Surface Mount Coaxial-Ceramic Resonator Filters and Multiplexers 50Ω DC to 6 GHz The Big Deal • • • • • • Low insertion loss with excellent power handling Passbands up to 6 GHz Fractional bandwidth from 3 to 25% Low profile designs with min. height of 0.120” Excellent temperature stability Rugged construction to handle demanding environmental conditions Product Overview Mini-Circuits’ Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer designs can be constructed using this technology. Low insertion loss combined with excellent power handling makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction can achieve stopband width greater than 3x the center frequency All our coaxial-ceramic resonator filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Custom integrated assembly with LNA in greatly simplifying system integration. They can be realized in small form factors with high-quality, precise machining for applications where size is critical. Excellent repeatability across units is achieved through precise tuning and process control. Key Features Feature Advantages Low insertion loss Low signal loss results in better SNR in signal chain Fast roll-off Higher selectivity results in better adjacent channel rejection and dynamic range Wide stop band Wide spur-free stopband results in better receiver sensitivity Excellent power handling Well suited for transmitter applications Rugged Construction These filter assemblies have been qualified over a wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles Small Size Very well suited for high performance applications where size is a constraint. Temperature stability Very minimal change in electrical performance across temperature makes these filters suitable for a wide range of operating conditions. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Surface Mount Bandpass Filter CBP-1183A+ 50Ω 1165 to 1201 MHz CASE STYLE: KV1514 Features • Fast roll-off • Low passband IL • Miniature shielded package Electrical Specifications at 25°C Parameter Pass Band Applications Stop Band, Lower • Aviation / Aeronautical • Test and measurement Stop Band, Upper Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit - 1165-1201 1165-1201 DC-1130 DC-1130 1235-2800 1235-2800 20.0 1183 3.0 1.7 30.0 20.0 30.0 20.0 4.0 2.3 MHz dB :1 dB :1 dB :1 F1-F2 F1-F2 DC-F3 DC-F3 F4-F5 F4-F5 20.0 - - Maximum Ratings Functional Schematic RF IN Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 10 W max. Permanent damage may occur if any of these limits are exceeded. RF OUT Typical Performance Data at 25°C Frequency (MHz) Typical Frequency Response FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) DC Insertion Loss (dB) VSWR (:1) Frequency (MHz) 1 107.14 348.50 1165 25.03 500 92.11 308.94 1167 23.89 1000 74.51 90.30 1169 23.01 1130 35.95 25.46 1171 22.31 1135 30.43 20.74 1173 21.73 1143 20.00 12.31 1175 21.29 1148 12.41 6.61 1177 20.92 1156 3.54 1.32 1179 20.66 1165 2.25 1.11 1181 20.46 1183 1.87 1.15 1183 20.39 1201 2.28 1.17 1185 20.39 1206 3.22 1.51 1187 20.50 1214 10.57 7.50 1189 20.69 1222 19.95 20.16 1191 20.97 1235 31.74 40.92 1193 21.37 1500 71.39 82.37 1195 21.88 1750 66.55 77.22 1197 22.57 2000 63.26 75.80 1199 23.63 2500 54.97 93.48 1200 24.31 2800 53.05 95.37 1201 25.15 CBP-1183A+ INSERTION LOSS (Full band) CBP-1183A+ INSERTION LOSS (Pass band) 0 INSERTION LOSS (dB) The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications INSERTION LOSS (dB) 0 +RoHS Compliant Group Delay (nsec) 20 40 60 80 100 0 560 1120 1680 FREQUENCY (MHz) 2240 5 10 15 20 25 30 1130 2800 1.50 2.00 2.50 1165 1152 1201 1218 1240 CBP-1183A+ GROUP DELAY CBP-1183A+ VSWR 26 GROUP DELAY (ns) 1000 VSWR 100 1.40 10 1.20 1.00 1165 1 1183 1174 1196 FREQUENCY (MHz) 0 560 1120 1680 FREQUENCY (MHz) 1183 1201 2240 2800 25 24 23 22 21 20 1165 1169.5 1174 1178.5 1183 1187.5 1192 1196.5 1201 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV.OR M163068 CBP-1183A+ EDU2163/1 URJ 171030 Page 2 of 3 CBP-1183A+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT GROUND 10 15 16 2,3,4,5,6,7,8,9,11,12,13,14,15,16 13 14 12 11 1 10 2 9 METALLIZATION A 3 Demo Board MCL P/N: TB-578+ Suggested PCB Layout (PL-331) 4 5 6 7 SOLDER RESIST 8 C B PCB Land Pattern K D E 3 4 5 6 7 M H 8 F D L 9 2 J N N Q F 1 T V 10 16 15 14 13 12 G 11 R U P S Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .550 13.97 B 1.040 26.24 C .225 5.72 D .160 4.06 E .120 3.05 F .077 1.96 G .070 1.78 H .160 4.06 J .590 14.99 M .140 3.56 N .230 5.84 P .180 4.57 Q .195 4.95 R .115 2.92 S .780 19.81 T .290 7.37 U .110 2.79 V .100 2.54 K 1.080 27.43 L .100 2.54 Wt. grams 4.8 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3