UNISONIC TECHNOLOGIES CO., LTD MBR10200C Preliminary DIODE SCHOTTKY BARRIER RECTIFIER FEATURES * 10 amps total (20 amps per diode leg) * Guard ring for transient protection * Low forward voltage drop * High surge capability * Low power loss/High efficiency SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR10200CL-TA3-T MBR10200CG-TA3-T MBR10200CL-TF3-T MBR10200CG-TF3-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F Pin Assignment 1 2 3 A K A A K A Packing Tube Tube MARKING INFORMATION PACKAGE MARKING TO-220/TO-220F www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-185.a MBR10200C Preliminary ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER Maximum Repetitive Peak Reverse Voltage Maximum non-repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Per Leg Average Forward Rectified Output Current Total Non-Repetitive Peak Forward Surge Current 8.3ms Single Half-Sine-Wave Junction Capacitance (Note 4) Operating Temperature Storage Temperature SYMBOL VRRM VRM VR RATINGS 200 200 200 5 10 UNIT V V V A A IFSM 150 A CJ TJ TSTG 300 -65 ~ +150 -65 ~ +150 pF °C °C IO THERMAL DATA PARAMETER SYMBOL θJA Junction to Ambient Junction to Case DIODE TO-220 TO-220F θJC RATINGS 60 2 4 UNIT °С/W °С/W °С/W ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IF=5A, TC=25°C 0.90 V IF=5A, TC=125°C 0.85 V Instantaneous Forward Voltage Drop (Note 3) VF IF=10A, TC=25°C 1 V IF=10A, TC=125°C 0.95 V Rated DC Voltage, TC=25°C 500 μA Instantaneous Reverse Current (Note 3) IR Rated DC Voltage, TC=125°C 20 mA Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. 2.0μs Pulse Width, f = 1.0KHz. 3. Pulse Test: Pulse Width=300µs, Duty Cycle≤ 2.0%. 4. Applied VR = 4.0V and f = 1.0MHz. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-185.a MBR10200C Preliminary DIODE UTC assum es no responsibility for equipm ent failures that result from using products at v alues that exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or system s where m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-185.a