Data Sheet: F-HDMI Thor F-HDMI-SMSC fiber extenders eliminate the limitations of traditional multimode or CAT5 HDMI extenders. This is a complete kit with transmitter and receiver for transparent HDMI connections over a single strand of SM-FOC up to 25km. Thor HDMI extenders offer full bi-directional signal transport between the transmitter and receiver. This allows return path information from the sink back to the source for services such as HDCP status, supported screen resolutions, Electronic display information, or any other information sent from the sink device at the receiver back to the source device at the transmitter. Thor also provides pre-terminated and connectorized singlemode fiber cables at any length. Thor FHDMI-SMSC fiber optic HDMI systems allow simple and inexpensive video links over any distance. With 6.25Gbps transmitter optics the video data can be sent at full rate without encoding or reducing quality. This allows video connections operating at 1080p60 at less than 10ms latency over 25km. With such a low delay, these extender kits satisfy all live video quality and latency requirements. Typical F-HDMI Application Technical Specifications Resolution: Interface: Audio Mode: Input/Output Max input/output Frequency Response Singal Noise Ratio Interface Optical Wavelength Receiver sensitivity Data Rate 720,1080, 800x600 to 1920x1200 HDMI Interface with HDCP Unballenced Stereo 10k/50 Ohms Stereo 5 dBu/4Vpp Stereo 20Hz – 20kHz >70 dB @ 1 kHz 3.5 mm 1310 nm -23 dBm 1.65 GHz © 2013 Thor Broadcast – All rights reserved. Input Optical Modulation Output Optical Modulation Relative Speed Return Wave Loss Dimensions (mm) Power Supply Max. Working Temp. Relative Humidity Contact: [email protected] 1-800-521-8467 <15 W 180 W -116 DB/Hz <10 dB 170x100x35 12 VDC @ 1.5 A 0 – 50 0 – 95