VER : A_0 update : 2016.07.22 AC-DC Power Module AOC10 SERIES 10 Watts KEY FEATURES 5-Year Product Warranty Maximum No-Load Watts < 0.1W Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Low Ripple and Noise Isolation Class II CE and UL Approval (Pending) ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) Max Output Wattage (W) Voltage Frequency (Hz) Input Output Protection Isolation Environment Physical Safety EMC AOC10-12S AOC10-5S 10W AOC10-15S 90-264 VAC or 120-370 VDC ( N Connect +Vin ; L Connect –Vin ) 47-440 Hz Current (Full load) 220 mA max. (115 VAC) / 140 mA max. (230 VAC) Inrush Current 20 A max. (115 VAC) / 40 A max. (230 VAC) Leakage Current 0.25 mA max. External Fuse (mandatory) 2 A slow blow type External Varistor (mandatory) 14S471K Voltage (V.DC.) 5V Voltage Accuracy ±2% 12V 15V 24V 833 667 417 Current (mA) max 2000 Line Regulation (LL-HL) (typ.) ±0.2% Load Regulation (0-100%) (typ.) ±1% Minimum Load 0% Maximum Capacitive Load 7700uF Ripple & Noise (Vp-p) max <150mV Efficiency (at 230VAC) 80% Hold-up Time (at 230VAC) 30 ms min. Over Power Protection Hiccup technique, auto-recovery ±0.5% 1400uF 84% Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 3000V Operating Temperature -40°C…+70°C ( with derating ) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >450,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 1.46 x 1.08 x 0.79 Inches Case Material Plastic resin (flammability to UL 94V-0) Weight 35 g Cooling Method Free air convection Agency Approvals UL, cUL, CE (Pending) EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 55024 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 AOC10-24S 970uF 390uF <160mV 1% Vout 85% 85% ( 37.0 x 27.5 x 20.0 mm ) Tolerance 0.5 mm (Pending) (Pending) -1- VER : A_0 update : 2016.07.22 AC-DC Power Module AOC10 SERIES 10 Watts NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. It's necessary Varistor 14S471K at L / N input side in parallel. 3. It's necessary Fuse 250/2A at L input side in series connection. 4. It's recommended 10R / 15φ thermistor at L input side in series connection. 5. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw MECHANICAL DIMENSION ( Top View ) BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# Single 1 +Vo 2 GND 3 AC IN (L) 4 AC IN (N) 5 NC CONNECT DERATING -2-