Online data sheet MPS-192TSTP0 MPS-T POSITION SENSORS MPS-192TSTP0 | MPS-T POSITION SENSORS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. MPS-192TSTP0 1047728 Other models and accessories www.sick.com/MPS-T Detailed technical data Features Cylinder type T-slot Cylinder types with adapter Round body cylinder Profile cylinders and tie-rod cylinders Dovetail groove cylinder SMC rail CDQ2 SMC rail ECDQ2 SMC cylinders with C-slot Measuring range 192 mm 1) Housing length 205 mm Output function Analog Electrical wiring DC 4-wire Analog output (voltage) 0 V ... 10 V 2) Analog output (current) 4 mA ... 20 mA 2) Teach-in ✔ Enclosure rating IP67 3) 1) 2) 3) , ± 1 mm. The sensor only activates the wired output. According to EN 60529. Mechanics/electronics Supply voltage 15 V DC ... 30 V DC 1) Power consumption ≤ 22 mA 2) 1) 2) 3) 4) 5) 6) 7) 8) 9) Reverse-polarity protected, operation in short-circuit protected network: max. 8 A. Without load. Power Output, at 24 V. Voltage output. FSR: Full Scale Range; max. measuring range. At 25 ° C, linearity error (maximum deviation) depending on response curve and minimal deviation function. At 25 ° C, repeatability magnet movement in one direction. Only in standard mode, not in IO-Link mode. The analog measured value can deviate under transient conditions. 10) 2 Do not bend below 0 °C. MAGNETIC CYLINDER SENSORS | SICK Online data sheet | 2017-05-04 16:20:10 Subject to change without notice MPS-192TSTP0 | MPS-T POSITION SENSORS Max. load resistance 500 Ω 3) Min. load resistance ≥ 2 kΩ 4) Protection class III Time delay before availability 1.5 s Required magnetic field sensitivity, typ. 3 mT Resolution, typ. 0.03 % FSR (max. ≥ 0.05 mm) 5) Linearity error, typ. 0.3 mm 6) Repeat accuracy, typ. 0.06 % FSR (≥ 0.1 mm) 7) Sampling rate, typ. 1 ms 8) Status indicator LED ✔ Reverse polarity protection ✔ Short-circuit protection ✔ Ambient operating temperature –20 °C ... +70 °C Shock and vibration resistance 30 g, 11 ms / 10 ... 55 Hz, 1 mm EMC According to EN 60947-5-2 9) Housing material Plastic Connection type Cable with M8 male connector, 4-pin, 0.3 m 10) Cable material PUR Conductor cross-section 0.08 mm² UL File No. NRKH.E181493 1) 2) 3) 4) 5) 6) 7) 8) 9) Reverse-polarity protected, operation in short-circuit protected network: max. 8 A. Without load. Power Output, at 24 V. Voltage output. FSR: Full Scale Range; max. measuring range. At 25 ° C, linearity error (maximum deviation) depending on response curve and minimal deviation function. At 25 ° C, repeatability magnet movement in one direction. Only in standard mode, not in IO-Link mode. The analog measured value can deviate under transient conditions. 10) Do not bend below 0 °C. Classifications ECl@ss 5.0 27270104 ECl@ss 5.1.4 27270104 ECl@ss 6.0 27270104 ECl@ss 6.2 27270104 ECl@ss 7.0 27270104 ECl@ss 8.0 27270104 ECl@ss 8.1 27270104 ECl@ss 9.0 27270104 ETIM 5.0 EC002544 ETIM 6.0 EC002544 UNSPSC 16.0901 39122230 2017-05-04 16:20:10 | Online data sheet Subject to change without notice MAGNETIC CYLINDER SENSORS | SICK 3 MPS-192TSTP0 | MPS-T POSITION SENSORS Connection diagram Cd-034 brn 1 blk 4 wht 2 blu 3 + (L+) Uout Iout - (M) Dimensional drawing (Dimensions in mm (inch)) 37.1 (1.46) 1 2 L3 24.2 (0.95) 3 2 14.2 13.6 (0.54) (0.56) (0.54) (0.23) 6.5 (0.26) Total length (L1) mm (0.32) 13.6 L2 H I J K L M N O P Q R S T Ø 8.1 5.8 L1 (0.10) Teach-in Ø 2.6 A B C D E F MPS-32 Distance Measuring range mounting screws (L2) mm (L3) mm 45 32 40 5.8 MPS-64 77 64 72 (0.23) MPS-96 109 96 104 MPS-128 141 128 136 MPS-160 173 160 168 MPS-192 205 192 200 MPS-224 237 224 232 MPS-256 269 256 264 ① Function indicator ② Fixing screw ③ Teach-in button Recommended accessories Other models and accessories www.sick.com/MPS-T Brief description Type Part no. Mounting bracket for cylinder with dovetail slot, Aluminum, without mounting hardware BEF-KHZ-ST1 2022703 Mounting bracket for integrated profile cylinder/tie-rod cylinder, Zinc diecast, mounting hardware included BEF-KHZ-PT1 2022702 1 piece, Mounting bracket on round body cylinder with piston diameter of 12 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-12 2077681 1 piece, Mounting bracket on round body cylinder with piston diameter of 16 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-16 2077680 1 piece, Mounting bracket on round body cylinder with piston diameter of 20 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-20 2077679 1 piece, Mounting bracket on round body cylinder with piston diameter of 25 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-25 2077678 Brackets for cylinder sensors 4 MAGNETIC CYLINDER SENSORS | SICK Online data sheet | 2017-05-04 16:20:10 Subject to change without notice MPS-192TSTP0 | MPS-T POSITION SENSORS Brief description Type Part no. 1 piece, Mounting bracket on round body cylinder with piston diameter of 32 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-32 2077677 1 piece, Mounting bracket on round body cylinder with piston diameter of 40 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-40 2077676 1 piece, Mounting bracket on round body cylinder with piston diameter of 50 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-50 2077675 1 piece, Mounting bracket on round body cylinder with piston diameter of 63 mm, ambient temperature min 0 °C max 50 °C, Plastic, Aluminum BEF-KHZ-RT-63 2077674 1 piece, Mounting bracket on round body cylinder with piston diameter of 8 mm ... 130 mm, ambient temperature min –30 °C max 80 °C, Stainless steel, Zinc cast BEF-KHZ-RT1-130 2077684 1 piece, Mounting bracket on round body cylinder with piston diameter of 8 mm ... 25 mm, ambient temperature min –30 °C max 80 °C, Stainless steel, Zinc cast BEF-KHZ-RT1-25 2077682 1 piece, Mounting bracket on round body cylinder with piston diameter of 8 mm ... 63 mm, ambient temperature min –30 °C max 80 °C, Stainless steel, Zinc cast BEF-KHZ-RT1-63 2077683 Mounting bracket with T-slot for mounting a MPS on SMC C-slot cylinders. For each MPS a minimum of 2 brackets is recommended., Aluminum BEF-KHZ-CT23 2074119 Mounting bracket for mounting on SMC rails CDQ2 (T-slot), Aluminum, without mounting hardware BEF-KHZ-TT2 2046440 Mounting bracket for mounting on SMC rails ECDQ2 (T-slot), Aluminum, without mounting hardware BEF-KHZ-TT1 2046439 CABLE CLIPS 2059322 LABEL HOLDER 2086019 Head A: female connector, M8, 4-pin, straight Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 2 m DOL-0804-G02MC 6025894 Head A: female connector, M8, 4-pin, straight Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 5 m DOL-0804-G05MC 6025895 Head A: female connector, M8, 4-pin, angled Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 2 m DOL-0804-W02MC 6025897 Head A: female connector, M8, 4-pin, angled Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 5 m DOL-0804-W05MC 6025898 Head A: female connector, M8, 4-pin, straight Head B: Cable: unshielded DOS-0804-G 6009974 Head A: female connector, M8, 4-pin, angled Head B: Cable: unshielded DOS-0804-W 6009975 Head A: male connector, M8, 4-pin, straight Head B: Cable: unshielded STE-0804-G 6037323 Other mounting accessories Cable clips T-slot, 10 pcs./bag 10 pieces, Label Holder, 2.5 mm to 3.5 mm, 10 pcs., TPU Plug connectors and cables 2017-05-04 16:20:10 | Online data sheet Subject to change without notice MAGNETIC CYLINDER SENSORS | SICK 5 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com