Series AM6T-NZ 6 Watt | DC-DC Converter FEATURES: • • • • • Operating temperature -40oC to + 85oC • Input / Output isolation 1500 and 3000VDC • Pin compatible with multiple manufacturers • Continuous short circuit protection Wide 2:1 input range Over Voltage Protection High efficiency up to 89% Low Ripple and Noise Models Single output Input Voltage (V) Output Voltage (V) Output Current max(mA) Isolation (VDC) Efficiency (%) AM6T-1203S-NZ AM6T-1205S-NZ AM6T-1212S-NZ AM6T-1215S-NZ AM6T-1224S-NZ AM6T-2403S-NZ AM6T-2405S-NZ AM6T-2409S-NZ AM6T-2412S-NZ AM6T-2415S-NZ AM6T-2424S-NZ AM6T-4803S-NZ AM6T-4805S-NZ AM6T-4812S-NZ AM6T-4815S-NZ 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 3.3 5 12 15 24 3.3 5 9 12 15 24 3.3 5 12 15 1400 1200 500 400 250 1400 1200 667 500 400 250 1400 1200 500 400 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 76 81 85 85 87 79 83 85 87 89 89 79 83 88 88 AM6T-0505SH30-NZ 4.5-9 5 1200 3000 76 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±600 ±250 ±200 ±600 ±250 ±200 ±600 ±250 ±200 1500 1500 1500 1500 1500 1500 1500 1500 1500 81 85 85 83 87 87 83 87 88 Model Models Dual output Model AM6T-1205D-NZ AM6T-1212D-NZ AM6T-1215D-NZ AM6T-2405D-NZ AM6T-2412D-NZ AM6T-2415D-NZ AM6T-4805D-NZ AM6T-4812D-NZ AM6T-4815D-NZ NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Absolute Max Input Voltage (1 Sec. Max.) Voltage range Nominal 12 Vin 24 Vin 48 Vin 12 24 48 Typical 9-18 18-36 36-75 F 051e R6 Units 25 50 100 VDC VDC π (Pi) Network Filter www.aimtec.com Maximum Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6T-NZ 6 Watt | DC-DC Converter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec 500 Vdc 100kV / 0.1V Maximum Units 1500 , 3000 > 1000 1000 VDC MOhm pF Output Specifications Parameters Voltage accuracy (single output) Voltage accuracy (dual output) Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Cross Regulation (dual) Conditions Typical 5% to 100% Load Balanced Load ±1 ±0.5 Maximum Units % % Continuous Auto-recovery Full Load, low to high 5% to 100% Load Main 50% load, Second 10 – 100% load Temperature coefficient Transient Recovery Time Transient Response Deviation Ripple& Noise Over Voltage Protection (1500 VDC Isolation models only) ±0.5 ±0.5 % % ±5 % o ±0.03 300 ±3 80 25% load step 25% load step %/ C µsec % mVp-p 110 to 140 %Vout Maximum Units 100 KHz o C o C o C General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Conditions Typical 100% load Derating above +71 300 -40 to +85 -55 to +125 Free air convection 95 Black Anodized Aluminum Plastic (UL94-V0) 1500Vdc Isolation 3000Vdc Isolation Case material Weight 1500Vdc Isolation 3000Vdc Isolation Dimensions(L x W x H) MTBF % 13 g 1.26 x 0.79 x 0.42 inches 32.00 x 20.00 x 10.80 mm 1.25 x 0.80 x 0.37 inches 31.80 x 20.30 x 9.50 mm o >1 000000 hrs(MIL-HDBK -217F, Ground Benign, t=+25 C) Safety Specifications Parameters Agency approvals Standards CE Information technology Equipment EMI - Conducted and radiated emission EN60950-1 55022 Class A (No external Circuit required) Pin Out Specifications Pin 2 3 9 11 14 16 22 23 1500VDC Single Dual -V Input -V Input No pin N.C. +V Output -V Output +V Input +V Input -V Input -V Input Common -V Output +V Output Common +V Input +V Input www.aimtec.com F 051e R6 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6T-NZ 6 Watt | DC-DC Converter Dimensions 1500VDC Dimensions 3000VDC Recommended Circuit MOV C3 TVS + DC DC Load + Vin FUSE +Vout LDM2 - Vin Optional Surge Circuit www.aimtec.com F 051e R6 - Vout Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6T-NZ 6 Watt | DC-DC Converter Model MOV TVS 12 Vin SMCJ28A 24 Vin S10K35 SMCJ48A 48 Vin S10K60 SMCJ90A Note: Fuse is user selectable C3 LDM2 680µF / 25V 120µF / 50V 120 µF / 100V 56 µH 56 µH Recommended Circuit For Ripple & Noise reduction- Single Output Single Output Dual Output +V output + V input + V input Cin Dual Output +V output + + DC DC Cin Cout - V input + Cout + DC DC - V input -V output Common + Cout -V output External Capacitor Tables Input Capacitor (Cin) Vin (VDC) Cin (uF) 12 24 48 100 10 ~ 47 10 ~ 47 Output Capacitor (Cout) Single Vout (VDC) 3.3 5 9 12 15 24 Derating Cout (uF) 10 10 10 10 10 10 Dual Vout (Vdc) Cout (uF) ±5 ±9 ±12 ±15 10 10 10 10 Free Air Convection 71º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6 Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only