ADP Series Special for LCD Power supply WIDE INPUT, NON-ISOLATED & REGULATED SINGLE POSITIVE OR NEGATIVE OUTPUT FEATURES l Apply to LCD display l Small footprint, thickness less than 7mm l Wide input 5 to 12VDC l Industry standard pinout l Free air convection l No heat sink required l Output voltage adjustable l Remote ON/OFF multi-country patent protection RoHS PRODUCT PROGRAM Part Number Input Voltage(VDC) ON/OFF Function Range ADP05C24 No ADP05C24A Yes 5.0-12 Output Voltage Characteristic Nominal Negative Voltage output non-adjustable Negative Voltage output adjustable 5.0 ADP0524A Yes ADP0528A Yes Positive Voltage output adjustable Positive Voltage output adjustable ON/OFF Function: Refer to recommended circuit. OUTPUT SPECIFICATIONS Item APPLICATIONS Output Voltage （Vout） ADP series are specially designed for Part Number Test Conditions ADP05C24 Vin=5.0-12V, RL=2K Refer to recommended circuit ADP05C24A ADP0524A ADP0528A Vin=5V, Radj=0-20kΩ, ON/OFF connect to GND, Refer to recommended circuit Min Max -25 -23 -25 -6.5* 6* 25 6* 30 Units V LCD display, these produces have wide output voltage adjustable range, and function of remote ON/OFF, free air convection, and No heat sink required while use. ADP05C24 Ripple& Noise ADP05C24A ADP0524A ADP0528A Vin=5.0-12V, RL =2K,Cout=100μF Refer to recommended circuit ADP05C24A ADP0524A MORNSUN Science & Technology Co.,Ltd. Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China. Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com mVp-p 200 450 61 Vin=5V, RL =2K, Radj =0Ω, ON/OFF connect to GND, Refer to recommended circuit 60 % 61 60 ADP0528A Note: 200 Vin=5-12VDC, RL =2K, Radj =0-20kΩ ON/OFF connect to GND, Cout=100μF Refer to recommended circuit ADP05C24 Efficiency (η) 200 *When Vin change at 5.0-12V, adjustable IVoutI (min) will change between 6-12V; COMMON SPECIFICATION Item Test Conditions Min Typ Storage Humidity Storage Temperature Operating Temp. -40 Power derating (above 60°C) Lead Temperature % 71 15 1.5mm from case for 10 seconds o C 300 Cooling Free air convection Case material MTBF Units 95 125 -20 Temp. rise at full load Max Plastic (UL94-V0) 25℃（MIL-HDBK-217F） Weight 1000 K hours 4.0 g Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified; 2.The nominal value is -24V, 24V or 28V. The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. ADP A/3-2012 Page 1 of 2 TYPICAL CHARECTERISTICS Temperature Derating Graph 60 80 Operating Temp.( C ) OUTLINE DIMENSIONS & FOOTPRINT DETAILS RECOMMENDED FOOTPRINT 9.50 [0.374] 0.50[0.020] MECHANICAL DIMMENSIONS (Front View) Φ 1.00 [0.039] 4.10[0.161] 1 2 3 4 5 0.30[0.012] Note: grid 2.54*2.54mm. (Bottom View) 9 10 11 12 TUBE OUTLINE DIMMENSIONS 17.78 [0. 700] 22.86 [0. 900] 27.94 [1. 100] 37.90 [1. 492] Pin 1 9.60 [ 0.378] FOOTPR IN T DETAILS ADP05C24 ADP_A series NC NC Discript ion No conne ct ion 2 Vin Vin I nput 3 GND GND Common groud 4 NC ON/ OFF Cont rol 5 NC ADJ Out put adjust 9 NC NC No conne ct ion 10 NC NC No conne ct ion 11 NC NC No conne ct ion 12 Vout Vout Out put Note: Unit: mm[ inch] Pin section tolerances :±0.10mm [± 0.004inch ] General tolerances: ±0.2 5 mm[ ±0.010 inch ] 12.40 [0.488] 12.70 [ 0.500] 16.90[0.665] 1 2 3 4 5 6.95[0.274] 1.50[0.059] 0.50 [0.020] 9 10 11 12 4.9 0 [0.193] Note: Unit: mm[ inch] General tolerances : ±0.50mm [± 0.020in ch] L=5 30mm[ 20.866inch ] Devices per tube quantity 13 : pcs L=2 20mm[ 8.661inch ] Devices per tube quantity : 5pcs Short tube inner packaging dimensions :255*170*8 0mm ； Short tube outer packaging dimensions (with ( six inner packaging): 375*280*270mm ； Long tube inner packaging dimensions :580 *200*100mm ； Long tube outer packaging dimensions(with two inner packaging): 600*215*220mm ； Long tube outer packaging dimensions(with three inner packaging): 600*215*325mm 。 RECOMMENDED CIRCUIT MORN SUN CNYYWW ADP05C24 MORNSUN LCD DC/DC CO NVERTER Vin:5 ～12VD C Vout:XXXVDC CNY YWW ADP05XX XXA LCD DC/DC CONVERTER Vin:5 ～12VD C Vou t:X XXVDC Vout Vout GND ＋ Cin Vin Cout ＋ Vin RL ＋ Cin W 2 0K Cout RL GND Note: 1. When use the convertor, filter capacitors should be connected to the input and output end, to reduce ripple and noise. 2. Output voltage adjustor “W” is recommended to use 20KΩ, when “W”=0Ω, IVoutI=max; “W”=20KΩ, IVoutI=min. 3. ON/OFF function: when switch close, natural output; when switch open, output shutdown. 4. ADJ pin is not allowed to open, or it may cause damage to the device. The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. ADP A/3-2012 Page 2 of 2