+85°C Low Profile Radial Lead Aluminum Electrolytic Capacitors RSS For all general purpose applications FEATURES Suitable for dipped tantalum replacement Small case sizes Capacitance range: 1 µF to2200 µF Voltage range: 6.3 WVDC to 50 WVDC Solvent tolerant end seals standard SPECIFICATIONS Capacitance Tolerance ±20%at 120 Hz, 20°C Operating Temperature Range -40°C to +85°C Dissipation Factor 120Hz, 20°C Impedance Ratio (Max.) @120Hz Leakage Current WVDC 6.3 10 16 25 35 50 tan δ .25 .2 .17 .15 .12 .10 WVDC 6.3 10 16 25 35 50 -25°C/20°C 5 4 3 2 2 2 -40°C/20°C 10 8 6 4 4 4 WVDC ≤50WVDC Time 2 minutes .01 CV or 3 µA whichever is greater 1,000 hours, +85°C, with rated voltage Load Life ≤ 20% of initial measured value ≤ 200% of initial specified value ≤ initial specified value Capacitance change Dissipation factor Leakage current 500 hours at +85°C with no voltage applied. Units will meet load life specifications Shelf Life Frequency (Hz) Ripple Current Multipliers 50 0.8 120 1.0 SPECIAL ORDER OPTIONS • Special tolerances: ±10% (K), -10% + 30% (Q) 400 1.3 1K 1.45 Temperature (°C) 10K 1.65 100K 1.7 +85 1.0 +70 1.3 +60 1.5 +30 1.8 (See pages 33 thru 37) • Tape and Reel/Ammo-Pack • Cut, Formed, Cut and Formed, and Snap In Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 46 + 85°C Low Profile Radial Lead Aluminum Electrolytic Capacitors RSS STANDARD PART LISTING Maximum RMS Maximum Ripple Current ESR (mA) Ω 120Hz,+20°C 120Hz,+85°C Maximum Maximum RMS Ripple Current ESR (mA) Ω 120Hz,+20°C 120Hz,+85°C Dimensions DxL (mm) Capacitance (µF) WVDC 10 4x7 47 6.3 476RSS6R3M 7.055 80 5x7 20 4x7 47 16 476RSS016M 5.997 80 6.3x7 50.238 25 4x7 100 6.3 107RSS6R3M 4.145 90 6.3x7 475RSS035M 42.328 25 4x7 100 25 107RSS025M 2.487 135 8x9 475RSS050M 35.274 30 5x7 100 35 107RSS035M 1.989 160 10x9 PART NUMBER Capacitance (µF) WVDC 1.0 50 105RSS050M 165.786 2.2 50 225RSS050M 75.357 3.3 50 335RSS050M 4.7 35 4.7 50 PART NUMBER Dimensions DxL (mm) 16 106RSS016M 28.184 40 4x7 220 10 227RSS010M 1.507 165 8x9 35 106RSS035M 19.894 45 5x7 220 16 227RSS016M 1.281 202 10x9 10 50 106RSS050M 16.579 50 6.3x7 470 6.3 477RSS6R3M 0.882 238 10x9 22 16 226RSS016M 12.811 45 5x7 470 35 477RSS035M 0.423 524 12.5x15 22 35 226RSS035M 9.043 70 6.3x7 1000 16 108RSS016M 0.282 655 12.5x15 33 10 336RSS010M 10.048 50 5x7 1000 35 108RSS035M 0.199 1000 16x15 33 25 336RSS025M 7.536 70 6.3x7 2200 16 228RSS016M 0.153 940 16x15 15.0 MIN PVC SLEEVE Aluminum Electrolytic 10 10 d PHYSICAL DIMENSIONS - 6.3 (8) 10 (13) 16 (20) 25 (32) 35 (44) 50 (63) L1 4x7 3.3 19.0 MIN 4x7 2.2 1.0 + WVDC (SV) (µF) 4x7 4x7 5x7 6.3x7 10 4x7 5x7 22 5x7 6.3x7 33 5x7 100 6.3x7 220 6.3x7 8x9 8x9 470 12.5x15 12.5x15 2200 NOTE: Case Vent is standard on all diameter ≥8.0mm 10x9 10x9 10x9 1000 LEAD INFORMATION V.S. CASE DIAMETER 16x15 16x15 Convert to inches, divide by 25.4 D1 47 S1 6.3x7 5x7 4.7 DxL(mm) D 4.0 5.0 6.3 8 10 12.5 16 S 1.5 2.0 2.5 3.5 5.0 5.0 7.5 d 0.45 0.45 0.45 0.6 0.6 0.6 0.8 B 0.5 0.5 0.5 0.5 0.5 0.8 0.5 L1=L+1.0 mm Max. D≤8 mm L1=L+1.5 mm Max. D≥10 mm D1=D+B Max. S1=S±0.5mm ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 47