Hirose HIF6A-034PA-1.27DSA 1.27mm pitch two-piece connector Datasheet

1.27mm Pitch Two-Piece Connector
HIF6 Series
Connector in combination with the HIF6 series connection type
●HIF3B Series
(MIL-C-83503)
●HIF2 Series
(Board direct mount type)
1
2
●HIF5 Series
(Card edge type)
■Features
1. Product Variation
The connection method is available with the board to
board type and insulation displacement type.
2. Broad applications
HIF2E, HIF3B and HIF5 can be combined one other,
because the 1.27mm pitch flat cable is used.
●RC Series
(Micro ribbon connector)
●FD Series
(D sub-ribbon connector)
3. Applicable Cables
The applicable cable is a (UL2651) AWG #28 flat cable
(7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm)
4. Mis-insertion Preventive Structure
The mis-insertion preventive guide prevents misinsertion.
Photo1 (For further information, refer to catalog page A133.)
■Applications
Computers, peripheral and terminal equipment, PPC, various kinds of electronic equipment, Office Automation machines
■Product Specifications
Rating
Current rating: 0.5A
Operating Temperature Range: -55 to +85 ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2)
Voltage rating: 125V AC Operating Humidity Range: 40 to 80%
Item
Operating Humidity Range: 40 to 70%
Specification
(Note 2)
Condition
1.Insulation Resistance 1000M ohms min.
250V DC
2.Withstanding Voltage No flashover or insulation breakdown.
300V AC/1 minute.
3.Contact Resistance
30m ohms max.
0.1A
4.Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.Humidity (Steady state) Insulation resistance: 1000M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6.Temperature Cycle
(-65ç: 30 minutes→15 to 35ç: 5 minutes max.→
125ç: 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles
No damage, cracks, or parts looseness.
7.Durability (Mating/un-mating) Contact resistance: 30m ohms max.
8.Resistance to Soldering heat No deformation of components affecting performance.
500 cycles
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
A116
■Material
Parts
Material
Finish
Remarks
Black
UL94V-0
Selective gold plating
————
Insulator
PBT
Socket Contact
Copper alloy
Pin header Contact
Brass
■Ordering Information
●Socket and Receptacle
HIF6 A – * D A – 1.27 DSA L
q
w
e
r
t
y
u
i
q Series Name : HIF6
w Blank
: Ribbon cable insulation displacement type
A
: With board mounting hole
B
: Without board mounting hole
e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
r
D
: Socket or receptacle
t
A
: Selective gold plated
y Contact pitch : 1.27mm
u Contact type : DS
: Right angle type
DSA : Straight type
R
: Ribbon cable ID type
i L : Board pre-fixed lock pin
●Pin Header
HIF6 A – * P A – 1.27 DSA L
q
w
e
r
t
y
u
i
q Series Name : HIF6
w Blank
: With lock
A
: With board mounting hole
B
: Without board mounting hole
e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
r
P
: Pin header
t
A
: Selective gold plated
y Contact pitch : 1.27mm
u Contact style : DS
DSA
: Right angle type
: Straight type
i L : Board pre-fixed lock pin
A117
BFunction Chart
Pin Header
Right Angle
Type with lock
Socket or Receptacle Side
Two pieces of 1.27mm
pitch cable used
a2.54 pitch connector
(MIL-C-83503)
HIF2B series
HIF3B series
HIF5 series
Straight Type
with lock
Ribbon cable FD
(D sub) connector
Ribbon cable RC30
(Micro ribbon) connector
Right Angle
Type with
mounting hole
Straight Type
with mounting
hole
Right Angle
Type with
mounting hole
Straight Type
with mounting
hole
Right Angle
Type without
mounting hole
Right Angle
Type without
mounting hole
Straight Type
without
mounting hole
Straight Type
without
mounting hole
A118
■Cable ID Connector
Unit: mm
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
HIF6-020D-1.27R
630-0001-4
20
18.55
11.43
13.95
16.35
HIF6-026D-1.27R
630-0002-7
26
22.36
15.24
17.76
20.16
HIF6-032D-1.27R
630-0003-0
32
26.17
19.05
21.57
23.97
HIF6-034D-1.27R
630-0004-2
34
27.44
20.32
22.84
25.24
HIF6-040D-1.27R
630-0005-5
40
31.25
24.13
26.65
29.05
HIF6-050D-1.27R
630-0006-8
50
37.60
30.48
33.00
35.40
HIF6-052D-1.27R
630-0007-0
52
38.87
31.75
34.27
36.67
HIF6-060D-1.27R
630-0008-3
60
43.95
36.83
39.35
41.75
HIF6-068D-1.27R
630-0009-6
68
49.03
41.91
44.43
46.83
HIF6-080D-1.27R
630-0010-5
80
56.65
49.53
52.05
54.45
HIF6-100D-1.27R
630-0011-8
100
69.35
62.23
64.75
67.15
A119
■Pin Header Right Angle Type with lock
Unit: mm
n=
Number of Contacts
2
Note : Size F indicates the state where the lock is open.
BPCB mounting pattern
● Indicate
mark position.
Mating Side
Mating Side
Unit: mm
A120
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
HIF6-020PA-1.27DS
630-0051-2
20
30.95
11.43
24.55
18.75
21.59
43.55
HIF6-026PA-1.27DS
630-0052-5
26
34.76
15.24
28.36
22.56
25.40
47.36
HIF6-032PA-1.27DS
630-0053-8
32
38.57
19.05
32.17
26.37
29.21
51.17
HIF6-034PA-1.27DS
630-0054-0
34
39.84
20.32
33.44
27.64
30.48
52.44
HIF6-040PA-1.27DS
630-0055-3
40
43.65
24.13
37.25
31.45
34.29
56.25
HIF6-050PA-1.27DS
630-0056-6
50
50.00
30.48
43.60
37.80
40.64
62.60
HIF6-052PA-1.27DS
630-0057-9
52
51.27
31.75
44.87
39.07
41.91
63.87
HIF6-060PA-1.27DS
630-0058-1
60
56.35
36.83
49.95
44.15
46.99
68.95
HIF6-068PA-1.27DS
630-0059-4
68
61.43
41.91
55.03
49.23
52.07
74.03
HIF6-080PA-1.27DS
630-0060-3
80
69.05
49.53
62.65
56.85
59.69
81.65
HIF6-100PA-1.27DS
630-0061-6
100
81.75
62.23
75.35
69.55
72.39
94.35
■Pin Header Straight Type with lock
Unit: mm
Number of Contacts
n=
2
BPCB mounting pattern
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
● Indicate
mark position.
(26, 34, 50 contacts)
Note : Size F indicates a state where the lock is open.
(26, 34, 50 contacts)
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
G
HIF6-020PA-1.27DSA
630-0101-9
20
30.95
11.43
24.55
18.75
14.95
21.59
43.55
HIF6-026PA-1.27DSA
630-0102-1
26
34.76
15.24
28.36
22.56
18.76
25.40
47.36
HIF6-032PA-1.27DSA
630-0103-4
32
38.57
19.05
32.17
26.37
22.57
29.21
51.17
HIF6-034PA-1.27DSA
630-0104-7
34
39.84
20.32
33.44
27.64
23.84
30.48
52.44
HIF6-040PA-1.27DSA
630-0105-0
40
43.65
24.13
37.25
31.45
27.65
34.29
56.25
HIF6-050PA-1.27DSA
630-0106-2
50
50.00
30.48
43.60
37.80
34.00
40.64
62.60
HIF6-052PA-1.27DSA
630-0107-5
52
51.27
31.75
44.87
39.07
35.27
41.91
63.87
HIF6-060PA-1.27DSA
630-0108-8
60
56.35
36.83
49.95
44.15
40.35
46.99
68.95
HIF6-068PA-1.27DSA
630-0109-0
68
61.43
41.91
55.03
49.23
45.43
52.07
74.03
HIF6-080PA-1.27DSA
630-0110-0
80
69.05
49.53
62.65
56.85
53.05
59.69
81.65
HIF6-100PA-1.27DSA
630-0111-2
100
81.75
62.23
75.35
69.55
65.75
72.39
94.35
A121
■Receptacle Right Angle Type with Mounting hole
Unit: mm
n=
Number of Contacts
2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80 contacts)
Mating Side
Mounting hole center line
(26, 34, 50 contacts)
Unit: mm
*Lock pin type is
also available.
A122
Part Number
CL No.
Number of Contacts
A
B
C
D
E
HIF6B-20DA-1.27DS
631-0051-9
20
30.95
20.95
11.43
26.67
18.55
HIF6B-26DA-1.27DS
631-0052-1
26
34.76
24.76
15.24
30.48
22.36
HIF6B-32DA-1.27DS
631-0053-4
32
38.57
28.57
19.05
34.29
26.17
HIF6B-34DA-1.27DS
631-0054-7
34
39.84
29.84
20.32
35.56
27.44
HIF6B-40DA-1.27DS
631-0055-0
40
43.65
33.65
24.13
39.37
31.25
HIF6B-50DA-1.27DS
631-0056-2
50
50.00
40.00
30.48
45.72
37.60
HIF6B-52DA-1.27DS
631-0057-5
52
51.27
41.27
31.75
46.99
38.87
HIF6B-60DA-1.27DS
631-0058-8
60
56.35
46.35
36.83
52.07
43.95
HIF6B-68DA-1.27DS
631-0059-0
68
61.43
51.43
41.91
57.15
49.03
HIF6B-80DA-1.27DS
631-0060-0
80
69.05
59.05
49.53
64.77
56.65
■Receptacle Right Angle Type Without Mounting hole
Unit: mm
n=
Number of Contacts
2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80 contacts)
Mating Side
(26, 34, 50 contacts)
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
HIF6A-20DA-1.27DS
631-0001-0
20
20.95
11.43
18.55
HIF6A-26DA-1.27DS
631-0002-3
26
24.76
15.24
22.36
HIF6A-32DA-1.27DS
631-0003-6
32
28.57
19.05
26.17
HIF6A-34DA-1.27DS
631-0004-9
34
29.84
20.32
27.44
HIF6A-40DA-1.27DS
631-0005-1
40
33.65
24.13
31.25
HIF6A-50DA-1.27DS
631-0006-4
50
40.00
30.48
37.60
HIF6A-52DA-1.27DS
631-0007-7
52
41.27
31.75
38.87
HIF6A-60DA-1.27DS
631-0008-0
60
46.35
36.83
43.95
HIF6A-68DA-1.27DS
631-0009-2
68
51.43
41.91
49.03
HIF6A-80DA-1.27DS
631-0010-1
80
59.05
49.53
56.65
A123
■Receptacle Straight Type with Mounting hole
Unit: mm
n=
Number of Contacts
2
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BPCB mounting pattern
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
Mounting hole center line
(26, 34, 50 contacts)
Unit: mm
*Lock pin type is
also available.
A124
Part Number
CL No.
Number of Contacts
A
B
C
D
HIF6B-020DA-1.27DSA
631-0151-3
20
30.95
26.67
11.43
18.55
HIF6B-026DA-1.27DSA
631-0152-6
26
34.76
30.48
15.24
22.36
HIF6B-032DA-1.27DSA
631-0153-9
32
38.57
34.29
19.05
26.17
HIF6B-034DA-1.27DSA
631-0154-1
34
39.84
35.56
20.32
27.44
HIF6B-040DA-1.27DSA
631-0155-4
40
43.65
39.37
24.13
31.25
HIF6B-050DA-1.27DSA
631-0156-7
50
50.00
45.72
30.48
37.60
HIF6B-052DA-1.27DSA
631-0157-0
52
51.27
46.99
31.75
38.87
HIF6B-060DA-1.27DSA
631-0158-2
60
56.35
52.07
36.83
43.95
HIF6B-068DA-1.27DSA
631-0159-5
68
61.43
57.15
41.91
49.03
HIF6B-080DA-1.27DSA
631-0160-4
80
69.05
64.77
49.53
56.65
HIF6B-100DA-1.27DSA
631-0161-7
100
81.75
77.47
62.23
69.35
■Receptacle Straight Type without Mounting hole
Unit: mm
n=
Number of Contacts
2
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BPCB mounting pattern
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
(26, 34, 50 contacts)
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
HIF6A-020DA-1.27DSA
631-0101-5
20
20.95
11.43
18.55
HIF6A-026DA-1.27DSA
631-0102-8
26
24.76
15.24
22.36
HIF6A-032DA-1.27DSA
631-0103-0
32
28.57
19.05
26.17
HIF6A-034DA-1.27DSA
631-0104-3
34
29.84
20.32
27.44
HIF6A-040DA-1.27DSA
631-0105-6
40
33.65
24.13
31.25
HIF6A-050DA-1.27DSA
631-0106-9
50
40.00
30.48
37.60
HIF6A-052DA-1.27DSA
631-0107-1
52
41.27
31.75
38.87
HIF6A-060DA-1.27DSA
631-0108-4
60
46.35
36.83
43.95
HIF6A-068DA-1.27DSA
631-0109-7
68
51.43
41.91
49.03
HIF6A-080DA-1.27DSA
631-0110-6
80
59.05
49.53
56.65
HIF6A-100DA-1.27DSA
631-0111-9
100
71.75
62.23
69.35
A125
■Pin Header Right Angle Type with Mounting hole
Unit: mm
n=
Number of Contacts
2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Mating Side
Mounting hole center line
(26, 34, 50 contacts)
Unit: mm
πLock pin type is
also available.
A126
Part Number
CL No.
Number of Contacts
A
B
C
D
E
HIF6B-020PA-1.27DS
631-0251-8
20
30.95
20.95
18.75
11.43
26.67
HIF6B-026PA-1.27DS
631-0252-0
26
34.76
24.76
22.56
15.24
30.48
HIF6B-032PA-1.27DS
631-0253-3
32
38.57
28.57
26.37
19.05
34.29
HIF6B-034PA-1.27DS
631-0254-6
34
39.84
29.84
27.64
20.32
35.56
HIF6B-040PA-1.27DS
631-0255-9
40
43.65
33.65
31.45
24.13
39.37
HIF6B-050PA-1.27DS
631-0256-1
50
50.00
40.00
37.80
30.48
45.72
HIF6B-052PA-1.27DS
631-0257-4
52
51.27
41.27
39.07
31.75
46.99
HIF6B-060PA-1.27DS
631-0258-7
60
56.35
46.35
44.15
36.83
52.07
HIF6B-068PA-1.27DS
631-0259-0
68
61.43
51.43
49.23
41.91
57.15
HIF6B-080PA-1.27DS
631-0260-9
80
69.05
59.05
56.85
49.53
64.77
HIF6B-100PA-1.27DS
631-0261-1
100
81.75
71.75
69.55
62.23
77.47
■Pin Header Right Angle Type Without Mounting hole
Unit: mm
n=
Number of Contacts
2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Mating Side
(26, 34, 50 contacts)
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
HIF6A-020PA-1.27DS
631-0201-0
20
20.95
18.75
11.43
HIF6A-026PA-1.27DS
631-0202-2
26
24.76
22.56
15.24
HIF6A-032PA-1.27DS
631-0203-5
32
28.57
26.37
19.05
HIF6A-034PA-1.27DS
631-0204-8
34
29.84
27.64
20.32
HIF6A-040PA-1.27DS
631-0205-0
40
33.65
31.45
24.13
HIF6A-050PA-1.27DS
631-0206-3
50
40.00
37.80
30.48
HIF6A-052PA-1.27DS
631-0207-6
52
41.27
39.07
31.75
HIF6A-060PA-1.27DS
631-0208-9
60
46.35
44.15
36.83
HIF6A-068PA-1.27DS
631-0209-1
68
51.43
49.23
41.91
HIF6A-080PA-1.27DS
631-0210-0
80
59.05
56.85
49.53
HIF6A-100PA-1.27DS
631-0211-3
100
71.75
69.55
62.23
A127
■Pin Header Straight Type with Mounting hole
Unit: mm
n=
Number of Contacts
2
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BPCB mounting pattern
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
Mounting hole center line
(26, 34, 50 contacts)
Unit: mm
*Lock pin type is
also available.
A128
Part Number
CL No.
Number of Contacts
A
B
C
D
E
HIF6B-020PA-1.27DSA
631-0351-2
20
30.95
26.67
20.95
11.43
18.75
HIF6B-026PA-1.27DSA
631-0352-5
26
34.76
30.48
24.76
15.24
22.56
HIF6B-032PA-1.27DSA
631-0353-8
32
38.57
34.29
28.57
19.05
26.37
HIF6B-034PA-1.27DSA
631-0354-0
34
39.84
35.56
29.84
20.32
27.64
HIF6B-040PA-1.27DSA
631-0355-3
40
43.65
39.37
33.65
24.13
31.45
HIF6B-050PA-1.27DSA
631-0356-6
50
50.00
45.72
40.00
30.48
37.80
HIF6B-052PA-1.27DSA
631-0357-9
52
51.27
46.99
41.27
31.75
39.07
HIF6B-060PA-1.27DSA
631-0358-1
60
56.35
52.07
46.35
36.83
44.15
HIF6B-068PA-1.27DSA
631-0359-4
68
61.43
57.15
51.43
41.91
49.23
HIF6B-080PA-1.27DSA
631-0360-3
80
69.05
64.77
59.05
49.53
56.85
HIF6B-100PA-1.27DSA
631-0361-6
100
81.75
77.47
71.75
62.23
69.55
■Pin Header Straight Type Without Mounting hole
Unit: mm
n=
Number of Contacts
2
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BPCB mounting pattern
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
(26, 34, 50 contacts)
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
HIF6A-020PA-1.27DSA
631-0301-4
20
20.95
11.43
18.75
HIF6A-026PA-1.27DSA
631-0302-7
26
24.76
15.24
22.56
HIF6A-032PA-1.27DSA
631-0303-0
32
28.57
19.05
26.37
HIF6A-034PA-1.27DSA
631-0304-2
34
29.84
20.32
27.64
HIF6A-040PA-1.27DSA
631-0305-5
40
33.65
24.13
31.45
HIF6A-050PA-1.27DSA
631-0306-8
50
40.00
30.48
37.80
HIF6A-052PA-1.27DSA
631-0307-0
52
41.27
31.75
39.07
HIF6A-060PA-1.27DSA
631-0308-3
60
46.35
36.83
44.15
HIF6A-068PA-1.27DSA
631-0309-6
68
51.43
41.91
49.23
HIF6A-080PA-1.27DSA
631-0310-5
80
59.05
49.53
56.85
HIF6A-100PA-1.27DSA
631-0311-8
100
71.75
62.23
69.55
A129
BConnection Circuit
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
n=
Type A, B
Connection of Cable 1
A1
B2
bn
1
······
1
bn
······
B1
······
an
an
······
A2
Connection of Cable 2
An
a1
Bn
b1
Type A, A
Connection of Cable 1
A130
Connection of Cable 2
A2
b2
B2
a2
······
a1
······
B1
······
b1
······
A1
An
bn
Bn
an
Number of Contacts
2
BConnection Circuit
(26, 40, 50 contacts)
n=
Type A, B
Connection of Cable 1
A1
1
B2
bn
bn
1
······
B1
······
an
······
an
2
Connection of Cable 2
······
A2
Number of Contacts
An
a1
Bn
b1
Type A, A
A1
b1
B1
a1
A2
b2
B2
a2
······
······
······
Connection of Cable 2
······
Connection of Cable 1
An
bn
Bn
an
A131
BConnection Jig
●Guide Plate
●Hi-Flex Connection Press
Hi-Flex Connection Press HHP502
CL550 - 0082 - 2
HIF 6 - GPA
CL550 - 0165 - 8
Part Number
CL No.
Pressing Block A-01
550-0133-1
●Cable Cutter
●Instruction Manual for HIF6 Connection Service Method
HIF6 Cable Cutter-FC601
14 Pages
CL550 - 0166 - 0
A132
*Pressing Block
■HIF6 Series: Connection Type Coupled Connector
HIF3B Series (MIL-C-83503)
●Compliant with the MIL standard
●The VA idea is reflected on both pin header and socket.
●Products with pull-out tab are available.
●Countermeasures are taken against noises in combination with the applicable cover case.
●The type aligned in single-row, low profile type, is available for pin header locking
system, in addition to standard products.
Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64
HIF2 Series (Board direct mount type)
12-row parallel type (HIF2E)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
2.54mm grid alignment facilitates to the design pattern.
24-row staggered type (HIF2C)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
Mounting height is 4.9mm low profile type.
1
2
HIF5 Series (Card edge ribbon type)
●Three types of full hole, semi-hole and no mount area are provided for the unit mount area.
●Connectors are connected in the bus line system.
●Cables can be returned within the connector mold width.
Number of contacts: 20, 26, 34, 40, 50, 60
RC Series (Micro ribbon connector)
●Since the cable insulation displacement area is standard pitch 1.27mm, the standard
ribbon cable can be easily utilized.
●Countermeasures are taken against noises in combination with the cover case.
●Cover case is light weight and compact.
●Straight and right angle types are installed on the dip side.
Number of contacts: 14, 24, 36, 50
FD Series (D sub-ribbon connector)
●The standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a
jig, in addition to the same pitch 1.38mm as for the D sub connector.
●The space saving type allows to reduce the thickness on the connection side according
to set miniaturization.
●Connectors can be installed from both front and rear sides of the chassis or panel.
Number of contacts: 9, 15, 25, 37
A133