Wire Wound Magnetically Shielded SMD Power Inductor ASPI-4030S Pb RoHS/RoHS II Compliant APPLICATIONS: FEATURES: • • • • 4.0 x 4.0 x 3.0 mm • • • • Shielded magnetics, low radiation Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a variety of DC-DC converter inductor applications Partable communication equipment OA equipment LCD, DVD, modem, set-top box DC/DC converters ELECTRICAL SPECIFICATIONS: Abracon P/N: ASPI-4030S Series Operating Temperature Storage Temperature -40ºC to +125ºC : -10ºC to +40ºC and 70% R.H. max : Part Number Inductance L Tolerance DC Resistance (±30%) Saturation Current Temperature Rise Current Self resonant frequency Inductance Code Marking Units μH − Ω A Max A Max MHz Min Symbol L N, M DCR Isat Irms SRF ASPI-4030S-R91 0.91 N 0.013 6.25 4.15 100 ASPI-4030S-1R0 1.0 N 0.014 5.26 4.15 70 1R0 ASPI-4030S-1R2 1.2 N 0.015 5.80 3.82 80 1R2 ASPI-4030S-1R5 1.5 N 0.020 4.84 3.34 62 1R5 ASPI-4030S-1R8 1.8 N 0.025 5.40 3.20 60 1R8 ASPI-4030S-2R2 2.2 N 0.030 4.90 2.95 52 2R2 ASPI-4030S-3R3 3.3 M 0.040 3.30 2.40 38 3R3 ASPI-4030S-4R3 4.3 M 0.055 2.95 2.10 37 4R3 ASPI-4030S-4R7 4.7 M 0.060 2.90 2.00 31 4R7 ASPI-4030S-5R6 5.6 M 0.065 2.60 1.95 30 5R6 ASPI-4030S-6R8 6.8 M 0.090 2.75 1.60 24 6R8 ASPI-4030S-7R5 7.5 M 0.085 2.20 1.65 26 7R5 ASPI-4030S-8R2 8.2 M 0.090 2.10 1.60 26 8R2 ASPI-4030S-100 10 M 0.100 1.95 1.50 21 100 ASPI-4030S-120 12 M 0.135 1.70 1.30 18 120 ASPI-4030S-150 15 M 0.190 1.65 1.11 16 150 ASPI-4030S-180 18 M 0.200 1.40 1.10 10 180 ASPI-4030S-220 22 M 0.225 1.30 1.00 10 220 ASPI-4030S-330 33 M 0.330 1.10 0.84 10 330 ASPI-4030S-360 36 M 0.335 1.05 0.83 9.8 360 ASPI-4030S-390 39 M 0.435 1.03 0.73 10 390 ASPI-4030S-470 47 M 0.445 0.95 0.72 8.4 470 ASPI-4030S-510 51 M 0.470 0.90 0.70 8.4 510 ASPI-4030S-560 56 M 0.555 0.85 0.65 8.4 560 ASPI-4030S-620 62 M 0.585 0.80 0.63 7.0 620 ASPI-4030S-680 68 M 0.868 0.72 0.52 7.0 680 ASPI-4030S-750 75 M 1.020 0.70 0.48 6.3 750 ASPI-4030S-820 82 M 1.060 0.66 0.47 5.6 820 ASPI-4030S-910 91 M 1.100 0.65 0.46 5.6 910 ASPI-4030S-101 100 M 1.150 0.60 0.45 5.6 101 ASPI-4030S-121 120 M 1.350 0.55 0.42 5.4 121 Test Conditions: a. Ambient Temperature: 20±15oC b. Relative Humidity: 65%±20% c. Air Pressure: 86KPa to 106KPa ABRACON IS ISO9001:2008 CE RTIFIED R91 Inductance (L): WK3260B LCR meter or equivalent, 100kHz, 1Vrms Direct Current Resistance (DCR): HIOKI 3540 or equivalent Saturation Current (Isat): WK3260B LCR meter or equivalent Isat: Based on inductance change (∆L/Lo :≤-30%) Temperature rise current (Irms): Electric Power, Electric current meter, Thermometer Irms: Based on temperature rise (∆T : 40oC TYP. ) Revised: 03.09.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wire Wound Magnetically Shielded SMD Power Inductor ASPI-4030S Pb RoHS/RoHS II Compliant 4.0 x 4.0 x 3.0 mm ELECTRICAL CHARACTERISTICS CURVES : PART IDENTIFICATION: ASPI-4030S - - : Tolerance M: ±20% * N: ±30% * Inductance Code Please refer to the table above *M for 3.3µH~120µH *N for 0.91µH~2.2µH Packaging T: Tape and Reel (2kpcs / reel) OUTLINE DIMENSIONS: Recommended Land Pattern c a b b A B C Max. D E F a Typ. b Typ. c Typ. 4.0±0.2 4.0±0.2 3.0 3.3±0.2 0.95±0.2 2.1±0.2 1.9 1.1 3.4 Dimensions: mm ABRACON IS ISO9001:2008 CE RTIFIED Revised: 03.09.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wire Wound Magnetically Shielded SMD Power Inductor ASPI-4030S Pb RoHS/RoHS II Compliant 4.0 x 4.0 x 3.0 mm Materials : No Components 1 Ferrite Core 2 Wire 3 Magnetic Glue 4 Plating Electrodes Plating: Ag/Ni/Sn Outer Electrodes Top surface solder coating: Sn96.5%/Ag3%/Cu0.5% 5 Material Ni-Zn Ferrite Polyurethane System enameled copper wire Epoxy resin and magnetic powder REFLOW PROFILE: ∆ ∆ ∆ ∆ ∆ ∆ Preheat condition: 150 ~200˚C /60~120sec. Allowed time above 217˚C: 60~90sec. Max temp: 260˚C Max time at max temp: 5sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max : TAPE & REEL: T: 2,000pcs / reel 1 2 . 4 + 0 . 2 /0 . 0 m m Ø330 Ø 1 3 . 0 + 0 . 2 /- 0 . 0 1 0 .7 5 ± 0 .2 Ø100 2 .3 ± 0 .2 M a x < 1 8 .4 m m F Ig . 9 . 1 . 3 A0 B0 W E F P0 P1 P2 D0 T K 4.3±0.1 4.3±0.1 12.0±0.3 1.75±0.1 5.5±0.1 4.0±0.1 8.0±0.1 2.0±0.1 1.5+0.1/-0.0 0.4±0.03 3.2±0.1 Storage Conditions a. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. b. Recommended conditions: -10oC ~ +40 oC, 70% RH (Max.) c. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used with one year from the time of delivery. d. In case of storage over 12 months, solderability shall be checked before actual usage. Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 03.09.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com