TDK B32686S2154563 Metallized polypropylene film capacitors (mfp) Datasheet

Film Capacitors
Metallized Polypropylene Film Capacitors (MFP)
Series/Type:
B32686S
Date:
December 2012
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Metallized polypropylene film capacitors (MFP)
Snubber
Typical applications
Snubbering
Filtering
IGBT
Climatic
Max. operating temperature: 110 °C
Climatic category (IEC 60068-1): 55/100/56
Construction
Dielectric: polypropylene (PP)
Film metallized on one side and
metal foils internally connected in series
Plastic case, epoxy resin sealing (UL 94 V-0)
Features
Very high pulse strength
High current
Highest possible contact reliability
RoHS-compatible
Terminals
Strap terminals, tinned copper (max. torque 10 Nm)
Marking
Manufacturer's logo, ordering code, style (MFP)
rated capaitance (coded), cap. tolerance (code letter),
rated DC voltage, date of manufacture (coded)
Delivery mode: Bulk (untaped)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 20
B32686S
B32686S
Snubber
Dimensional drawings
T1 (code no. 561)
T2 (code no. 562)
T3 (code no. 563)
T4 (code no. 564)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 20
B32686S
Snubber
Dimensional drawings (continued)
T5 (code no. 565)
T6 (code no. 566)
Overview of available types
Type
B32686S
VR (V DC)
1000
1250
1600
2000
VRMS (V AC)
400
450
450
500
CR (nF)
22
33
47
68
100
120
150
220
270
330
390
470
560
680
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 20
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
f≤1kHz
V DC V AC
nF
68
1000 400
68
100
100
120
120
150
150
150
220
220
220
270
270
270
330
330
330
330
330
330
390
390
390
390
390
390
470
470
470
470
Max. dimensions
w×h×l
mm
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
16.0 × 28.5 × 42.0
16.0 × 28.5 × 42.0
16.0 × 28.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
IRMS
100 kHz
A
4.0
4.0
4.5
4.5
4.5
4.5
5.5
5.5
5.5
7.0
7.0
7.0
7.5
7.5
7.5
8.5
8.5
8.5
8.5
8.5
8.5
9.0
9.0
9.0
9.0
9.0
9.0
10.0
10.0
10.0
10.0
ESR
100 kHz
mΩ
20
20
15
15
13
13
10
10
10
7
7
7
7
7
7
5
5
5
5
5
5
5
5
5
5
5
5
3
3
3
3
Ordering code
(composition see
below)
B32686S0683+563
B32686S0683+564
B32686S0104+563
B32686S0104+564
B32686S0124+563
B32686S0124+564
B32686S0154+563
B32686S0154+564
B32686S0154+565
B32686S0224+563
B32686S0224+564
B32686S0224+565
B32686S0274+563
B32686S0274+564
B32686S0274+565
B32686S0334+561
B32686S0334+562
B32686S0334+563
B32686S0334+564
B32686S0334+565
B32686S0334+566
B32686S0394+561
B32686S0394+562
B32686S0394+563
B32686S0394+564
B32686S0394+565
B32686S0394+566
B32686S0474+561
B32686S0474+562
B32686S0474+563
B32686S0474+566
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 20
Terminal
pcs./
MOQ
T3
T4
T3
T4
T3
T4
T3
T4
T5
T3
T4
T5
T3
T4
T5
T1
T2
T3
T4
T5
T6
T1
T2
T3
T4
T5
T6
T1
T2
T3
T6
224
384
224
384
224
384
192
288
288
160
192
192
144
128
128
96
96
104
96
96
96
96
96
104
96
96
96
108
108
72
108
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
f≤1kHz
V DC V AC
nF
560
1000 400
560
560
560
680
680
680
680
68
1250 450
68
100
100
100
120
120
120
150
150
150
220
220
220
270
270
270
270
270
270
330
330
330
330
Max. dimensions
w×h×l
mm
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
16.0 × 28.5 × 42.0
16.0 × 28.5 × 42.0
16.0 × 28.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
IRMS
100 kHz
A
11.0
11.0
11.0
11.0
12.0
12.0
12.0
12.0
4.5
4.5
5.0
5.0
5.0
5.5
5.5
5.5
6.5
6.5
6.5
8.5
8.5
8.5
9.0
9.0
9.0
9.0
9.0
9.0
10.0
10.0
10.0
10.0
ESR
100 kHz
mΩ
3
3
3
3
3
3
3
3
20
20
15
15
15
13
13
13
10
10
10
7
7
7
7
7
7
7
7
7
5
5
5
5
Ordering code
(composition see
below)
B32686S0564+561
B32686S0564+562
B32686S0564+563
B32686S0564+566
B32686S0684+561
B32686S0684+562
B32686S0684+563
B32686S0684+566
B32686S7683+563
B32686S7683+564
B32686S7104+563
B32686S7104+564
B32686S7104+565
B32686S7124+563
B32686S7124+564
B32686S7124+565
B32686S7154+563
B32686S7154+564
B32686S7154+565
B32686S7224+563
B32686S7224+564
B32686S7224+565
B32686S7274+561
B32686S7274+562
B32686S7274+563
B32686S7274+564
B32686S7274+565
B32686S7274+566
B32686S7334+561
B32686S7334+562
B32686S7334+563
B32686S7334+566
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 20
Terminal
pcs./
MOQ
T1
T2
T3
T6
T1
T2
T3
T6
T3
T4
T3
T4
T5
T3
T4
T5
T3
T4
T5
T3
T4
T5
T1
T2
T3
T4
T5
T6
T1
T2
T3
T6
108
108
72
108
48
48
72
48
224
384
192
288
288
192
288
288
160
192
192
144
128
128
96
96
104
96
96
96
108
108
72
108
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
f≤1kHz
V DC V AC
nF
390
1250 450
390
390
390
470
470
470
470
47
1600 450
47
68
68
68
100
100
100
120
120
120
150
150
150
150
150
150
220
220
220
220
Max. dimensions
w×h×l
mm
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
IRMS
100 kHz
A
11.0
11.0
11.0
11.0
12.0
12.0
12.0
12.0
5.0
5.0
6.0
6.0
6.0
7.0
7.0
7.0
7.5
7.5
7.5
8.5
8.5
8.5
8.5
8.5
8.5
10.5
10.5
10.5
10.5
ESR
100 kHz
mΩ
5
5
5
5
5
5
5
5
30
30
20
20
20
15
15
15
13
13
13
10
10
10
10
10
10
7
7
7
7
Ordering code
(composition see
below)
B32686S7394+561
B32686S7394+562
B32686S7394+563
B32686S7394+566
B32686S7474+561
B32686S7474+562
B32686S7474+563
B32686S7474+566
B32686S1473+563
B32686S1473+564
B32686S1683+563
B32686S1683+564
B32686S1683+565
B32686S1104+563
B32686S1104+564
B32686S1104+565
B32686S1124+563
B32686S1124+564
B32686S1124+565
B32686S1154+561
B32686S1154+562
B32686S1154+563
B32686S1154+564
B32686S1154+565
B32686S1154+566
B32686S1224+561
B32686S1224+562
B32686S1224+563
B32686S1224+566
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 20
Terminal
pcs./
MOQ
T1
T2
T3
T6
T1
T2
T3
T6
T3
T4
T3
T4
T5
T3
T4
T5
T3
T4
T5
T1
T2
T3
T4
T5
T6
T1
T2
T3
T6
108
108
72
108
48
48
72
48
224
384
192
288
288
144
128
128
144
128
128
96
96
104
96
96
96
108
108
72
108
B32686S
Snubber
Electrical specifications, ordering codes and packing units
VR
VRMS
CR
f≤1kHz
V DC V AC
nF
270
1600 450
270
270
270
22
2000 500
22
33
33
33
47
47
47
68
68
68
100
100
100
100
100
100
120
120
120
120
150
150
150
150
Max. dimensions
w×h×l
mm
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
30.0 × 45.0 × 42.0
12.0 × 22.5 × 42.0
12.0 × 22.5 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
14.0 × 25.0 × 42.0
16.0 × 28.5 × 42.0
16.0 × 28.5 × 42.0
16.0 × 28.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
20.0 × 39.5 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
28.0 × 37.0 × 42.0
IRMS
100 kHz
A
11.5
11.5
11.5
11.5
4.0
4.0
5.0
5.0
5.0
6.0
6.0
6.0
7.5
7.5
7.5
8.5
8.5
8.5
8.5
8.5
8.5
9.0
9.0
9.0
9.0
10.0
10.0
10.0
10.0
ESR
100 kHz
mΩ
7
7
7
7
70
70
50
50
50
30
30
30
20
20
20
15
15
15
15
15
15
13
13
13
13
10
10
10
10
Ordering code
(composition see
below)
B32686S1274+561
B32686S1274+562
B32686S1274+563
B32686S1274+566
B32686S2223+563
B32686S2223+564
B32686S2333+563
B32686S2333+564
B32686S2333+565
B32686S2473+563
B32686S2473+564
B32686S2473+565
B32686S2683+563
B32686S2683+564
B32686S2683+565
B32686S2104+561
B32686S2104+562
B32686S2104+563
B32686S2104+564
B32686S2104+565
B32686S2104+566
B32686S2124+561
B32686S2124+562
B32686S2124+563
B32686S2124+566
B32686S2154+561
B32686S2154+562
B32686S2154+563
B32686S2154+566
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 20
Terminal
pcs./
MOQ
T1
T2
T3
T6
T3
T4
T3
T4
T5
T3
T4
T5
T3
T4
T5
T1
T2
T3
T4
T5
T6
T1
T2
T3
T6
T1
T2
T3
T6
48
48
72
48
224
384
192
288
288
160
192
192
144
128
128
96
96
104
96
96
96
96
96
104
96
108
108
72
108
B32686S
Snubber
Technical data
Operating temperature range
Dissipation factor tan δ
at 20 °C
(upper limit values)
Max. operating temperature Top,max
Upper category temperature Tmax
Lower category temperature Tmin
Rated temperature TR
1.0 10-3 (at 10 kHz)
3.0 10-3 (at 10 kHz)
+110 °C
+100 °C
55 °C
+85 °C
CR ≤ 0.33 µF
CR > 0.33 µF
Insulation resistance Rins
or time constant τ = CR Rins
100 GΩ
30000 s
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
2.0 VR, 2 s
TA (°C)
DC voltage derating
AC voltage derating
Category voltage VC
(continuous operation with VDC TA ≤ 85
VC = VR
VC,RMS=VRMS
or VAC at f ≤ 1 kHz)
85<TA≤100 VC = VR (165TA)/80 VC,RMS=VRMS (165TA)/80
TA (°C)
DC voltage (max. hours) AC voltage (max. hours)
Operating voltage Vop for
short operating periods
TA ≤ 85
Vop = 1.25 VC (2000 h) Vop = 1.0 VC,RMS (2000 h)
(VDC or VAC at f ≤ 1 kHz)
85<TA≤100 Vop = 1.25 VC (1000 h) Vop = 1.0 VC,RMS (1000 h)
Damp heat test
56 days/40 °C/93% relative humidity
Limit values after damp
Capacitance change ∆C/C
≤ 2%
heat test
Dissipation factor change ∆ tan δ
≤ 1.0 10-3 (at 10 kHz)
Insulation resistance Rins
≥ 50% of minimum
or time constant τ = CR Rins
as-delivered values
Reliability:
Failure rate λ
1 fit (≤ 1 10-9 /h) at 0.5 VR, 40 °C
Service life tSL
200 000 h at 1.0 VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Failure criteria:
Total failure
Short circuit or open circuit
Failure due to variation
Capacitance change ∆C/C
> 10%
of parameters
Dissipation factor tan δ
4 upper limit value
Insulation resistance Rins
< 1500 MΩ (CR≤0.33 µF)
or time constant τ = CR Rins
< 500 s (CR>0.33 µF)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 20
B32686S
Snubber
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt and k0 values
VR (V DC)
1000
1250
1600
2000
VRMS (V AC)
400
450
450
500
k0 in V2/µs
4 000 000
7 000 000
11 000 000
18 000 000
dV/dt in V/µs
2 000
2 800
3 500
4 500
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 20
B32686S
Snubber
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
1000 V DC/400 V AC
1250 V DC/450 V AC
1600 V DC/450 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
2000 V DC/500 V AC
Page 11 of 20
B32686S
Snubber
Mounting guidelines
1
Soldering
1.1
Solderability of leads
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
235 ±5 °C
Soldering time
2.0 ±0.5 s
Immersion depth
2.0 +0/0.5 mm from capacitor body or seating plane
Evaluation criteria:
Visual inspection
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
MKP (lead spacing ≤ 7.5 mm)
MKT uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 20
10 ±1 s
5 ±1 s
<4s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
B32686S
Snubber
Immersion depth
2.0 +0/0.5 mm from capacitor body or seating plane
Shield
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor
body and liquid solder
Evaluation criteria:
Visual inspection
∆C/C0
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
Page 13 of 20
B32686S
Snubber
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper category temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable countermeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 °C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 °C
MKT 160 °C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled after the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following measures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 20
B32686S
Snubber
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed description can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Storage conditions
Flammability
Resistance to
vibration
Safety information
Reference chapter
"General technical
information"
Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Avoid external energy, such as fire or electricity
5.3
(passive flammability), avoid overload of the
"Flammability"
capacitors (active flammability) and consider the
flammability of materials.
Do not exceed the tested ability to withstand
5.2
vibration. The capacitors are tested to
"Resistance to vibration"
IEC 60068-2-6.
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 20
B32686S
Snubber
Topic
Safety information
Soldering
Do not exceed the specified time or temperature
limits during soldering.
Cleaning
Use only suitable solvents for cleaning capacitors.
Embedding of
When embedding finished circuit assemblies in
capacitors in
plastic resins, chemical and thermal influences
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 20
Reference chapter
"Mounting guidelines"
1 "Soldering"
2 "Cleaning"
3 "Embedding of
capacitors in finished
assemblies"
B32686S
Snubber
Symbols and terms
Symbol
α
αC
A
βC
C
CR
∆C
∆C/C
∆C/CR
dt
∆t
∆T
∆tan δ
∆V
dV/dt
∆V/∆t
E
ESL
ESR
f
f1
f2
fr
FD
FT
i
IC
English
Heat transfer coefficient
Temperature coefficient of capacitance
Capacitor surface area
Humidity coefficient of capacitance
Capacitance
Rated capacitance
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Capacitance tolerance (relative deviation
from rated capacitance)
Time differential
Time interval
Absolute temperature change
(self-heating)
Absolute change of dissipation factor
Absolute voltage change
Time differential of voltage function (rate
of voltage rise)
Voltage change per time interval
Activation energy for diffusion
Self-inductance
Equivalent series resistance
Frequency
Frequency limit for reducing permissible
AC voltage due to thermal limits
German
Wärmeübergangszahl
Temperaturkoeffizient der Kapazität
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
Nennkapazität
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
Kapazitätstoleranz (relative Abweichung
vom Nennwert)
Differentielle Zeit
Zeitintervall
Absolute Temperaturänderung
(Selbsterwärmung)
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
Differentielle Spannungsänderung
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
Ersatz-Serienwiderstand
Frequenz
Grenzfrequenz für thermisch bedingte
Reduzierung der zulässigen
Wechselspannung
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
Resonant frequency
Resonanzfrequenz
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
Category current (max. continuous
Kategoriestrom (max. Dauerstrom)
current)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 20
B32686S
Snubber
Symbol
IRMS
iz
k0
LS
λ
λ0
λtest
Pdiss
Pgen
Q
ρ
R
R
Ri
Rins
RP
RS
S
t
T
τ
tan δ
tan δD
tan δP
tan δS
TA
Tmax
Tmin
tOL
Top
TR
Tref
tSL
VAC
English
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
Pulse characteristic
Series inductance
Failure rate
Constant failure rate during useful
service life
Failure rate, determined by tests
Dissipated power
Generated power
Heat energy
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Temperature
Time constant
Dissipation factor
Dielectric component of dissipation
factor
Parallel component of dissipation factor
Series component of dissipation factor
Ambient temperature
Upper category temperature
Lower category temperature
Operating life at operating temperature
and voltage
Operating temperature
Rated temperature
Reference temperature
Reference service life
AC voltage
Please read Cautions and warnings and
Important notes at the end of this document.
German
(Sinusförmiger) Wechselstrom
Inkonstanz der Kapazität
Impulskennwert
Serieninduktivität
Ausfallrate
Konstante Ausfallrate in der
Nutzungsphase
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
Innenwiderstand
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
Temperatur
Zeitkonstante
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
Parallelanteil des Verlfustfaktors
Serienanteil des Verlustfaktors
Umgebungstemperatur
Obere Kategorietemperatur
Untere Kategorietemperatur
Betriebszeit bei Betriebstemperatur und
-spannung
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Wechselspannung
Page 18 of 20
B32686S
Snubber
Symbol
VC
VC,RMS
English
Category voltage
Category AC voltage
VCD
Vch
VDC
VFB
Vi
Vo
Vop
Vp
Vpp
VR
Corona-discharge onset voltage
Charging voltage
DC voltage
Fly-back capacitor voltage
Input voltage
Output voltage
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Amplitude of rated AC voltage
R
VRMS
German
Kategoriespannung
(Sinusförmige)
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
Gleichspannung
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Impuls-Spitzenspannung
Spannungshub
Nennspannung
Amplitude der Nenn-Wechselspannung
VSC
Vsn
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
Snubber capacitor voltage
Z
Impedance
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
(Sinusförmige) Wechselspannung
Page 19 of 20
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 20 of 20