Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Overview KEMET’s ERO610 series encapsulated radial leaded ceramic disc capacitors are specifically designed for interference-suppression AC line filtering applications. Having internationally recognized safety certifications, these capacitors are well-suited for applications that require keeping potentially disruptive or damaging line transients and EMI out of susceptible equipment. They are also an ideal solution when needing to suppress line disturbances at the source. With a working voltage of 760 VAC in line-to-line (Class X) and 500 VAC in line-to-ground (Class Y) applications, these safety capacitors meet the impulse test criteria outlined in IEC Standard 60384. Meeting subclass X1 and Y1 requirements, these devices are certified to withstand impulses up to 4 KV (X1) and 8 KV (Y1) respectively. These encapsulated devices also meet the flame test requirements outlined in UL Standard 94V-0. Safety Certified Capacitors are classified as either X and/ or Y capacitors. Class X capacitors are primarily used in line-to line (across-the-line) applications. In this application there is no danger of electric shock to humans should the capacitor fail, but could result in a risk of fire. The class Y capacitor is primarily used in line-to-ground (line by-pass) applications. In this application, failure of the capacitor could lead to danger of electric shock. Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Ordering Information ERP610 W 102 M DF0 Ceramic Series Voltage Rating (Safety Subclass Rating) Capacitance Code (pF) Capacitance Tolerance Lead configuration / Packaging Code ERP610 W = X1 760 VAC/Y1 500 VAC Two significant digits and Number of zeroes K = ±10% M = ±20% *See Packaging Options One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 1 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Packaging C-Spec Ordering Options Tables Bulk Packaging1 LEAD LENGTH L LEAD DIAMETER D 0.6 mm 0.8 mm 0.6 mm 0.8 mm 0.6 mm/0.8 mm 0.6 mm 0.8 mm 0.6 mm 0.8 mm 0.6 mm 0.8 mm 0.6 mm 0.8 mm 30 mm - 3 mm Straight leads 10 mm ± 1 mm 6 mm - 1 mm Preformed leads inside crimp 30 mm - 3 mm Preformed leads outside crimp 5 mm ± 1 mm Preformed leads snap-in Inline wire 1 Minimum 2.8 mm Minimum 3.5 mm Minimum 2.8 mm + 1.5 mm Minimum 3.0 mm + 2.0 mm LEAD SPACING F 10 mm DF0 DJ0 DD0 DH0 DB0 TE0 TF0 YE0 YF0 12.5 mm EF0 EJ0 ED0 EH0 EB0 EFG EJG TG0 TH0 QG0 QH0 YG0 YH0 5 mm and 7 mm lead spacing options are not available for ERP610 Series. Reel Packaging Component Pitch 25.4 mm1 TAPING F Lead spacing F 10 mm Body diameter D 1 12.5 mm All diameters Straight leads H = 16.5 mm H = 18.0 mm H = 20.0 mm DRT DRU DRY ERT ERU ERY Preformed leads inside crimp H0 = 16.0 mm – ERZ Preformed leads outside crimp H0 = 16.0 mm TDR TER Inline wire H0 = 16.0 mm YRD YRE 5 mm and 7 mm lead spacing options are not available for ERP610 Series. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 2 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Benefits • • • • • • • • • • • Safety Standard Recognized (IEC 60384-14) Reliable operation up to 125°C Class X1/Y1 10 mm and 12.5 mm lead spacing RoHS compliant Capacitance offerings ranging from 33 pF up to 4.7 nF Available capacitance tolerances of ±10% and ±20% High reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns Encapsulation meets flammability standard UL 94V-0 Applications Typical applications include line-to-Line (Class X) filtering, line to-ground (Class Y) filtering, antenna coupling, primary and secondary coupling (switching power supplies) and line disturbances suppression (motors and motor controls, relays, switching power supplies and invertors). Approval Standard and Certification Number Safety Standard Specification Certificate Number VDE EN 132400 40001993, 40001996 UL CAN/CSA UL 60384–14 and E60384–14 E356389 These devices are VDE/ENEC recognized for antenna coupling and AC line-to-line (Class X) and line-to-ground (Class Y) applications per IEC60384–14. Environmental Compliance These devices are RoHS Compliant. They meet all requirements set forth by both EU and China RoHS directives. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 3 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Lead Configurations Straight Leads Фd L F e 5 0.6 or 0.8 30 - 3 or 10 ± 1 7.5 10 3.0 mm Maximum Inside Kink 12.5 Фd F A L Snap-In Leads Фd F L H P1 P2 A 0.6 7.5 / 10 / 12.5 0.8 7.5 / 10 / 12.5 3.5 mm 2.8 mm Minimum Minimum 2.6 3.3 1.25 1.65 1.65 1.95 D - 8: 6.0 ± 1.5 D > 8: 7.0 ± 1.5 Outside Kink 0.6 or 0.8 7.5 10 12.5 4.0 ± 1.5 5.0 ± 1.5 6.0 ± 1.5 3.0 mm Minimum Tolerance: 1.0 mm absolute Фd 0.6 0.6 or 0.8 F 5.0 7.5 7.5 10.0 12.5 A 5.0 5.0 6.0 6.0 6.0 Vertical Crimp F 7.5 10 12.5 D 0.6 0.8 0.8 4.5 Maximum 2.8 Minimum 1.5 absolute 6.0 Maximum 3.0 Minimum 2.0 absolute 6.0 Maximum 3.0 Minimum 2.0 absolute A L © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 4 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) General Specifications/Performance Characteristics Dielectric/Temperature Characteristic U2J Y5S Operating Temperature Range: Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC): Y5T Y5U +22%/−33% 22%/−56% −40°C to +125°C −750 ±120 ppm/ºC ±22% Component test: 4,000 VAC, 50 Hz, 2 seconds As repeated test admissible only once with 4,000 VAC, 50 Hz, 60 seconds Random sampling test (destructive test): 4,000 VAC, 50 Hz, 60 seconds Test Voltage Between Terminals Dielectric Strength of Body Insulation 4,000 VAC, 50 Hz,60 seconds (destructive test) Dissipation Factor (tanδ) at +25ºC1 0.50% 1 2.50% 10,000 MΩ Minimum (500 VDC applied for 60±5 seconds at 25°C) Insulation Resistance (IR) Limit at +25°C *C = Nominal capacitance Capacitance and Dissipation Factor (DF) measured under the following conditions: U2J: 1 MHz ± 100 kHz and 1.0 ±0.2 Vrms Y5S, Y5T and Y5U: 1 kHz ± 50 Hz and 1.0 ±0.2 Vrms Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." 1 Table 1 – Product Ordering Codes and Ratings Dielectric/ Temp. Char. U2J Y5S Y5T Y5U Dimensions (mm) KEMET Part Number Capacitance ERP610W330 ERP610W470 ERP610W680 ERP610W101 ERP610W151 ERP610W221 ERP610W331 ERP610W471 ERP610W681 ERP610W102 ERP610W152 ERP610W222 ERP610W272 ERP610W332 ERP610W392 ERP610W472 33 pF 47 pF 68 pF 100 pF 150 pF 220 pF 330 pF 470 pF 680 pF 1000 pF 1500 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF ±10% ±20% Capacitance Capacitance Tolerance KEMET Part Number Capacitance Tolerance Body Diameter (Maximum) 8.0 9.0 10.0 12.0 13.0 Body Thickness (Maximum) Lead Spacing Lead Diameter Bulk Packaging Ammo Packaging 6.0 0.6 0.8 10 12.5 Lead Diameter Lead Spacing 5.0 15.0 17.0 Body Diameter (Maximum) Body Thickness (Maximum) (1) To properly complete ordering code, enter the three-digit alphanumeric "Packaging Code." See "Dimensions" section of this document, page 2, for available options. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 5 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 6 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Soldering and Mounting Information Soldering Specifications Soldering Temperature 235°C ± 5°C Resistance to Soldering Heat 260°C ± 5°C Solder Duration 2 seconds ± 0.5 seconds 10 seconds ± 1.0 seconds Distance from component body ≥ 2 mm ≥ 5 mm CSA (cUL recognition) C 22.2 No. 1-M90 (Ur=250 VAC) 216038 Solderability Soldering test for capacitors with wire leads: (according to IEC 60068-2-20, solder bath method) Sodering Recommendations When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may result in thermal shocks that can crack the ceramic element. Cleaning Recommendations The components should be cleaned immediately following the soldering operation with vapor degreasers. Marking Front EVOX RIFA Trademark1 IEC 60384-14 Marking Capacitor Class and Rated Voltage Series Name Back Approval Markings Capacitance Tolerance Code (1 Character) EVOX RIFA Trademark1 Rated Capacitance (3 Characters) Rated Capacitance (3 Characters) 1 Series Name Capacitor Class and Rated Voltage Capacitance Tolerance Code (1 Character) EVOX RIFA and all associated products were acuired by KEMET in 2007. The EVOX RIFA trademark is still used on the capacitor marking. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 7 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Figure 1 - Ammo Pack Taping Format TAPING P/T/U COMPONENT PITCH 0.5 inch LEAD SPACING 5.0 mm TAPING P/T/U COMPONENT PITCH 0.5 inch LEAD SPACING 7.5 mm TAPING F COMPONENT PITCH 1.0 inch LEAD SPACING 5.0 mm, 7.5 mm, 10.0 mm, and 12.5 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com . C1085_ERP610 • 9/13/2016 8 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Table 3 – Ammo Pack Taping Specifications Lead Style Item TAPING P TAPING T Symbol TAPING U TAPING F Dimensions(mm) Pitch of component P 12.7±1 25.4±1 Pitch of sprocket hole P0 12.7±0.3 12.7±0.3 Distance, hole to lead P1 3.85±0.7 (0.5F) ±0.7 Distance, hole to center of component P2 6.35±1.3 12.7±1.3 F 5.0/7.5+0.8/−0.2 5/7.5/10/12.5±0.8 Average deviation across tape ∆h ±2.0 Maximum ±3.0 Maximum Average deviation in direction of reeling ∆p ±1.3 Maximum ±1.3 Maximum Carrier tape width W 18.0+1/−0.5 18.0+1/−0.5 Hold-down tape width W0 6 6 Position of sprocket hole W1 9.0+0.75/−0.5 9.0+0.75/−0.5 Distance of hold-down tape W2 3.0 Maximum 3.0 Maximum Lead spacing Distance between the abscissa and the bottom place of the component body (straight leads) H Distance between the abscissa and the bottom place of the component body (kinked leads) H0 16.0±0.5 16.0±0.5 L 11.0 Maximum 11.0 Maximum D0 4.0±0.2 4.0±0.2 t 0.9 Maximum 0.9 Maximum Length of cut leads Diameter of sprocket hole Total tape thickness 16.5±0.5 18.0+2/−0 20±1 16.5±0.5 18.0+2/−0 20.0±1 Prefromed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information" sections of this document for further details. 2 Also referred to as "lead length" in this document. 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 9 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1085_ERP610 • 9/13/2016 10