precision metal film resistor SIP networks EU features • • • • • • Custom design network Ultra-precision performance for precision analog circuits Tolerance to ±0.1%, matching to 0.05% T.C.R. to ±25ppm/°C, tracking to 2ppm/°C Marking: Black body color with laser marking Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. dimensions and construction L D Type L (max.) MRPL03 h MRPA03 H .335 (8.5) Dimensions inches (mm) D (max.) P H .098 (2.5) .100±.008 (2.54±0.2) B h (max.) .256 (6.5) .118±.02 (3.0±0.5) .335 (8.5) .01±.02 (0.25±0.5) P P x No. of Pins ordering information New Part # MRP L03 Type Size L03 A03 E A D 103/103 T.C.R. (ppm/˚C) E: ±25 C: ±50 T.C.R. Tracking A: 2 Y: 5 T: 10 Termination Material D: SnAgCu Resistance Value 3 significant figures/ 3 significant figures Tolerance B: ±0.1% C: ±0.25% D: ±0.5% F: ±1.0% custom circuit ordering information New Part # MRP Type A Tolerance Ratio E: 0.025% A: 0.05% B: 0.1% C: 0.25% D: 0.5% KxxxxD Custom Code Factory will assign applications and ratings Ratings Type Power Rating (mW) Element Package Absolute T.C.R. T.C.R. Tracking Resistance Resistance Range* Tolerance Maximum Working Voltage Maximum Overload Voltage Rated Operating Ambient Temperature Temperature Range A: 2 B: ±0.1% (R1/R2≤10) C: ±0.25% -55°C to 100 200 50-100kΩ D: ±0.5% 100V 200V +70°C Y: 5 +125°C MRPA03 T: 10 F: ±1% * Resistance combination for R1, R2 is standardized to 200/20k, 1k/1k, 1k/2k, 1k/4k, 1k/9k, 1k/10k, 1k/20k, 10k/10k, 10k/100k, 50k/50k, 100k/100k MRPL03 E: ±25 C: ±50 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/21/11 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 97 resistors MRP resistors MRP precision metal film resistor SIP networks applications and ratings (continued) Resistance Range Resistance Ratio Tolerance Absolute Resistance Tolerance E: 0.025% A: 0.025% B: 0.1% C: 0.25% D: 0.5% B: ±0.1% 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ ––– ––– C: ±0.25% 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ ––– D: ±0.5% 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ F: ±1% 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 100 max. 100 max. 150 max. 150 max. 150 max. R1/R2 Relative Resistance Ratio standard circuit schematic R1 R2 custom circuit schematics X W V Z environmental applications Derating Curve 100 (Examples only. Contact factory for other custom layout requests.) % Rated Power 80 60 40 20 0 -60 -40 -55 -20 0 80 70 Ambient Temperature (°C) 20 40 60 100 120 140 125 Performance Characteristics Parameter Resistance T.C.R. Overload (Short Time) Resistance to Soldering Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C Insulation Resistance Requirement Within specified tolerance Within specified T.C.R. ±0.05% ±0.1% ±0.1% ±0.1% ±0.1% No abnormality in outer coating and markings 10,000MΩ or above Withstanding Voltage ±0.5% Resistance to Solvents Test Method 25°C +25°C/+65°C Rated voltage x 2.5 or max. overload voltage, whichever is lower, 5 seconds +350°C ± 10°C, 3.5 ± 0.5 seconds -55 +0/-5°C (30 min.), +125 +3/-0°C (30 min.) 5 cycles 40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Soaking in 2-propanol of +20°C ~ +25°C for 180 seconds ± 10 seconds 500V (d.c.) for 1 minute between terminals and coatings 500V (a.c.) for 1 minute between terminals and coatings Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 98 12/28/10 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com