BAS16D www.vishay.com Vishay Semiconductors Small Signal Fast Switching Diode FEATURES • Silicon epitaxial planar diode • Fast switching diode • AEC-Q101 qualified • Base P/N-E3 - RoHS-compliant, commercial grade • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: SOD-123 Weight: approx. 10.3 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART INTERNAL CONSTRUCTION TYPE MARKING REMARKS Single diode A6 Tape and reel SYMBOL VALUE UNIT VR 75 V VRRM 100 V IF 250 mA t = 1 μs IFSM 2 A t = 1 ms IFSM 1 A t=1s IFSM 0.5 A Ptot 350 mW SYMBOL VALUE UNIT RthJA 375 K/W Tj 150 °C Storage temperature range (1) Tstg - 65 to + 150 °C Operating temperature range Top - 55 to + 150 °C BAS16D ORDERING CODE BAS16D-E3-08 or BAS16D-E3-18 BAS16D-HE3-08 or BAS16D-HE3-18 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Repetitive peak reverse voltage Forward current (continuous) Non-repetitive peak forward current Power dissipation (1) THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) Maximum junction temperature Note (1) Valid provided electrodes are kept at ambient temperature Rev. 1.4, 13-May-13 Document Number: 85723 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS16D www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MAX. UNIT IF = 1 mA VF 0.715 V IF = 10 mA VF 0.855 V IF = 50 mA VF 1 V Forward voltage TYP. IF = 150 mA VF 1.25 V VR = 25 V, Tj = 150 °C IR 30 μA Leakage current VR = 75 V IR 1 μA VR = 75 V, Tj = 150 °C IR 50 μA VR = 0; f = 1 MHz CD 2 pF IF = 10 mA, IR = 10 mA, iR = 1 mA, RL = 100 trr 6 ns Diode capacitance Reverse recovery time MIN. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) mW 500 103 Tj = 100 °C 102 400 Ptot IF (mA) Tj = 25 °C 10 300 1 200 10- 1 100 10- 2 0 0 1 2 VF (V) 18105 0 100 200 °C Tamb 18186 Fig. 1 - Forward Characteristics Fig. 3 - Admissible Power Dissipation vs. Ambient Temperature 104 Tj = 25 °C 5 10 Tj = 25 °C 1.1 f = 1 kHz 2 f = 1 MHz 3 1.0 CD (VR) 2 102 5 CD (0 V) Rf (Ω) 5 0.9 0.8 2 10 5 0.7 2 10-2 17438 10-1 1 10 Fig. 2 - Dynamic Forward Resistance vs. Forward Current Rev. 1.4, 13-May-13 0 102 IF (mA) 17440 2 4 6 8 10 VR (V) Fig. 4 - Relative Capacitance vs. Reverse Voltage Document Number: 85723 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS16D www.vishay.com Vishay Semiconductors 104 5 2 103 IR (nA) 5 2 102 5 2 10 5 VR = 20 V 2 1 0 100 17441 200 Tj (°C) Fig. 5 - Leakage Current vs. Junction Temperature A 100 IFRM I 5 4 3 2 V = tp/T IFRM V=0 10 T = 1/fp tp t 0.1 5 4 3 2 T 0.2 1 0.5 5 4 3 2 0.1 18106 10-5 2 5 10-4 2 5 10-3 2 5 10-2 2 5 10-1 2 5 1 2 5 10 s tp Fig. 6 - Admissible Repetitive Peak Forward Current vs. Pulse Duration Rev. 1.4, 13-May-13 Document Number: 85723 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS16D www.vishay.com Vishay Semiconductors 0.10 (0.004) 0.15 (0.006) 8° 0.45 (0.018) 0.25 (0.010) 0° to 0.2 (0.008) 1 (0.039) 1.35 (0.053) 0.1 (0.004) max. PACKAGE DIMENSIONS in millimeters (inches): SOD-123 0.5 (0.020) ref. Cathode bar Mounting Pad Layout 2.85 (0.112) 2.55 (0.100) 0.85 (0.033) 2.5 (0.098) 0.85 (0.033) 3.55 (0.140) 1.7 (0.067) 3.85 (0.152) 1.40 (0.055) 0.45 (0.018) 0.65 (0.026) 0.85 (0.033) Rev. 4 - Date: 24. Sep. 2009 Document no.: S8-V-3910.01-001 (4) 17432 Rev. 1.4, 13-May-13 Document Number: 85723 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000