .126 3.20 B .063 1.60 C .037 0.94 D .020 0.51 E .032 0.81 F .009 0.23 G .169 4.29 H .087 2.21 J .024 0.61 K .122 3.10 L .024 0.61 M .087 2.21 N .012 0.30 P wt .071 grams 1.80 .020 Suggested Layout, Additional Notes Tolerance to be within ±.002 A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2