Keysight M3100A PXIe Digitizers with Optional Real-Time Sequencing and FPGA Programming 100 MSa/s, 14 Bits, 4/8 Channels Data Sheet 02 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Improve Your Measurement Fidelity, Signal Integrity and Measurement Throughput The M3102A are high-performance, high-bandwidth digitizers with an advanced data acquisition system (DAQ). Performance meets simplicity thanks to easy-touse programming libraries, real-time sequencing technology (HVI Hard Virtual Instrumentation), and graphical FPGA programming technology. Features 100 MSa/s simultaneous sampling, 14 bits, 4/8 channels, 100 MHz BW 1 Advanced data acquisition system (DAQ) –– Flexible triggering (HW trigger, HVI trigger, SW trigger) –– Programmable cycles and data bursts to avoid PC saturation Optional HW programming for high-performance applications –– Real-time sequencing (HVI technology) –– FPGA programming –– Xilinx Kintex-7, 325T or 410T FPGA Up to 2 GB of onboard RAM (~ 1 Gsamples) Mechanical/interface –– 1 slot 3U (PXIe) –– Up to 1.6 GB/s transfer BW with P2P capabilities (PCIe Gen 2) –– Independent DMA channels for fast and efficient data transfer Applications General purpose digitizer Hardware-in-the-loop (HIL)/automated test equipment (ATE) R&D/scientific research equipment Aerospace & defense (A/D) 1. 100 MHz refer to the Front End bandwidth. This digitizer can operate in 1st and 2nd Nyquist zones (using undersampling technique), but its real-time BW is limited by Nyquist to some 50 MHz. As an example for a band-limited signal of 70 MHz with a 10 MHz signal bandwidth the aliased component will appear between 25 to 35 MHz (30 ± 5 MHz). 03 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Programming Technology and Software Tools Software programming –– Easy-to-use native programming libraries for most common languages: C, C++, Visual Studio, LabVIEW, MATLAB, Python, and more Hardware programming (optional) –– Real-time sequencing (Hard Virtual Instrumentation or HVI technology) –– Graphical flowchart-style M3601A design environment (-HV1 option required on HW) –– Ultra-fast, fully-parallelized hard real-time execution –– Ultra-fast, time-deterministic decision-making –– Off-the-shelf inter-module synchronization & data exchange –– FPGA programming –– Graphical M3602A FPGA design environment (-FP1 option required on HW) –– No FPGA know-how required –– Include high-level to low-level design elements: off-the-shelf DSP blocks, MATLAB/ Simulink designs, Xilinx CORE Generator IP cores, Xilinx VIVADO/ISE projects, VHDL or Verilog code –– Ultra-fast, one-click compiling and on-the-fly programming No programming –– Ready-to-use SD1 SPF (software front panels) PXIe Arbitrary Waveform Generators, Digitizers and Combination Modules Outputs (AWGs) Inputs (Digitizers) Product Type Speed (MSa/s) Bits Ch BW (MHz) M3202A AWG 1000 14 2/4 DC-400 M3201A AWG 500 16 2/4 DC-200 M3102A M3100A M3302A Combo 500 16 2 M3300A Combo 500 16 2/4 Speed (MSa/s) Bits Ch BW (MHz) Digitizer 500 Digitizer 100 14 2/4 DC-200 14 4/8 DC-100 DC-200 500 14 2 DC-200 DC-200 100 14 4/8 DC-100 04 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Functional Block Diagram Channel 1 Channel 1 output Channel x Input settings Full scale, Z, coupling (as available) Channel x output Prescaler ÷ Data acquisition (DAQx) Analog trigger Channel n Channel n output Figure 1. M3100A input functional block diagram, all channels have identical input structure Ordering Information 1 Product Description M3100A PXIe digitizer: 100 MSa/s, 14 Bits Options Description M3100A-CH4 / -CH8 Four channels 2 / eight channels M3100A-CLF Fixed sampling clock, low jitter 2 M3100A-M01 / -M12 / -M20 Memory 16 MB, 8 MSamples 2 / 128 MB, 60 MSamples / 2 GB, 1 GSamples HW programming options Description M3100A-HVI Enabled HVI programming, requires an HVI design environment license (M3601A) M3100A-FP1 Enabled FPGA programming, requires -K32 or -K41 option and an FPGA design environment license (M3602A) M3100A-K32 / -K41 FPGA, Xilinx 7K325T / 7K410T, required for -FP1 option only (needs memory option -M20) Related software Description M3601A HVI design environment M3602A FPGA design environment 1. All options must be selected at time of purchase and are not upgradable 2. These options represent the standard configuration 05 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Technical Specifications and Characteristics General characteristics M3100A-CH4 Parameter Min Typ Max M3100A-CH8 Min Typ Max Units Comments Inputs and outputs Channels 4 8 Out Reference clock 1 1 1 Out Reference clock 2 1 1 In 1, 3 1 1 In/out Reconfigurable Triggers/markers 2, 3 8 8 In/out Reconfigurable Sampling rate 100 100 MSa/s Voltage resolution 14 14 Bits Triggers/markers Input channels overview Input frequency DC Real-time BW Time skew 100 DC 50 100 50 <50 MHz MHz <50 ps Between channels Built-in functionalities Input conditioning blocks 4 8 1 per channel Analog trigger processors 4 8 1 per channel Data acquisition blocks 4 8 1 per channel Onboard memory RAM memory 16 2048 1. At front panel 2. At backplane 3. Markers available from firmware version v3.0 or later 16 2048 MBytes 06 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet I/O specifications Analog input characteristics Number of channels CH4 or CH8 Sampling rate 100 MSa/s option CLF Configurable inputs: impedance 50Ω or 1 MΩ (HiZ) Configurable inputs: Coupling AC or DC Input voltage range (50Ω) 400 mVpp to 6Vpp (continue: variable attenuator at input) Input voltage range (HiZ) 200 mVpp to 20Vpp (continue: variable attenuator at input) Bandwidth limit filters 100 MHz Effective number of bits (ENOB)1 10.8 bits @30MHz (typical) Noise floor −142 dBm/Hz @30 MHz (typical) SINAD 67 dB @30 MHz (typical) Spurious free dynamic range (SFDR) + Total Harmonic Distorsion 79 dBc (typical) 1. measured at -1 DBFS input signal with 1.5 Vpp 50Ω M3100A Parameter Min Typ Max Units Comments Reference clock output Frequency 10 or 100 MHz Generated from the internal clock. User selectable Voltage 800 mVpp On a 50 Ω load Power 2 dBm On a 50 Ω load Source impedance 50 Ω AC coupled External I/O trigger/marker VIH 2 5 V VIL 0 0.8 V VOH 2.4 3.3 V On a high Z load VOL 0 0.5 V On a high Z load Input impedance 10 KΩ Source impedance TTL – Speed 500 Mbps 07 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Data acquisition blocks (DAQs) specifications M3100A-CH4 Parameter Min Typ M3100A-CH8 Max Min Typ Max Units Comments General specifications DAQs 4 Aggregated speed 8 400 Acquisition burst multiple 800 5 Acquisition RAM capacity 15 Acquisition RAM capacity effic. Trigger 1 per channel 5 957M 15 957M 93.5 93.5 Selec. Selec. MSa/s For all onboard DAQs combined Samples Burst length must be a multiple of this value Samples Maximum depends on onboard RAM % Effic. = waveform size / waveform size in RAM Hardware trigger (analog channels, input trigger, backplane triggers), software trigger DAQ specifications Speed 100 Resolution 100 14 14 MSa/s Bits Clock system specifications M3100A-CH4 Parameter Min Typ Max M3100A-CH8 Min Typ Max Units General specifications Clock frequency 100 100 MHz Comments Per DAQ 08 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet System Specifications Environmental specifications (PXI Express) M3100A-CH4 Parameter Min Typ M3100A-CH8 Max Min Typ Max Units Comments Slot PXI Express (CompactPCI Express compatible) – Automatic gen negotiation, chassis dependent System bus Slots PCI Express type 1 Gen 1 PCI Express link 1 Gen 2 Gen 1 Gen 2 1 4 1 4 Lanes Automatic lane negotiation, chassis dependent PCI Express speed 400 1600 400 1600 MBytes/s Depends on # of lanes, chassis, congestion, and more Sustainable throughput 200 800 200 800 MPoints/s Depends on # of lanes, chassis, congestion, and more Power dissipation 3.3V PXIe power supply 1.5 1.5 A ~5W 12V PXIe power supply 2 2 A ~ 24 W Environmental 1 Temperature range Operating Non-operating 0 to +55°C (10,000 feet) -40 to +70 °C (up to 15,000 feet) Max operative altitude 2000 m (10,000 feet) Operating Humidity range (%RH) 10 to 95% at 40 °C Non-operating Humidity range (%RH): 5 to 95 5 to 95% Calibration interval 1 year EMC Complies with European EMC Directive – IEC/EN 61326-1 – CISPR Pub 11 Group 1, class A This ISM device is in compliance with Canadian ICES-001 Cet appareil ISM est conforme à la norme NMB-001 du Canada. This ISM device is in compliance with Australian and New Zealand RCM This ISM device is in compliance with South Korea EMC KCC 1. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of Storage, Transportation and End-use; those stresses include but are not limited to temperature, humidity, shock, vibration, altitude and power line conditions. Test Methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3. 09 | Keysight | M3100A PXIe Digitizer with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Evolving Since 1939 Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight. myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. http://www.keysight.com/find/emt_product_registration Register your products to get up-to-date product information and find warranty information. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Keysight Services www.keysight.com/find/service Keysight Services can help from acquisition to renewal across your instrument’s lifecycle. Our comprehensive service offerings—onestop calibration, repair, asset management, technology refresh, consulting, training and more—helps you improve product quality and lower costs. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/m3100a For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-9-7-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2017 - 2018 Published in USA, February 20, 2018 5992-1806EN www.keysight.com