Lead (Pb) Free Product – RoHS Compliant LED395-series UV LED Lamp with UV resistant resin This series of LED395-xx is an InGaN LED mounted on a lead frame with a clear epoxy lens. On forward bias, it emits a band of visible light peaks 395nm. ● Specifications 1) Chip material 2) Peak wavelength 3) Package 4) Solder InGaN 395nm typ. Clear Silicone Resin Lead free ● Absolute Maximum Ratings Item Symbol Power Dissipation Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature PD IF VR TOPR TSTG TSOL Maximum Rated Value 200 50 5 -30 ~ +85 -40 ~ +100 265 Unit mW mA V °C °C °C Ambient Temperature Ta=25°C Ta=25°C Ta=25°C ● Electro-Optical Characteristics [Ta=25°C] Item Forward Voltage Reverse Current Radiated Power Peak Wavelength Half Width 17.08.2010 Symbol VF IR PO λP ∆λ Condition IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Minimum 390 led395_series.doc Typical 3.5 11 395 15 Maximum 4.0 10 400 Unit V uA mW nm nm 1 of 9 ● Characteristics of Radiant Intensity [Ta=25°C] Type LED395-01 LED395-02 LED395-03 LED395-04 LED395-05 LED395-06 LED395-09 LED395-46 LED395-41 LED395-42 LED395-31 LED395-33 LED395-34 LED395-36 Viewing Half Angle Radiant Intensity IF= 20mA [mW/sr] ± 8° ± 5° ± 10° ± 20° ± 50° ± 4° ± 25° (Long) ± 10° (Short) 45 55 45 Minimum Typical 18 5 Maximum Outer Dimension Dimension Figure Ø5 Ø5 Ø5 Ø5 Ø5 Ø5 1 2 3 4 5 6 Ø5 7 Oval ± 14° ± 20° ± 13° 16 ± 25° 7 Ø5 Ø4 Ø4 Ø3 Ø3 Ø3 Ø3 8 9 10 11 12 13 14 ► Radiated Power is measured by S3584-08. ► Radiation Intensity is measures by Ando Optical Multi Meter AQ2140 & AQ2741. 17.08.2010 led395_series.doc 2 of 9 ● Outer Diemnsion of LED Lamp 17.08.2010 Figure-1 Ø 5Mold (Type01) Figure-2 Ø 5Mold (Type02) Figure-3 Ø 5Mold (Type03) Figure-4 Ø 5Mold (Type04) Figure-5 Ø 5Mold (Type05) Figure-6 Ø 5Mold (Type06) Figure-7 Ø 5Mold (Type09) Figure-8 Ø 5Mold (Type46) Figure-9 Ø 4Mold (Type41) Figure-10 Ø 4Mold (Type42) led395_series.doc 3 of 9 17.08.2010 Figure-11 Ø 3Mold (Type31) Figure-12 Ø 3Mold (Type33) Figure-13 Ø 3Mold (Type34) Figure-14 Ø 3Mold (Type36) led395_series.doc 4 of 9 ● The Viewing half angle 17.08.2010 Figure-1 Ø 5Mold (Type01) Figure-2 Ø 5Mold (Type02) Figure-3 Ø 5Mold (Type03) Figure-4 Ø 5Mold (Type04) Figure-5 Ø 5Mold (Type05) Figure-6 Ø 5Mold (Type06) Figure-7 Ø 5Mold (Type09) Figure-8 Ø 5Mold (Type46) Figure-9 Ø 4Mold (Type41) Figure-10 Ø 4Mold (Type42) led395_series.doc 5 of 9 17.08.2010 Figure-11 Ø 3Mold (Type31) Figure-12 Ø 3Mold (Type33) Figure-13 Ø 3Mold (Type34) Figure-14 Ø 3Mold (Type36) led395_series.doc 6 of 9 17.08.2010 led395_series.doc 7 of 9 17.08.2010 led395_series.doc 8 of 9 Recommended Land Layout (mm) 17.08.2010 led395_series.doc 9 of 9