All Dimensions are in mm c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or omisions. DESCRIPTION OF LAST CHANGE ISSUE: A BY: AG RN: N/A DATE: 26/03/2011 Date Issue AG 03/04/2011 A PROJECTION ABAC.CDS.0008 B MAX A1 TYP D F MAX (NOTE 1) E H A2 TYP G (NOTE 2) DRAWING FOR QUOTATION PURPOSES ONLY. NOT TO BE WORKED TO. Issued By K 120 EXAMPLE PART NUMBER: 120 ABAC 14 W 17 35 S N M09 L J PRODUCT SERIES SHELL STYLE C2 TYP FINISH (TABLE 2) SHELL SIZE (TABLE 1) F MIN (NOTE 1) C1 TYP PANEL M3 X 0.5 - 6H 3 PLACES INSERT ARRANGEMENT PCB CONTACT TYPE P = PIN CONTACTS S = SOCKET CONTACTS TABLE 1A: CONNECTOR DIMENSIONS (SIZE 9 & 11) ORIENTATION SHELL SIZE 9 11 A1 18.26 20.62 A2 15.09 18.26 B MAX 24.1 26.5 C1 5.29 - 5.69 4.73 - 5.13 C2 3.05 - 3.45 3.05 - 3.45 D 20.80 - 20.90 20.80 - 20.90 E 13.90 - 14.00 13.90 - 14.00 F MIN 2.41 2.41 F MAX 7.86 7.86 J 14.3 18.1 H 7.36 - 7.46 7.36 - 7.46 K 19.70 - 19.80 23.50 - 23.60 L 8.8 12.6 MOD CODE (TABLE 3) NOTES: 1. DIMENSION COVERS RANGE OF TYPICAL CATALOGUE ITEMS, CONSULT FACTORY FOR CUSTOM REQUIREMENTS. 2. REFER TO TABLE 3 FOR STOCKED CONTACT TAIL DIMENSIONS. 3. CONSULT FACTORY FOR CUSTOM PCB INTERFACE REQUIREMENTS. B MAX A1 TYP D 4. CONNECTOR CAN BE REAR PANEL MOUNTED ONLY. REFER TO CATALOGUE OR MIL-DTL-38999 FOR PANEL CUT-OUT DETAILS. F MAX (NOTE 1) E 45 H A2 TYP G (NOTE 2) K L J TABLE 2: FINISH 90 REF QB W Q F C2 TYP M3 X 0.5 - 6H 4 PLACES F MIN (NOTE 1) C1 TYP PANEL TABLE 3: PCB CONTACTS CONTACT SIZE MOD CODE REF. 22D M03 22D M09 22D M10 20 M09 16 M09 PCB TABLE 1B: CONNECTOR DIMENSIONS (SIZE 13 TO 25) A1 23.01 24.61 26.97 29.39 31.75 34.93 38.1 A2 20.62 23.01 24.61 26.97 29.39 31.75 34.93 B MAX 28.9 31.3 33.6 36.8 40 43.2 46.3 C1 4.73 - 5.13 4.73 - 5.13 4.73 - 5.13 4.73 - 5.13 4.73 - 5.13 5.95 - 6.35 5.95 - 6.35 C2 3.05 - 3.45 3.05 - 3.45 3.05 - 3.45 3.05 - 3.45 3.05 - 3.45 3.71 - 4.11 3.71 - 4.11 D 20.80 - 20.90 20.80 - 20.90 20.80 - 20.90 20.80 - 20.90 20.00 - 20.10 20.00 - 20.10 20.00 - 20.10 E 13.90 - 14.00 13.90 - 14.00 13.90 - 14.00 13.90 - 14.00 14.70 - 14.80 14.70 - 14.80 14.70 - 14.80 F MIN 2.41 2.41 2.41 2.41 2.41 2.41 2.41 F MAX 7.86 7.86 7.86 7.86 7.86 7.86 7.86 H 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 J 20.46 23.52 26.81 29.36 32.67 36.05 39.02 K 25.86 - 25.96 28.92 - 29.02 32.20 - 32.30 34.76 - 34.86 38.07 - 38.17 41.45 - 41.55 44.42 - 44.52 L 14.96 18.02 21.3 23.86 27.17 30.55 33.52 G 0.70 0.70 0.50 0.70 1.15 M 8.50 4.00 5.10 5.10 5.10 G SHELL SIZE 13 15 17 19 21 23 25 FINISH DESCRIPTION ZINC COBALT BLACK PASSIVATE OLIVE DRAB CADMIUM ZINC COBALT GREEN PASSIVATE ELECTROLESS NICKEL M = CRITICAL CHARACTERISTIC GEOMETRIC TOLERANCE SYMBOLS MATERIAL: = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION) N/A CHARACTERISTIC SYM CHARACTERISTIC STRAIGHTNESS ANGULARITY FLATNESS RUN OUT ROUNDNESS POSITION CYLINDRICITY CONCENTRICITY PROFILE OF A LINE SYMMETRY PROFILE OF A SURFACE M.M.C. PARALLELISM SQUARENESS FOR EXPLANATION OF DIMENSIONS. TOLERANCES. NOTES. ETC. SEE BS308 A2 TITLE: SYM AB CONNECTORS LTD. DRAWN ALL DECIMAL PLACES HOLE DIAMETERS ANGULAR 2 0.1 FINISH: WALL MOUNTING RECEPTACLE WITH INTEGRAL PCB STAND OFF AG TOLERANCES UNLESS OTHERWISE STATED M A TT GROUP COMPANY Do not scale this drawing DATE 0.05 CHKD 03/04/2011 PL THIS DRAWING MAY ONLY BE ALTERED IF THE PART REMAINS INTERCHANGEABLE. IF NOT , A NEW DRAWING NUMBER MUST BE TAKEN. PRODUCT DRAWING NUMBER ABAC.CDS.0008 FINISH CODE VARN