CL620/CL640/CL670 SERIES LumiSTIK - LED 6” COLUMN TYPE: LumiStick QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE COLUMN VOLTAGE FINISH OPTION OPTION OPTION CL620/CL640/CL670 1 2 3 1- Heavy cast aluminum top cover with embedded heat sink. 2- Ø 6” (152) High impact white translucent acrylic diffuser UV stabilized. Available in three acrylic lengths: 27” (686), 51” (1295) and 72” (1829). 3- LED array. 4- Cast aluminum driver housing. 5- Ø 6” (152) Extruded aluminum column. 4 5 MATERIALS MOUNTING LumiSTIK column is made of 6061-T6 extruded aluminum alloy. All other cast parts are corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination. LumiSTIK column is available in three standard acrylic lengths. Other lengths are available on request. LumiSTIK column is designed for ease of access and installation. The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18”LG galvanized anchor bolts. Accessibility is done through a flush mount 2”X4” (100X178) hand hole cover plate. ELECTRICAL DRIVER LED Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -30ºC/-22ºF to 60ºC/140ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. CL620 - 27” (686) CL640 - 51” (1295) CL670 - 72” (1829) Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K. Removable modular LED platform. LIFE 50,000hrs L85B50 (based on IESNA TM-21 Test Method and LM-80 data). FINISH Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. Oct 2017 Rev 0 CERTIFICATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request. Rated IP65. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 1 CL620/CL640/CL670 SERIES LumiSTIK - LED TYPICAL PHOTOMETRY SUMMARY Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION MODEL SELECTION LED LIGHT SELECTION (4000K/80CRI) Select acrylic length SUFFIX CL620 L168W45 L168W65 INPUT WATTS DELIVERED LUMENS 45W 65W 3780 5395 72” 51” 27” CL640 CL620 CL640 CL670 CL670 L336W45 L336W65 L336W100 45W 65W 100W 3870 5525 8400 L504W65 65W L504W100 100W 5655 8500 OAH COLUMN SELECTION VOLTAGE1 OAH assembly POLE FOR: CL620 CL640 CL670 CLP669 CLP693 CLP6117 CLP6141 CLP6165 96” 120” 144” 168” 192” 123” 147” 171” 195” 219” 144” 168” 192” 216” 240” 120V 277V Optional 347V (OAH Column consists of acrylic + pole) FINISH STANDARD COLORS WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne SGT Steel Gray BGT English Cream OPTIONAL COLORS Wood grain finishes NMR Mahogany red2 NMO Maple oak2 NTW Teak wood2 Base column only CS Custom color RAL RAL# color (Refer to color chart) NOTE: LumiSTIK column is composed of five parts. Please specify: Model #, LED light source, OAH column, voltage and finish. Ex: CL640-L336W45-CLP6117-120-BKT OPTIONS ELECTRICAL LIGHT FS PH 347L SP Fuse3 Photocell3 347V input power driver Surge protector 10KV Alternate CCT ºK LED (LCF: Lumen conversion factor) Ground fault interruption receptacle4 Ground fault interruption with clear in-use cover4 Fixed 24” banner support (single arm at top)5 Two fixed 24” banner supports (arm at top & bottom)5 Two fixed 24” banner supports at 180º (arms at top only)5 Four fixed 24” banner supports at 180º (arms at top & bottom)5 NOTE: Other CCT & higher CRI available, please consult factory. ACCESSORIES GFI CGF BNF 2BNF BNF180 2BNF180 K27 K3 K35 2700K CCT 80 CRI (LCF: 0.91) 3000K CCT 80 CRI (LCF: 0.94) 3500K CCT 80 CRI (LCF: 0.98) LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Oct 2017 Rev 0 NOTES 1- Luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Cast aluminum top & base covers are as follows for selected wood grain finishes: BZT paired with NMR; SGT paired with NMO; BGT paired with NTW (Other colors available. Please contact factory). 3- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires (except for other types of mounting). 4- GFI and CGF options are installed 24” above grade unless otherwise specified. 5- BNF, 2BNF, BNF180 & 2BNF180 are factory set in position as required. Location along pole to be specified. LUMINIS.COM 2 CL620/CL640/CL670 SERIES LumiSTIK - LED MOUNTING INFORMATION 10.3” (262) Base cover line 12.5” (318) Dia. Orientation parallel to curb or walkway 18” (457) 4.87” (124) 9” (229) 10” (254) Bolt circle Hand hole position PLAN VIEW 2.8” (71) Anchor bolt projection above finished grade. The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18”LG galvanized anchor bolts. MOUNTING ACCESSORIES 2BNF: Two fixed 24” banner supports BNF180: Two fixed 24” banner supports at 180º 2BNF180: Four fixed 24” banner supports at 180º Oct 2017 Rev 0 BNF: Fixed 24” banner support LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS.COM 3