Abracon APAE1575R1820 1575.42mhz; 18.0 x 18.0 x 2.0mm gps patch antenna Datasheet

1575.42MHZ; 18.0 x 18.0 x 2.0mm GPS Patch Antenna
APAE1575R1820ABDC1-T
RoHS/ RoHS II compliant
18.0 x 18.0 x 2.0mm
MSL level: Not Applicable
| | | | | | | | | | | | | | |
FEATURES:
• High Gain
• Compact Size and Low Profile
• Pin type
• Customization Available
• RoHS Compliance
TYPICAL APPLICATIONS:
Automotive navigation, Marine buoys,
Surveying equipment, Cell phone, Laptop,
Healthcare and medical monitoring devices, PND, PDA
STANDARD SPECIFICATIONS:
Parameters
Min.
Receiving Frequency Range
Center Frequency @ -10dB bandwidth(*)
-10dB bandwidth
Typ.
Units
1575.42±1.023
MHz
1575.42±3.0
MHz
4.5
MHz
Gain@ Center Frequency
VSWR @ Center Frequency
3.3
Polarization Model
Impedance
RHCP
50
dBic
Note
(with adhesive tape, customer
defined frequency)
(Peak gain on standardized
Ground Plane.)
1.5
Frequency Temperature Coefficient
(*)
Max.
20
(Right Hand Circular
Polarization)
Ω
ppm/°C
Application environment, including size of ground plane will affect stated performance. Fine tuning might be required when installed on customer’s PCB.
TEST CONDITIONS & TEST SETUP:
RADIATION PATTERN
Parts shall be measured under a condition (Temp.:
20±15°C, Humidity: 65±20% R.H.)
GROUND
PLANE
SMA
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised
01.30.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
1575.42MHZ; 18.0 x 18.0 x 2.0mm GPS Patch Antenna
APAE1575R1820ABDC1-T
RoHS/ RoHS II compliant
18.0 x 18.0 x 2.0mm
| | | | | | | | | | | | | | |
IMPEDANCE CHARACTERISTICS
OUTLINE DRAWING:
Dimension: mm
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised
01.30.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
1575.42MHZ; 18.0 x 18.0 x 2.0mm GPS Patch Antenna
APAE1575R1820ABDC1-T
RoHS/ RoHS II compliant
18.0 x 18.0 x 2.0mm
| | | | | | | | | | | | | | |
PACKAGING:
“T” is for a vacuum sealed tray containing 50 units.
1000 pieces is the suggested quantity containing 20-trays with 50-pcs per Tray.
NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination during storage.
8
3,6
5
1
7
4
2
Inner Box dimensions (unit: mm)
NO.
Name
1
Inner Box
2
3
4
Package
Vacuum Bag
Certificate of approval
5
6
Label
Cushion
7
8
Tray
Adhesive tape
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
NOTE:
1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information.
2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement.
3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification.
4) When changing your production process, please notify ABRACON immediately.
5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. ABRACON’s products are not
specifically designed for Military, Aviation, Aerospace, Life-dependant Medical
applications or any application requiring high reliability where component failure could result in loss of life and/or property.
For applications
requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is
required. Please contact ABRACON Corporation for more information.
6) All specifications and Marking will be subject to change without notice.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised
01.30.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Similar pages