PRODUCT DATASHEET Angelina series last update 13/3/2015 DETAILS Product Number FC13976_ANGELINA-RZ-W Family Angelina Type RefPack Color metal Diameter 82 mm Height 31 mm Style round Optic Material PC Holder Material Fastening screw, socket Status production ready ROHS Compliant Yes Date Updated 13/03/2015 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector LUXEON K12 54 deg Wide 89 % 1.000 TE: 2213134-2 + OPTIC CLIP Z50 TYPE1 2213194-1 LUXEON K16 54 deg Wide 89 % 0.900 TE: 2213134-2 + OPTIC CLIP Z50 TYPE1 2213194-1 COB J-Type 48 deg Wide 87 % 0.930 IDEAL: 50-2103NC + 50-2100AN PrevaLED Core Z4 LES19 55 deg Wide 88 % 0.870 TE: OPTIC CLIP Z50 TYPE1 2213194-1 Fortimo SLM G5 LES 15 Standard 57 deg Wide 87 % 0.840 TE: OPTIC CLIP Z50 TYPE1 2213194-1 AC Zhaga COB 64 deg Wide 89 % 0.780 Optosource: SEHSMJD-A Mega Zenigata (GW6DME) 55 deg Wide 89 % 0.890 TE: 2213130-2 + OPTIC CLIP Z50 TYPE1 2213194-1 SLE G1 15mm 2000lm 927 Sunset R EXC 54 deg Wide 88 % 0.870 TE: 2213254-2 + OPTIC CLIP Z50 TYPE1 2213194-1 SLE G1 11mm 1000lm 927 Sunset R EXC 51 deg Wide 88 % 0.930 TE: 2213254-2 + OPTIC CLIP Z50 TYPE1 2213194-1 February 8th 2018 2:14 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 4 4 36.7 81 R 2 4 0. 7 49 Section view A-A Scale: 1:1 .9 .7 3 31 3 A A 2 2 2 1 INDEX PART NO DESCRIPTION MATERIAL COLOUR 1 2 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." PC PC metal Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Angelina-RZ Assy SIZE 1 PART NUMBER A4 SCALE D ANGELINA reflector ANGE-RZ-lens 1:1 WEIGHT 16,4 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.