Ordering information DC-DC Converters Power Module type DHS50A DH 1 S 50 2 3 A 05 4 *Providing heat sink as option 5 -O 6 1Series name 2Single output 3Output wattage 4A : DC60-160V 5Output voltage 6Optional T : with Mounting hole (f3.4 thru) MODEL DHS50A05 DHS50A12 DHS50A15 MAX OUTPUT WATTAGE[W] 50.0 50.4 51.0 DHS50A24 50.4 DC OUTPUT 5V 10A 12V 4.2A 15V 3.4A 24V 2.1A MODEL DHS50A05 DHS50A12 DHS50A15 DHS50A24 VOLTAGE[V] DC60 - 160 SPECIFICATIONS INPUT DHS CURRENT[A] *1 0.55A 0.55A 0.55A 0.55A EFFICIENCY[%] *1 84.0typ 86.0typ 86.0typ 86.0typ VOLTAGE[V] 5 12 15 24 CURRENT[A] 10 4.2 3.4 2.1 LINE REGULATION[mV] 10max 24max 30max 48max LOAD REGULATION[mV] 10max 24max 30max 48max 0 to +100C*2 80max 120max 120max 120max -40 to 0C *2 120max 150max 150max 150max 0 to 15% Load*2 160max 240max 240max 240max 0 to +100C*2 120max 150max 150max 150max -40 to 0C *2 200max 200max 200max 250max 0 to 15% Load*2 240max 300max 300max 300max 0 to +65C 50max 120max 150max 240max -40 to +100C 100max 240max 300max 480max 40max 60max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 20max 200max (DCIN 110V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] Fixed (TRM pin open), adjustable by external VR or external voltage 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 17.25 - 21.75 27.60 - 34.80 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION[V] 6.30 - 7.60 13.90 - 17.55 CIRCUIT AND REMOTE SENSING nothing OTHERS REMOTE ON/OFF Provided (Neqative Logic L : ON, H :OFF) ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis Complies with IEC61373 Category 1 Class B IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis Complies with IEC61373 Category 1 Class B AGENCY APPROVALS UL60950-1, C-UL (CSA60950-1), EN60950-1 CASE SIZE/WEIGHT 58.4X12.7X37.3mm [2.3X0.5X1.47 inches] (WXHXD) / 60g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC110V) and rated load. Ripple and ripple noise is measured by using measuring board. Refer to the manual Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the manual for input range. DHS-2 DHS50A External view Recomending size for processing PCB (TOP VIEW) Base Plate(Aluminum) Lot No. 2-f3.5 [0.14] 12.7 ±0.5 [0.5] 4-f1.5 [0.06] [1.47] 7.62 7.62 5.08 7.62 [0.3] [0.3] [0.2] [0.3] [0.3] [1.1] 37.3 max RC +VOUT 27.9 ±0.5 TRM -VIN [0.19] -VOUT [0.3] 2-f2 ±0.2 [0.08] (4.7) 7.62 5.08 1.27 [0.3] [0.2] [0.05] 4-f1±0.1 [0.04] 58.4 max [2.3] 48.3 ±0.5 [1.9] 7.62 7.62 (5.0) [0.2] 5.0 ±0.5 [0.2] Case(PBT) 2-f2.5 [0.1] 48.3 [1.9] +VIN Name Plate 2-M3 Mounting Hole ¶ Dimensions in mm, [ ]=inches ¶ Div. : 0.2inch ¶ Tolerance : ±0.3 [±0.012] ¶ Weight : 60g max ¶ Dimensions in mm, [ ]=inches ¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max DHS-3 DHS Ordering information DC-DC Converters Power Module type DHS100A DH 1 S 100 2 3 A 05 4 *Providing heat sink as option 5 -O 6 1Series name 2Single output 3Output wattage 4A : DC60-160V 5Output voltage 6Optional T : with Mounting hole (f3.4 thru) MODEL DHS100A05 DHS100A12 DHS100A15 MAX OUTPUT WATTAGE[W] 100.0 100.8 100.5 DHS100A24 100.8 DC OUTPUT 5V 20A 12V 8.4A 15V 6.7A 24V 4.2A MODEL DHS100A05 DHS100A12 DHS100A15 DHS100A24 VOLTAGE[V] DC60 - 160 SPECIFICATIONS INPUT DHS CURRENT[A] *1 1.1A 1.1A 1.1A 1.1A EFFICIENCY[%] *1 85.0typ 88.0typ 88.0typ 88.0typ VOLTAGE[V] 5 12 15 24 CURRENT[A] 20 8.4 6.7 4.2 LINE REGULATION[mV] 10max 24max 30max 48max LOAD REGULATION[mV] 10max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] 24max 30max 48max 0 to +100C*2 80max 120max 120max 120max -40 to 0C *2 120max 150max 150max 150max 0 to 15% Load*2 160max 240max 240max 240max 0 to +100C*2 120max 150max 150max 150max -40 to 0C *2 200max 200max 200max 250max 0 to 15% Load*2 240max 300max 300max 300max 0 to +65C 50max 120max 150max 240max -40 to +100C 100max 240max 300max 480max 40max 60max 90max DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 20max 200max (DCIN 110V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] Fixed (TRM pin open), adjustable by external VR or external voltage 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 17.25 - 21.75 27.60 - 34.80 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION[V] 6.30 - 7.60 13.90 - 17.55 CIRCUIT AND REMOTE SENSING nothing OTHERS REMOTE ON/OFF Provided (Neqative Logic L : ON, H :OFF) ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis Complies with IEC61373 Category 1 Class B IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis Complies with IEC61373 Category 1 Class B AGENCY APPROVALS UL60950-1, C-UL (CSA60950-1), EN60950-1 CASE SIZE/WEIGHT 58.4X12.7X37.3mm [2.3X0.5X1.47 inches] (WXHXD) / 60g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC110V) and rated load. Ripple and ripple noise is measured by using measuring board. Refer to the manual. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the manual for input range. DHS-4 DHS100A External view Recomending size for processing PCB (TOP VIEW) Base Plate(Aluminum) Lot No. 2-f3.5 [0.14] 12.7 ±0.5 [0.5] 4-f1.5 [0.06] [1.47] 7.62 7.62 5.08 7.62 [0.3] [0.3] [0.2] [0.3] [0.3] [1.1] 37.3 max RC +VOUT 27.9 ±0.5 TRM -VIN [0.19] -VOUT [0.3] 2-f2 ±0.2 [0.08] (4.7) 7.62 5.08 1.27 [0.3] [0.2] [0.05] 4-f1±0.1 [0.04] 58.4 max [2.3] 48.3 ±0.5 [1.9] 7.62 7.62 (5.0) [0.2] 5.0 ±0.5 [0.2] Case(PBT) 2-f2.5 [0.1] 48.3 [1.9] +VIN Name Plate 2-M3 Mounting Hole ¶ Dimensions in mm, [ ]=inches ¶ Div. : 0.2inch ¶ Tolerance : ±0.3 [±0.012] ¶ Weight : 60g max ¶ Dimensions in mm, [ ]=inches ¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max DHS-5 DHS Ordering information DC-DC Converters Power Module type DHS200A DH 1 S 200 2 3 A 05 4 *Providing heat sink as option 5 -O 6 1Series name 2Single output 3Output wattage 4A : DC60-160V 5Output voltage 6Optional T : with Mounting hole (f3.4 thru) MODEL DHS200A05 DHS200A12 DHS200A15 MAX OUTPUT WATTAGE[W] 200.0 200.4 201.0 DHS200A24 201.6 DC OUTPUT 5V 40A 12V 16.7A 15V 13.4A 24V 8.4A MODEL DHS200A05 DHS200A12 DHS200A15 DHS200A24 VOLTAGE[V] DC60 - 160 SPECIFICATIONS INPUT DHS CURRENT[A] *1 2.1A 2.1A 2.1A 2.1A EFFICIENCY[%] *1 87.0typ 88.0typ 88.0typ 88.0typ VOLTAGE[V] 5 12 15 24 CURRENT[A] 40 16.7 13.4 8.4 LINE REGULATION[mV] 10max 24max 30max 48max LOAD REGULATION[mV] 10max 24max 30max 48max 0 to +100C*2 80max 120max 120max 120max -40 to 0C *2 120max 150max 150max 150max 0 to 15% Load*2 160max 240max 240max 240max 0 to +100C*2 120max 150max 150max 150max -40 to 0C *2 200max 200max 200max 250max 0 to 15% Load*2 240max 300max 300max 300max 0 to +65C 50max 120max 150max 240max -40 to +100C 100max 240max 300max 480max 40max 60max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 200max (DCIN 110V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND REMOTE SENSING OTHERS REMOTE ON/OFF ISOLATION 20max Fixed (TRM pin open), adjustable by external VR or external voltage 3.00 - 6.00 7.20 - 13.20 9.00 - 16.50 14.40 - 26.40 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 17.25 - 20.25 27.60 - 32.40 Works over 105% of rating and recovers automatically 6.30 - 7.30 13.90 - 16.35 Provided Provided (Neqative Logic L : ON, H :OFF) INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis Complies with IEC61373 Category 1 Class B IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis Complies with IEC61373 Category 1 Class B AGENCY APPROVALS UL60950-1, C-UL (CSA60950-1), EN60950-1 CASE SIZE/WEIGHT 58.4X12.7X61mm [2.3X0.5X2.4 inches] (WXHXD) / 100g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC110V) and rated load. Ripple and ripple noise is measured by using measuring board. Refer to the manual. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the manual for input range. DHS-6 DHS200A External view Recomending size for processing PCB (TOP VIEW) 12.7 ±0.5 [0.5] Lot No. 6-f1.5 [0.06] 2-f2.5 [0.1] 58.4 max [2.3] 48.3 ±0.5 [1.9] 2-f2 ±0.2 [0.08] 7.62 5.08 5.08 7.62 7.62 5.08 5.08 [0.3] [0.2] [0.2] [0.3] [0.3] [0.2] [0.2] (5.0) [0.2] 5.0 ±0.5 [0.2] Case(PBT) 6-f1 ±0.1 [0.04] 12.7 [0.5] -S 12.7 [0.5] RC TRM +S +VIN 50.8 ±0.5 [2] 61 max [2.4] 10.16 7.62 7.62 10.16 [0.4] [0.3] [0.3] [0.4] -VOUT -VIN Name Plate (5.1) [0.2] +VOUT 4-M3 Mounting Hole 50.8 [2.0] Base Plate(Aluminum) 4-f3.5 [0.14] 48.3 [1.9] ¶ Dimensions in mm, [ ]=inches ¶ Div. : 0.2inch ¶ Tolerance : ±0.3 [±0.012] ¶ Weight : 100g max ¶ Dimensions in mm, [ ]=inches ¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max DHS-7 DHS Ordering information DC-DC Converters Power Module type DHS50B DH 1 S 50 2 3 B 05 4 *Providing heat sink as option 5 -O 6 1Series name 2Single output 3Output wattage 4B : DC200-400V 5Output voltage 6Optional T : with Mounting hole (f3.4 thru) MODEL DHS50B03 DHS50B05 DHS50B12 DHS50B15 DHS50B24 MAX OUTPUT WATTAGE[W] 33.0 50.0 50.4 51.0 50.4 DHS50B28 50.4 DC OUTPUT 3.3V 10A 5V 10A 12V 4.2A 15V 3.4A 24V 2.1A 28V 1.8A MODEL DHS50B03 DHS50B05 DHS50B12 DHS50B15 DHS50B24 DHS50B28 VOLTAGE[V] DC200 - 400 0.22A SPECIFICATIONS INPUT DHS CURRENT[A] *1 0.15A 0.22A 0.22A 0.22A 0.22A EFFICIENCY[%] *1 77.0typ 80.0typ 83.0typ 83.0typ 83.0typ 82.0typ VOLTAGE[V] 3.3 5 12 15 24 28 CURRENT[A] 10 10 4.2 3.4 2.1 1.8 LINE REGULATION[mV] 10max 10max 24max 30max 48max 56max LOAD REGULATION[mV] 10max 10max 24max 30max 48max 56max 0 to +100C*2 80max 80max 120max 120max 120max 120max -40 to 0C *2 120max 120max 150max 150max 150max 150max 0 to 15% Load*2 160max 160max 240max 240max 240max 240max 0 to +100C*2 120max 120max 150max 150max 150max 150max -40 to 0C *2 200max 200max 200max 200max 250max 250max 0 to 15% Load*2 240max 240max 300max 300max 300max 300max 0 to +65C 35max 50max 120max 150max 240max 280max 100max 240max 300max 480max 560max 20max 40max 60max 90max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] -40 to +100C 66max DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 200max (DCIN 280V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND REMOTE SENSING OTHERS REMOTE ON/OFF ISOLATION 16max Fixed (TRM pin open), adjustable by external VR or external voltage 2.97 - 3.96 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 25.20 - 30.80 3.30 - 3.40 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 27.56 - 28.44 17.25 - 21.75 27.60 - 34.80 32.20 - 40.60 Works over 105% of rating and recovers automatically 4.20 - 5.70 6.30 - 7.60 13.90 - 17.55 None Provided (Neqative Logic L : ON, H :OFF) INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 58.4X12.7X37.3mm [2.3X0.5X1.47 inches] (WXHXD) / 60g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board. Refer to the manual Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the manual for input range. DHS-8 DHS50B External view Recomending size for processing PCB (TOP VIEW) Base Plate(Aluminum) Lot No. 2-f3.5 [0.14] 12.7 ±0.5 [0.5] 4-f1.5 [0.06] [1.47] 7.62 7.62 5.08 7.62 [0.3] [0.3] [0.2] [0.3] [0.3] [1.1] 37.3 max RC +VOUT 27.9 ±0.5 TRM -VIN [0.19] -VOUT [0.3] 2-f2 ±0.2 [0.08] (4.7) 7.62 5.08 1.27 [0.3] [0.2] [0.05] 4-f1±0.1 [0.04] 58.4 max [2.3] 48.3 ±0.5 [1.9] 7.62 7.62 (5.0) [0.2] 5.0 ±0.5 [0.2] Case(PBT) 2-f2.5 [0.1] 48.3 [1.9] +VIN Name Plate 2-M3 Mounting Hole ¶ Dimensions in mm, [ ]=inches ¶ Div. : 0.2inch ¶ Tolerance : ±0.3 [±0.012] ¶ Weight : 60g max ¶ Dimensions in mm, [ ]=inches ¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max DHS-9 DHS Ordering information DC-DC Converters Power Module type DHS100B DH 1 S 100 2 3 B 05 4 *Providing heat sink as option 5 -O 6 1Series name 2Single output 3Output wattage 4B : DC200-400V 5Output voltage 6Optional T : with Mounting hole (f3.4 thru) MODEL DHS100B03 DHS100B05 DHS100B12 DHS100B15 DHS100B24 MAX OUTPUT WATTAGE[W] 66.0 100.0 100.8 100.5 100.8 DHS100B28 100.8 DC OUTPUT 3.3V 20A 5V 20A 12V 8.4A 15V 6.7A 24V 4.2A 28V 3.6A MODEL DHS100B03 DHS100B05 DHS100B12 DHS100B15 DHS100B24 DHS100B28 VOLTAGE[V] DC200 - 400 0.42A SPECIFICATIONS INPUT DHS CURRENT[A] *1 0.30A 0.44A 0.42A 0.42A 0.42A EFFICIENCY[%] *1 79.0typ 82.0typ 85.0typ 86.0typ 86.0typ 86.0typ VOLTAGE[V] 3.3 5 12 15 24 28 CURRENT[A] 20 20 8.4 6.7 4.2 3.6 LINE REGULATION[mV] 10max 10max 24max 30max 48max 56max LOAD REGULATION[mV] 10max 10max 24max 30max 48max 56max 0 to +100C*2 80max 80max 120max 120max 120max 120max -40 to 0C *2 120max 120max 150max 150max 150max 150max 0 to 15% Load*2 160max 160max 240max 240max 240max 240max 0 to +100C*2 120max 120max 150max 150max 150max 150max -40 to 0C *2 200max 200max 200max 200max 250max 250max 0 to 15% Load*2 240max 240max 300max 300max 300max 300max 0 to +65C 35max 50max 120max 150max 240max 280max 100max 240max 300max 480max 560max 20max 40max 60max 90max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] -40 to +100C 66max DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 200max (DCIN 280V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND REMOTE SENSING OTHERS REMOTE ON/OFF ISOLATION 16max Fixed (TRM pin open), adjustable by external VR or external voltage 2.97 - 3.96 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 25.20 - 30.80 3.30 - 3.40 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 27.56 - 28.44 17.25 - 21.75 27.60 - 34.80 32.20 - 40.60 Works over 105% of rating and recovers automatically 4.20 - 5.70 6.30 - 7.60 13.90 - 17.55 None Provided (Neqative Logic L : ON, H :OFF) INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 58.4X12.7X37.3mm [2.3X0.5X1.47 inches] (WXHXD) / 60g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board. Refer to the manual. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the manual for input range. DHS-10 DHS100B External view Recomending size for processing PCB (TOP VIEW) Base Plate(Aluminum) Lot No. 2-f3.5 [0.14] 12.7 ±0.5 [0.5] 4-f1.5 [0.06] [1.47] 7.62 7.62 5.08 7.62 [0.3] [0.3] [0.2] [0.3] [0.3] [1.1] 37.3 max RC +VOUT 27.9 ±0.5 TRM -VIN [0.19] -VOUT [0.3] 2-f2 ±0.2 [0.08] (4.7) 7.62 5.08 1.27 [0.3] [0.2] [0.05] 4-f1±0.1 [0.04] 58.4 max [2.3] 48.3 ±0.5 [1.9] 7.62 7.62 (5.0) [0.2] 5.0 ±0.5 [0.2] Case(PBT) 2-f2.5 [0.1] 48.3 [1.9] +VIN Name Plate 2-M3 Mounting Hole ¶ Dimensions in mm, [ ]=inches ¶ Div. : 0.2inch ¶ Tolerance : ±0.3 [±0.012] ¶ Weight : 60g max ¶ Dimensions in mm, [ ]=inches ¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max DHS-11 DHS Ordering information DC-DC Converters Power Module type DHS250B DH 1 S 250 2 3 B *Providing heat sink as option MODEL 05 4 5 -O 6 1Series name 2Single output 3Output wattage 4B : DC200-400V 5Output voltage 6Optional T : with Mounting hole (f3.4 thru) DHS250B03 DHS250B05 DHS250B07 DHS250B12 DHS250B15 DHS250B24 DHS250B28 DHS250B48 MAX OUTPUT WATTAGE[W] 165.0 250.0 247.5 252.0 247.5 252.0 252.0 249.6 DC OUTPUT 3.3V 50A 5V 50A 7.5V 33A 12V 21A 15V 16.5A 24V 10.5A 28V 9.0A 48V 5.2A SPECIFICATIONS MODEL DHS250B03 DHS250B05 DHS250B07 DHS250B12 DHS250B15 DHS250B24 DHS250B28 DHS250B48 VOLTAGE[V] INPUT DHS *1 0.67A 1.0A 1.0A 1.0A 1.0A 1.0A 1.0A 1.0A EFFICIENCY[%] *1 88.0typ 90.0typ 88.0typ 88.0typ 88.0typ 88.0typ 88.0typ 89.0typ VOLTAGE[V] 3.3 5 7.5 12 15 24 28 48 CURRENT[A] 50 50 33 21 16.5 10.5 9.0 5.2 LINE REGULATION[mV] 10max 10max 20max 24max 30max 48max 56max 96max LOAD REGULATION[mV] 10max 10max 20max 24max 30max 48max 56max 96max 0 to +100C*2 80max 80max 100max 120max 120max 120max 120max 200max -40 to 0C *2 120max 120max 130max 150max 150max 150max 150max 250max 0 to 15% Load*2 160max 160max 200max 240max 240max 240max 240max 400max 0 to +100C*2 120max 120max 130max 150max 150max 150max 150max 250max -40 to 0C *2 200max 200max 200max 200max 200max 250max 250max 400max 0 to 15% Load*2 240max 240max 260max 300max 300max 300max 300max 500max 0 to +65C 35max 50max 70max 120max 150max 240max 280max 480max 100max 140max 240max 300max 480max 560max 960max 20max 30max 40max 60max 90max 90max 180max RIPPLE[mVp-p] OUTPUT DC200 - 400 CURRENT[A] RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] -40 to +100C 66max DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 16max 200max (DCIN 280V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] Fixed (TRM pin open), adjustable by external VR or external voltage 1.98 - 3.96 3.00 - 6.00 4.50 - 8.25 7.20 - 13.20 9.00 - 16.50 14.40 - 26.40 16.80 - 30.80 28.80 - 52.80 3.30 - 3.40 4.97 - 5.13 7.43 - 7.67 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 27.56 - 28.44 47.24 - 48.76 17.25 - 20.25 27.60 - 32.40 32.20 - 37.80 55.20 - 64.80 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION[V] 4.20 - 4.85 6.30 - 7.30 8.70 - 10.20 13.90 - 16.35 CIRCUIT AND REMOTE SENSING Provided OTHERS REMOTE ON/OFF Provided (Neqative Logic L : ON, H :OFF) ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 58.4X12.7X61mm [2.3X0.5X2.4 inches](WXHXD) / 100g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board. Refer to the manual. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the manual for input range. DHS-12 DHS250B External view Recomending size for processing PCB (TOP VIEW) 12.7 ±0.5 [0.5] Lot No. 6-f1.5 [0.06] 2-f2.5 [0.1] 58.4 max [2.3] 48.3 ±0.5 [1.9] 2-f2 ±0.2 [0.08] 7.62 5.08 5.08 7.62 7.62 5.08 5.08 [0.3] [0.2] [0.2] [0.3] [0.3] [0.2] [0.2] (5.0) [0.2] 5.0 ±0.5 [0.2] Case(PBT) 6-f1 ±0.1 [0.04] 12.7 [0.5] -S 12.7 [0.5] RC TRM +S +VIN 50.8 ±0.5 [2] 61 max [2.4] 10.16 7.62 7.62 10.16 [0.4] [0.3] [0.3] [0.4] -VOUT -VIN Name Plate (5.1) [0.2] +VOUT 4-M3 Mounting Hole 50.8 [2.0] Base Plate(Aluminum) 4-f3.5 [0.14] 48.3 [1.9] ¶ Dimensions in mm, [ ]=inches ¶ Div. : 0.2inch ¶ Tolerance : ±0.3 [±0.012] ¶ Weight : 100g max ¶ Dimensions in mm, [ ]=inches ¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max DHS-13 DHS