PIANO SWITCHES (FULL PITCH)
RoHS compliant
CFP
INTERNAL STRUCTURE
⑧
⑦
②
⑤
①
③
⑥
Part name
④
Material
Flammability
■ FEATURES
①
Cover
Polyphenylenesulphide
ORoHS compliant
OHigh-reliability
②
Slider
Polyamide
③
Housing
④
Slider contact
⑤
Fixed contact
■ APPLICATIONS
⑥
Terminal pin
O Communication devices, Air-conditioning equipment,
Vending machines and various control equipment
⑦
Piano lever
Polyamide
⑧
Piano cover
Polyphenylenesulphide
UL94V-0
Polyphenylenesulphide
Copper alloy, Gold-plated
–
UL94V-0
■ PART NUMBER DESIGNATION
C F P - 0 4 0 1 T B
Series name
Shape of terminal
Gull wing
Through hole pin
No. of bits
02： 2 bits
05： 5 bits
10：10 bits
03：3 bits
06：6 bits
04：4 bits
08：8 bits
ON direction
0：Upper
1：Lower
Structure
1：Flat lever (Without seal tape)
2：Convex lever (Without seal tape)
※ Please refer to the LIST OF PART NUMBERS when placing orders.
Form of packaging
Taping (Reel)
Magazine
CFP
PIANO SWITCHES (FULL PITCH)
■ LIST OF PART NUMBERS
Shape of terminals
No. of bits
ON direction
Structure
Form of packaging
Pieces in package
B（Gull wing）
Flat lever (without seal tape)
Upper
Convex lever (without seal tape)
2
Flat lever (without seal tape)
Lower
Convex lever (without seal tape)
Flat lever (without seal tape)
Upper
Convex lever (without seal tape)
3
Flat lever (without seal tape)
Lower
Convex lever (without seal tape)
Flat lever (without seal tape)
Upper
Convex lever (without seal tape)
4
Flat lever (without seal tape)
Lower
Convex lever (without seal tape)
Flat lever (without seal tape)
Upper
Convex lever (without seal tape)
5
Flat lever (without seal tape)
Lower
Convex lever (without seal tape)
Flat lever (without seal tape)
Upper
Convex lever (without seal tape)
6
Flat lever (without seal tape)
Lower
Convex lever (without seal tape)
Flat lever (without seal tape)
Upper
Convex lever (without seal tape)
8
Flat lever (without seal tape)
Lower
Convex lever (without seal tape)
Flat lever (without seal tape)
Upper
Convex lever (without seal tape)
10
Flat lever (without seal tape)
Lower
Convex lever (without seal tape)
Taping
CFP-0201TB
Magazine
CFP-0201MB
Taping
CFP-0202TB
Magazine
CFP-0202MB
Taping
CFP-0211TB
Magazine
CFP-0211MB
Taping
CFP-0212TB
Magazine
CFP-0212MB
Taping
CFP-0301TB
Magazine
CFP-0301MB
Taping
CFP-0302TB
Magazine
CFP-0302MB
Taping
CFP-0311TB
Magazine
CFP-0311MB
Taping
CFP-0312TB
Magazine
CFP-0312MB
Taping
CFP-0401TB
Magazine
CFP-0401MB
Taping
CFP-0402TB
Magazine
CFP-0402MB
Taping
CFP-0411TB
Magazine
CFP-0411MB
Taping
CFP-0412TB
Magazine
CFP-0412MB
Taping
CFP-0501TB
Magazine
CFP-0501MB
Taping
CFP-0502TB
Magazine
CFP-0502MB
Taping
CFP-0511TB
Magazine
CFP-0511MB
Taping
CFP-0512TB
Magazine
CFP-0512MB
Taping
CFP-0601TB
Magazine
CFP-0601MB
Taping
CFP-0602TB
Magazine
CFP-0602MB
Taping
CFP-0611TB
Magazine
CFP-0611MB
Taping
CFP-0612TB
Magazine
CFP-0612MB
Taping
CFP-0801TB
Magazine
CFP-0801MB
Taping
CFP-0802TB
Magazine
CFP-0802MB
Taping
CFP-0811TB
Magazine
CFP-0811MB
Taping
CFP-0812TB
Magazine
CFP-0812MB
Taping
CFP-1001TB
Magazine
CFP-1001MB
Taping
CFP-1002TB
Magazine
CFP-1002MB
Taping
CFP-1011TB
Magazine
CFP-1011MB
Taping
CFP-1012TB
Magazine
CFP-1012MB
: Not manufactured
※ Verify the above part numbers when placing orders.
Taping and magazine version can be supplied only in reel or stick units.
C（Through hole pins）
500 pcs./reel
CFP-0201MC
62 pcs./stick
500 pcs./reel
CFP-0202MC
62 pcs./stick
500 pcs./reel
CFP-0211MC
62 pcs./stick
500 pcs./reel
CFP-0212MC
62 pcs./stick
500 pcs./reel
CFP-0301MC
46 pcs./stick
500 pcs./reel
CFP-0302MC
46 pcs./stick
500 pcs./reel
CFP-0311MC
46 pcs./stick
500 pcs./reel
CFP-0312MC
46 pcs./stick
500 pcs./reel
CFP-0401MC
36 pcs./stick
500 pcs./reel
CFP-0402MC
36 pcs./stick
500 pcs./reel
CFP-0411MC
36 pcs./stick
500 pcs./reel
CFP-0412MC
36 pcs./stick
500 pcs./reel
CFP-0501MC
30 pcs./stick
500 pcs./reel
CFP-0502MC
30 pcs./stick
500 pcs./reel
CFP-0511MC
30 pcs./stick
500 pcs./reel
CFP-0512MC
30 pcs./stick
500 pcs./reel
CFP-0601MC
26 pcs./stick
500 pcs./reel
CFP-0602MC
26 pcs./stick
500 pcs./reel
CFP-0611MC
26 pcs./stick
500 pcs./reel
CFP-0612MC
26 pcs./stick
500 pcs./reel
CFP-0801MC
20 pcs./stick
500 pcs./reel
CFP-0802MC
20 pcs./stick
500 pcs./reel
CFP-0811MC
20 pcs./stick
500 pcs./reel
CFP-0812MC
20 pcs./stick
500 pcs./reel
CFP-1001MC
16 pcs./stick
500 pcs./reel
CFP-1002MC
16 pcs./stick
500 pcs./reel
CFP-1011MC
16 pcs./stick
500 pcs./reel
CFP-1012MC
16 pcs./stick
CFP
PIANO SWITCHES (FULL PITCH)
■ STANDARD SPECIFICATIONS
■ ELECTRICAL CHARACTERISTICS
Operating temp. range
Contact rating
Non-switching
Switching
Minimum
− 40 ~ 85 °C
Storage temp. range
Sealing
Net weight
Non-washable
Approx. 0.55 g (CFP-02)
Approx. 0.86 g (CFP-04)
Approx. 1.19 g (CFP-06)
Approx. 1.90 g (CFP-10)
Contact resistance
Approx. 0.70 g (CFP-03)
Approx. 1.03 g (CFP-05)
Approx. 1.54 g (CFP-08)
Insulation resistance
Dielectric strength
■ MECHANICAL CHARACTERISTICS
Operation angle
21 °
Operation force
7 N {0.71 kgf} maximum
10 N {1.02 kgf} 60 s
Solderability
245 ± 3 °C, 2 ~ 3 s
5 N {0.51 kgf} 10 s
Substrate bending
Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength
Shock
Flow：260 ± 3 °C, 5 ~ 6 s, two times maximum
Reflow：255 °C (Peak temperature)
（Please refer to the profile below）
Manual soldering：350 ± 10 °C, 3 ~ 4 s
Shear (Adhesion)
High temp. exposure
85 °C, 96 h
Low temp. exposure
−40 °C, 96 h
+5
0
℃
Temperature
Over 230 ℃
150
Pre Heating Zone
150 C
90±30 s
100
50
490 m/s2, 11 ms, 6 directions for 3 times each
−10 ~ 65 °C, Relative humidity 0 ~ 96 %,
24 h for 10 cycles
Thermal shock
Peak : 250
Amplitude 1.5 mm or Acceleration 98 m/s2,
10-500 Hz, 3 directions for 10 cycles each
Humidity
Reflow profile for soldering heat evaluation〉
180 C
AC500 V, 60 s
Continuous load 1000 cycles,
DC6 ± 0.5 V, 100 ± 10 mA
{ } : Reference only
200
1000 MΩ (DC100 V) minimum
Load life
5 N {0.51 kgf} 10 s
(℃)
250
50 mΩ maximum
■ ENVIRONMENTAL CHARACTERISTICS
Vibration
Stop strength
Soldering heat
DC50 V 100 mA
DC6 V, 100 mA DC24 V, 25 mA
DC20 mV 1 μA
30±10 s
Heating time
Soldering Zone
Reflow : two times maximum
− 40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles
CFP
PIANO SWITCHES (FULL PITCH)
■ OUTLINE DIMENSIONS
Unless otherwise specified, tolerance : ± 0.3 (Unit : mm)
OFlat lever, Through hole pin
+0.1
–0.05
L
10
8.6
8.6
0.25
7.62
L
0.6 min
OFlat lever, Gull wing
21
2.54±0.15
0.5 +0.1
–0.05
1.4
2.5
OConvex lever, Gull wing
0.25
+0.1
–0.05
2.5
OConvex lever, Through hole pin
L
1.4
0.9
Producion date code
0.9
Producion date code
21
0.2±0.1
3
6.7
7.5
21
0.6 min
1.4
0.25 +0.1
–0.05
1.5
1.5
10
8.6
8.6
L
2.54±0.15
7.62
0.6 +0.1
–0.05
0.6 min
0.2±0.1
3
6.7
21
7.5
0.6 min
Producion date code
Producion date code
1.4
0.25 +0.1
–0.05
1.4
0.6 +0.1
–0.05
Part number
2.54±0.15
0.5 +0.1
–0.05
1.4
2.5
Schematic
No. of bits. L dimension
2.54±0.15
Part number
2.5
Schematic
No. of bits. L dimension
CFP-02
2
7.5
CFP-06
6
17.7
CFP-03
3
10.05
CFP-08
8
22.8
CFP-04
4
12.6
CFP-10
10
27.9
CFP-05
5
15.15
■ RECOMMENDED P.C.B. PAD DIMENSIONS
■ SIZE OF P.C.B. PROCESSING
(Unit : mm)
P：No. of bits
2.54 × (P – 1)
2.5
2.54 × (P – 1)
(Unit : mm)
0
2.5
7.62
6.6
0
1
φ 1
P：No. of bits
CFP
PIANO SWITCHES (FULL PITCH)
■ PACKAGING SPECIFICATIONS
<Taping packaging specifications>
O Taping version are packaged in 500 pcs. per reel.
Orders will be accepted for units of 500 pcs., i.e., 500,
1000, 1500 pcs., etc.
O Taping version is boxed with 1 reel.
Maximum number of consecutive missing pieces = 2
Leader length and reel dimension are shown in the
diagrams below:
OReel dimensions
OEmbossed tape dimensions
25.4±1 (2, 3, 4, 5 bits)
33.4±1 (6 bits)
45.4±1 (8, 10 bits)
Empty
Filled
φ 21±0.8
End
φ 80±1
(2, 4, 6, 8 bits)
Empty
(Unit: mm)
(Conforms to JIS C 0806-3)
(In accordance with EIAJ ET-7200A)
2±0.5
Head
40 mm min.
20 pitches min.
φ 13±0.2
400 mm min.
Direction of feed
29.4±1 (2, 3, 4, 5 bits)
37.4±1 (6 bits)
49.4±1 (8, 10 bits)
φ 330±2
16±0.1
4±0.1
2±0.1
16±0.1
φ 1.5 +0.1
0
4±0.1
0.5±0.1
2±0.1
1.75±0.1
φ 1.5
+0.1
0
O6 bits, 8 bits, 10 bits
1.75±0.1
O2 bits, 3 bits, 4 bits, 5 bits
0.5±0.1
（CFP-0812B）
Installation example
B
0.2±0.05
D
B
C
C
（CFP-0411B）
Installation example
Direction of feed
7.5
R 0.75
<Magazine packaging specifications>
O Packing quantities of magazines are different depending
on the bit number of the switches.
Please order the multiple numbers of the specific
packing quantities. (e.g. 62 pcs., 124 pcs., 186 pcs.,
etc., in case of 2 bits version)
Pieces in package : 2 bits, 62 pcs./stick 3 bits, 46 pcs./stick
4 bits, 36 pcs./stick 5 bits, 30 pcs./stick
6 bits, 26 pcs./stick 8 bits, 20 pcs./stick
10 bits, 16 pcs./stick
+0.05
0
7.5
Direction of feed
No. of bits
B
C
D
2, 3, 4, 5
24
11.5 ± 0.1
———
6
32
14.2 ± 0.1
28.4 ± 0.1
8, 10
44
20.2 ± 0.1
40.4 ± 0.1