PBD10H150CS \ MBR10H150CT \ MBR10H150FCT \ MBR10H150DC SERIES ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS Voltage 150 V 10 A Current TO-252 Features Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. TO-220AB Low power loss, high efficiency. High current capability High junction temperature capability Lead free in compliance with EU RoHS 2011/65/EU directive Green molding compound as per IEC61249 Std. .(Halogen Free) (TO-252) Mechanical Data ITO-220AB Case: TO-252, TO-220AB, ITO-220AB, TO-263 package Terminals: solder plated, solderable per MIL-STD-750,Method 2026 TO-252 Weight: 0.0104 ounces, 0.297 grams TO-220AB Weight: 0.067 ounces, 1.89 grams. ITO-220AB Weight: 0.056 ounces, 1.6 grams. TO-263 TO-263 Weight: 0.051 ounces, 1.46 grams. 150V Marking: Part number TO-252 BD10H150CS TO-220AB MBR10H150CT ITO-220AB MBR10H150FCT TO-263 MBR10H150DC o Maximum Ratings And Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL 150V UNIT Maximum repetitive peak reverse voltage VRRM 150 V Maximum rms voltage VRMS 105 V VR 150 V Maximum dc blocking voltage Maximum average forward rectified per device current per diode Peak forward surge current : 8.3ms single half sinewave superimposed on rated load per diode Maximum forward voltage at 5A per diode Maximum dc reverse current at rated dc blocking voltage IF(AV) o TJ =125 C 120 A VF 0.85 V 0.5 A 1 mA IR TO-252 (Note 1) Typical thermal resistance TO-220AB(Note 1) TO-263(Note 1) 6 RθJC ITO-220AB(Note 1) Operating junction temperature range Storage temperature range A 5 IFSM o TJ =25 C 10 3 3 o C/W 7 TJ TSTG -55 to +175 o -55 to +175 o C C Note : 1. Device mounted on a infinite heatsink, then measured the center of the marking side. January 6,2015-REV.00 Page 1 IF, Forward Current (A) 6 5 4 3 2 1 per diode 0 0 25 50 75 100 125 150 175 TC, Case Temperature (°C) 1000 100 10 per diode 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 1000 TJ = 175°C 100 10 TJ = 125°C TJ = 150°C 1 0.1 TJ = 25°C TJ = 75°C 0.01 per diode IF, Forward Current (A) IR, Reverse Current (mA) Fig.1 Forward Current Derating Curve CJ, Junction Capacitance (pF) PBD10H150CS \ MBR10H150CT \ MBR10H150FCT \ MBR10H150DC SERIES 10 TJ = 175°C TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.001 per diode 10 20 30 40 50 60 70 80 90 100 0.01 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics January 6,2015-REV.00 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 PBD10H150CS \ MBR10H150CT \ MBR10H150FCT \ MBR10H150DC SERIES MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R - 3K per 13" plastic Reel January 6,2015-REV.00 Page 3 PBD10H150CS \ MBR10H150CT \ MBR10H150FCT \ MBR10H150DC SERIES MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 0.8K per 13" plastic Reel January 6,2015-REV.00 Page 4 PBD10H150CS \ MBR10H150CT \ MBR10H150FCT \ MBR10H150DC SERIES 0.419(10.66) 0.387(9.85) 0.196(5.00) 0.163(4.16) 0.156(3.95) 0.147(3.75) 0.177(4.5) MAX. 0.058(1.47) 0.042(1.07) 0.038(0.96) 0.019(0.50) 0.130(3.3) 0.114(2.9) 0.035(0.9)MAX. 0.108(2.75) 0.092(2.35) 0.108(2.75) 0.092(2.35) 0.100(2.55) January 6,2015-REV.00 0.543(13.8) 0.512(13.0) 0.055(1.4) 0.039(1.0) 0.177(4.5) 0.137(3.5) 0.236(6.0) 0.197(5.0) 0.055(1.4) 0.039(1.0) 0.055(1.4) 0.039(1.0) 0.028(0.7) 0.019(0.5) 0.146(3.7) 0.130(3.3) 0.189(4.8) 0.165(4.2) 0.606(15.4) 0.583(14.8) 0.110(2.8) 0.026(0.7) 0.011(0.3) 0.025(0.65)MAX. 0.100(2.55) 0.128(3.25) MIN. 0.406(10.3) 0.381(9.7) 0.134(3.4) 0.118(3.0) 0.418(10.6) 0.378(9.60) 0.357(9.1) 0.335(8.5) 0.055(1.4) 0.047(1.2) 0.115(2.92) 0.080(2.03) 0.100(2.54) 0.272(6.9) 0.248(6.3) 0.189(4.8) 0.137(4.4) 0.409(10.4) 0.387(9.80) 0.112(2.85) 0.100(2.55) 0.100(2.54) 0.50(12.7)MIN. 0.624(15.87) 0.548(13.93) 0.054(1.39) 0.045(1.15) 0.114(2.9) 0.098(2.5) 0.027(0.67) 0.022(0.57) Page 5 PBD10H150CS \ MBR10H150CT \ MBR10H150FCT \ MBR10H150DC SERIES Part No_packing code_Version BD10H150CS_L2_00001 BD10H150CS_S2_00001 MBR10H150CT_T0_00001 MBR10H150CT_T0_10001 MBR10H150DC_R2_00001 MBR10H150DC_R2_10001 MBR10H150FCT_T0_00001 MBR10H150FCT_T0_10001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D January 6,2015-REV.00 Page 6 PBD10H150CS \ MBR10H150CT \ MBR10H150FCT \ MBR10H150DC SERIES Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. January 6,2015-REV.00 Page 7