IQD CXOXULP-3.3V Crystal clock oscillator specification Datasheet

Crystal Clock Oscillator Specification
CXOXULP 3.3V
ISSUE 1; April 2016
Description
The CXOXULP 32.7680kHz oscillator achieves the low power
comparable with a tuning fork design and the fast start up and
tight frequency stability attained by an AT-cut crystal design.
Designed for applications requiring ultra low current (15µA),
fast start up time (15ms) and a tight frequency stability
(±30ppm to ±100ppm) over a wide temperature range (-55°C
to +125°C). These oscillators are also capable of withstanding
significantly higher shock than a standard tuning fork design.
SM1 Gold Plated (RoHS)
SM5 Solder Dipped (RoHS)
FEATURES:
Ultra low current (typical 15μA)
Fast start up (typical 15ms)
Tight tolerance
High shock resistance
Low ageing
CMOS output
Optional Output Enable/Disable with Tri-State
Low EMI emission
Hermetically sealed ceramic package
Full military testing available
APPLICATIONS:
Military, Aerospace & Avionics
Communications
Navigation
GPS
Industrial, Computer & Communications
Miniature clock oscillator
Handheld instrumentation
Transponder/Animal migration
Medical
Test & diagnostic equipment
Handheld devices
Please note that all data is only valid at 25°C unless otherwise
stated.
Outline (mm) SM1 = Gold Plated (RoHS)
Frequency Parameters
32.768kHz
Frequency
±25.00ppm
Frequency Tolerance
Tolerance Condition
@ 25°C
±10.00ppm to ±100.00ppm
Frequency Stability
Ageing
±5ppm max in 1st year
Frequency Stability does not include Frequency Tolerance @
25°C
All parameters are measured at ambient temperature with a
10MΩ, 15pF load
Note: Other Frequency Tolerances and Stabilities are available
- please contact an IQD Sales Office
Electrical Parameters
3.3V ±10%
Supply Voltage
Supply Current (typical): 15μA
Supply Voltage (absolute maximum rating): -0.3V to 5.0V
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
-55 to 125°C
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 28 Apr 16 15:23 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 1 of 3
Crystal Clock Oscillator Specification
CXOXULP 3.3V
Output Details
Output Compatability
CMOS
Drive Capability
15pF
Output Level High Voh: 90%Vs min
Output Level Low Vol: 10%Vs max
Rise Time (10%-90%): 85ns typ, 160ns max
Fall Time (90%-10%): 45ns typ, 100ns max
Output Control
Start Up Time: 15ms typ
Environmental Parameters
Shock: 5000G, 0.3ms, 1/2 sine
(Note: Higher Shock versions are available - please contact an
IQD Sales Office)
Vibration: MIL-STD-202G, Method 204D, Condition D: 20G,
10Hz-2000Hz swept sine
(Note: Random Vibration test is also available - please contact
an IQD Sales Office)
Storage Temperature Range: –55 to 125°C
Manufacturing Details
Solder Process Temperature: 260°C max for 20sec max
Ordering Information
Frequency*
Model*
Termination Variant*
Output
Frequency Tolerance (@ 25°C)*
Frequency Stability*
Operating Temperature Range*
Pad 1 Function*
(minimum required*)
Termination Variants:
SM1 = Gold Plated
SM5 = Solder Dipped
(Note: Non-RoHS compliant terminations also available please contact an IQD Sales Office)
Pad 1 Function Options:
EN = Enable/Disable
NC = No connection
Example
32.768kHz CXOXULP 3.3V SM1
CMOS ±25ppm ±100ppm –40 to 85C NC
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Optional
Compliant
Not Applicable
Packaging Details
Pack Style: Tray
Pack Size: 1
Supplied on a tray
Pack Style: Reel
Pack Size: 1,000
Tape & reel in accordance with EIA-481-D
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 28 Apr 16 15:24 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 2 of 3
Crystal Clock Oscillator Specification
CXOXULP 3.3V
Electrical Specification - maximum limiting values 3.30V ±10%
Frequency
Temperature Range
°C
ppm
mA
ns
%
32.768000kHz
-55 to 125
±50.00
-
-
45/55%
-40 to 85
±20.00
-
-
45/55%
-10 to 70
±10.00
-
-
45/55%
Stability
(Min)
Current
Draw
Rise and Fall
Time
Duty Cycle
This document was correct at the time of printing; please contact your local sales office for the latest version.
Click to view latest version on our website.
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 28 Apr 16 15:24 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 3 of 3
Similar pages