FH105A Ordering number : ENA1126A SANYO Semiconductors DATA SHEET FH105A NPN Epitaxial Planar Silicon Composite Transistor High-Frequency Low-Noise Amplifier, Differential Amplifier Applications Features • • • Composite type with 2 transistors contained in the MCP package currently in use, improving the mounting efficiency greatly The FH105A is formed with two chips, being equivalent to the 2SC5245A, placed in one package Optimal for differential amplification due to excellent thermal equilibrium and pair capability Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Conditions Ratings Unit VCBO VCEO 20 V 10 V VEBO IC 1.5 V 30 mA When mounted on ceramic substrate (250mm2×0.8mm) 1unit 150 mW When mounted on ceramic substrate (250mm2×0.8mm) 300 mW 150 °C --55 to +150 °C Total Power Dissipation PC PT Junction Temperature Tj Storage Temperature Tstg Product & Package Information unit : mm (typ) 7026A-005 • Package : MCP6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 2.1 5 0.2 6 FH105A-TR-E 0.15 2.0 4 Packing Type : TR 0 to 0.08 1.25 0.425 Package Dimensions LOT No. 0.9 0.2 0.425 1 1 2 0.65 3 0.3 Marking 1 : Collector1 2 : Base2 3 : Collector2 4 : Emitter2 5 : Emitter1 6 : Base1 TR 105 1 LOT No. Electrical Connection B1 E1 E2 Tr1 SANYO : MCP6 Tr2 C1 B2 C2 http://www.sanyosemi.com/en/network/ 82912 TKIM/O2908AB MSIM TC-00001689 No. A1126-1/8 FH105A Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Ratings Conditions min typ ICBO IEBO VCB=10V, IE=0A VEB=1V, IC=0A DC Current Gain Ratio hFE hFE(small/large) VCE=5V, IC=10mA VCE=5V, IC=10mA Base-to-Emitter Voltage Diffrence VBE(large-small) VCE=5V, IC=10mA Gain-Bandwidth Product VCE=5V, IC=10mA 5 Output Capacitance fT Cob Forward Transfer Gain ⏐S21e⏐ VCB=10V, f=1MHz VCE=5V, IC=10mA, f=1.5GHz 8 Noise Figure NF Emitter Cutoff Current DC Current Gain 2 Unit max 90 1.0 μA 10 μA 200 0.7 0.95 1.0 mV 8 GHz 0.45 0.7 pF 10 VCE=5V, IC=5mA, f=1.5GHz dB 1.4 3.0 dB Note) The specifications shown above are for each individual transistor except the hFE(small/large) and VBE (large-small) for which pair capability is also shown. Ordering Information Device Package Shipping memo MCP6 3,000pcs./reel Pb Free FH105A-TR-E hFE -- IC 5 Gain-Bandwidth Product, f T -- GHz 3 DC Current Gain, hFE 2 100 7 5 3 2 10 f T -- IC 2 VCE=5V 10 =5V VCE =1V VCE 7 5 3 2 7 5 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector Current, IC -- mA 2 3 5 7 100 IT00322 1.0 1.0 2 3 5 7 10 Collector Current, IC -- mA 2 3 5 IT14098 No. A1126-2/8 FH105A Cob -- VCB 5 Cre -- VCB 5 f=1MHz Reverse Transfer Capacitance, Cre -- pF f=1MHz Output Capacitance, Cob -- pF 3 2 1.0 7 5 3 2 0.1 7 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 2 1.0 7 5 3 2 0.1 7 5 7 0.1 5 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V IT00324 NF -- IC 12 3 VCE=2V f=1GHz 10 Noise Figure, NF -- dB 10 8 6 2 0 0.1 2 3 5 7 2 1.0 3 5 7 10 8 6 4 2 2 Collector Current, IC -- mA 3 0 0.1 5 2 3 5 7 1.0 2 3 5 7 10 2 f=1GHz 2 0 5V 4 10 V 6 5V 2V =1V V CE 8 12 2V 10 14 =1 V CE 2 Forward Transfer Gain, ⏐S21e⏐ -- dB f=1.5GHz 12 5 IT00327 ⏐S21e⏐2 -- IC 16 14 3 Collector Current, IC -- mA IT00326 ⏐S21e⏐2 -- IC 16 5V V 4 V CE=1 Noise Figure, NF -- dB 5 NF -- IC 12 f=1.5GHz 2 Forward Transfer Gain, ⏐S21e⏐ -- dB 3 IT00325 8 6 4 2 0 3 5 7 2 1.0 3 5 7 10 2 Collector Current, IC -- mA 3 5 7 100 IT00328 PC -- Ta 350 3 5 7 1.0 2 3 5 7 10 2 Collector Current, IC -- mA 3 5 7 100 IT00329 Collector Dissipation, PC -- mW When mounted on ceramic substrate (250mm2✕0.8mm) 300 250 To t al 200 di 150 ss ip ati on 1u nit 100 50 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT00330 No. A1126-3/8 FH105A S Parameter S11e f=200MHz to 2000MHz(200MHz Step) S21e f=200MHz to 2000MHz(200MHz Step) 90° j50 j25 j100 j150 j200 j250 j10 0 --j10 60° 120° 25 2.0GHz 250 150 50 100 2.0GHz VCE=5V 2.0GHz IC=10mAV =5V CE IC=5mA 0.2GHz 0.2GHz 2.0GHz --j250 0.2GHz 0.2GHz --j200 --j150 VCE=1V VCE=2V IC=1mA --j100 --j25 IC=3mA 10 VCE=5V IC=10mA 150° 0.2GHz VCE=5V IC=5mA 2.0GHz 0.2GHz 2.0GHz VCE=2V 2.0GHz 0.2GHz I =3mA V =1V 4 8 CE ±180° C 2.0GHz IC=1mA 0.2GHz --90° j50 60° 2.0GHz 2.0GHz VCE=5V 2.0GHz IC=5mA VCE=5V 2.0GHz IC=10mA 30° VCE=2V VCE=1V 0.2GHz IC=3mA IC=1mA 0.2GHz 0.2GHz 0.2GHz 0.04 0.08 0.12 0.16 0.2 0 j25 j200 j250 j10 0 10 --30° --150° --j25 --60° IT00333 j100 j150 --j10 --90° IT00332 S22e f=200MHz to 2000MHz(200MHz Step) 90° --120° 0 --60° --120° S12e f=200MHz to 2000MHz(200MHz Step) ±180° 16 20 --30° IT00331 150° 12 --150° --j50 120° 30° 25 50 150 100 V =5V CE 250 IC=10mA 0.2GHz 0.2GHz 0.2GHz 2.0GHz 0.2GHz 2.0GHz 2.0GHz --j250 --j200 2.0GHz VCE=1V --j150 VCE=5V IC=1mA IC=5mA VCE=2V --j100 IC=3mA --j50 IT00334 No. A1126-4/8 FH105A S Parameters (Common emitter) VCE=5V, IC=5mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.763 0.590 0.456 0.374 0.323 0.288 0.264 0.248 0.239 0.235 ∠S11 -37.5 -65.4 -85.5 -102.0 -115.0 -127.5 -137.7 -147.4 -156.9 -165.7 ⏐S21⏐ 11.926 9.202 7.173 5.743 4.785 4.105 3.599 3.213 2.905 2.651 ∠S21 146.9 124.3 109.4 98.7 90.5 83.6 77.5 71.3 66.4 61.3 ⏐S12⏐ 0.036 0.058 0.073 0.086 0.098 0.110 0.123 0.136 0.150 0.165 ∠S12 70.7 60.9 57.4 56.7 56.7 57.2 57.7 57.6 57.6 57.2 ⏐S22⏐ 0.892 0.740 0.631 0.566 0.528 0.505 0.488 0.476 0.466 0.462 ∠S22 -19.1 -29.1 -33.7 -35.8 -37.2 -38.4 -39.6 -41.2 -43.3 -45.4 ∠S11 -52.6 -84.6 -106.3 -124.6 -136.5 -148.9 -158.3 -167.3 -175.6 -177.5 ⏐S21⏐ 16.354 11.011 8.026 6.250 5.115 4.336 3.813 3.365 3.030 2.754 ∠S21 136.2 113.3 100.5 91.3 84.7 78.8 73.4 68.1 63.5 58.9 ⏐S12⏐ 0.031 0.048 0.062 0.076 0.090 0.104 0.119 0.135 0.150 0.166 ∠S12 67.5 62.4 62.2 63.4 64.3 64.4 64.5 63.8 63.1 62.5 ⏐S22⏐ 0.804 0.622 0.533 0.491 0.469 0.458 0.449 0.443 0.436 0.438 ∠S22 -23.9 -30.5 -32.0 -32.4 -33.2 -34.6 -35.8 -37.7 -39.6 -41.9 ∠S11 -30.7 -56.3 -76.1 -93.1 -106.3 -119.6 -130.2 -140.5 -150.0 -160.0 ⏐S21⏐ 8.491 7.161 5.879 4.882 4.154 3.597 3.212 2.875 2.604 2.383 ∠S21 153.0 131.9 116.3 104.2 95.0 87.1 80.2 73.4 67.7 62.1 ⏐S12⏐ 0.044 0.075 0.095 0.109 0.121 0.132 0.143 0.154 0.166 0.179 ∠S12 72.5 60.9 54.1 51.0 49.3 48.7 48.6 48.7 48.6 48.9 ⏐S22⏐ 0.931 0.808 0.696 0.615 0.564 0.526 0.496 0.475 0.461 0.451 ∠S22 -17.1 -28.8 -36.2 -40.6 -43.5 -45.8 -47.5 -49.6 -51.6 -52.9 ∠S11 -18.9 -37.3 -53.6 -69.4 -82.5 -95.8 -106.1 -117.2 -127.5 -137.9 ⏐S21⏐ 3.296 3.206 2.942 2.711 2.449 2.252 2.061 1.909 1.766 1.658 ∠S21 162.5 145.9 131.2 117.8 107.0 96.9 88.1 79.5 72.2 65.2 ⏐S12⏐ 0.054 0.102 0.139 0.166 0.187 0.199 0.207 0.212 0.215 0.217 ∠S12 77.2 65.9 56.3 48.6 42.5 37.3 33.5 30.6 28.6 27.6 ⏐S22⏐ 0.980 0.934 0.870 0.811 0.763 0.715 0.673 0.638 0.611 0.592 ∠S22 -11.0 -20.5 -29.0 -35.5 -40.9 -45.7 -49.4 -53.4 -56.5 -59.9 VCE=5V, IC=10mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.605 0.417 0.319 0.266 0.238 0.225 0.215 0.213 0.212 0.216 VCE=2V, IC=3mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.842 0.704 0.579 0.480 0.417 0.376 0.343 0.319 0.303 0.298 VCE=1V, IC=1mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.945 0.884 0.810 0.728 0.667 0.605 0.561 0.518 0.492 0.465 No. A1126-5/8 FH105A Embossed Taping Specification FH105A-TR-E No. A1126-6/8 FH105A Outline Drawing FH105A-TR-E Land Pattern Example Mass (g) Unit 0.007 mm * For reference Unit: mm 1.9 0.8 0.4 0.65 0.65 No. A1126-7/8 FH105A Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No. A1126-8/8