MACOM MS14-3Y Ms14 series military solid state relay Datasheet

MS14 Series Military Solid State Relay
With Bi-Directional Output to 240mA & 400V
Product Facts
■ 1000V optical isolation
protects control and driver
circuitry from load
transients.
■ Buffered/current limited
input for direct drive from
CMOS or TTL logic.
■ Power MOSFET output chips
for low voltage drop and
virtually no offset voltage.
■ 90 & 240mA output current
options.
■ 100 & 400V output voltage
options.
■ Subminiature hermetically
sealed .100 grid package.
■ Screened per “Y” level of
MIL-PRF-28750D or CII “W”
level.
■ Direct replacement for
TELEDYNE M92F series
MS14 series subminiature
SSRs employ state of the art
photo-voltaic optical isolation
providing 1000Vrms
input/output isolation and back
to back power MOSFET output
chips for ultra-reliable high
speed switching of AC, DC and
bipolar DC loads up to 240mA
at load voltages up to 400Vdc.
The input is current regulated
and buffered to minimize power
dissipation and permit driving
the relay direct from CMOS or
TTL. The relay is packaged in a
custom hermetically sealed
low-profile .100 grid package
which conserves space for high
density PC board circuitry.
CII Part No.
MS14-1Y*
MS14-2Y*
MS14-3Y*
DSCC Dwg. No.
N/A
N/A
87034-001 (qualification pending)
Output Rating
±90mA / 400V
±180mA / 200V
±240mA / 100V
* Note: “W” suffix denotes screening to CII “W” level.
Environmental Characteristics
Electrical Specifications (-55°C to +105°C unless otherwise specified)
Ambient Temperature Range:
Operating: -55°C to +105°C.
Storage: -55°C to +125°C.
Input (2 terminal configuration)
Input supply voltage range (Vcc)
3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2)
Input current (max.) @ 5Vdc
Vibration Resistance:
100 G’s, 10-3,000 Hz.
15mAdc (Notes 1 & 2, Figures 1 & 2)
Must turn-on voltage
3.8Vdc
Shock Resistance:
1,500 G’s, 0.5 ms pulse.
Must turn-off voltage
1.5Vdc
Reverse voltage protection
-32Vdc
Constant Acceleration Resistance:
5,000 G’s.
Input (3 terminal configuration)
Mechanical Characteristics
Weight (max.):
.07 oz. (2 grams)
Control voltage range
0 - 18 Vdc
Control current (max.)
250µAdc @ 5V, 1mA @ 18V
Input supply voltage range (Vcc)
3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2)
Input current (max.) @ 5Vdc
Materials:
Case: DIP, hermetically sealed.
Pins: Copper, gold plated
15mAdc (Notes 1 & 2, Figures 1 & 2)
Must turn-on voltage
0.3Vdc
Must turn-off voltage
2.8Vdc
Schmitt hysterisis (min.)
1.0Vdc
I/O
2 Terminal Input Configuration
Dielectric Strength (min.)
1,000V rms
109 ohms
Insulation Resistance (min.) @ 500Vdc
+Vcc
5
7
LOAD
±VLOAD
4
3
1
LOAD
TTL
LOAD
RETURN
Capacitance (max.)
10pF
Output
Continuous load current (max.) @ 25°C: MS14-1
±90mA (Note 5, Figure 4)
Continuous load current (max.) @ 25°C: MS14-3
±240mA (Note 5, Figure 4)
Continuous load voltage, DC max. or ACpk: MS14-1
3 Terminal Input Configuration
+Vcc
5
7
LOAD
±VLOAD
4
TTL
3
1
LOAD
(–)
LOAD
RETURN
±100V
Continuous load voltage, DC max. or ACpk: MS14-3
±400V
On resistance (max.) @ Tj = 25°C, IL = 100ma: MS14-1
50 ohms (Note 6, Figure 5)
On resistance (max.) @ Tj = 25°C, IL = 100ma: MS14-3
8 ohms (Note 6, Figure 5)
Off-state leakage current (max.) @ VL = 80% max. rated
±50µAdc
Turn-on time (max.)
1 ms (Figure 3)
Turn-off time (max.)
1 ms (Figure 3)
Junction temperature (max.)
150°C
© 2005 by Tyco Electronics Corporation. All Rights Reserved.
CII and TYCO are trademarks.
Other products and company names mentioned herein may be trademarks of their respective owners.
Catalog 9-1773439-2
Revised 4-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
1
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Performance Electronic Products
MS14 Series Military Solid State Relay (Continued)
Figure 2 Series Res. vs. Vcc Supply Voltage (Note 1)
Figure 1 Max. Input Current vs. Input Voltage
2000
15
High
Input
R Series (ohms)
Input Current (mA)
18
Figure 3 Output Turn-on and Turn-off Timing
Low
1500
12
9
Output
1000
6
500
TOn
3
0
0
Off
90%
10% On
5
0
0
10 15 20 25 30 40 50 60
5
10
15
20
25
30
T
Off
35
Vcc (Volts)
Input Voltage, Vcc (Vdc)
Figure 4 Temperature Derating Curve
% Output Current
100
Input Supply Voltage (Vcc)
90
80
70
4V
60
8
12 V
50
16 V
20 V
40
24 V
28 V
32 V
30
V
20
10
0
25 35 45 55 65 75 85 95 105 115 125
Ambient Temperature (°C)
Normalized On Res. Factor (NF)
Figure 5 On-Resistance vs. Temperature (Note 6)
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
25
Figure 6 Simplified Circuit
7 + OUTPUT
+Vcc 5
CONTROL 4
RETURN 3
50
75
100
1 – OUTPUT
125
Junction Temperature (°C)
Figure 7 - Outline Dimensions
CASE
.031 ± .002
TEMPERATURE [.78 ± .05]
MEASUREMENT
7
POINT
.335
[8.51]
SQUARE
MAX.
.200 TYP.
[5.08]
.275 MAX.
.085 REF.
[6.99]
.70 MIN. [2.16]
[17.8]
.100 TYP.
[2.54] 5
.085 REF.
[2.16]
.100 TYP.
[2.54]
.032
[.813]
1
4
.370
[9.40]
3 SQUARE
MAX.
Unless otherwise specified, tolerances are:
±0.010 [0.25] for 2 place decimals
±0.005 [0.13] for 3 place decimals
Terminal numbers are for reference only and do not appear on the header.
.080 [2.03] DIA.
GLASS BEAD
5 PLACES
Notes
1.2 terminal input configuration is compatible with CMOS or open collector TTL (with pull-up resistor).
2.For Vcc levels above 6Vdc, a series limiting resistor is required. See Fig. 2 for resistor value. Use standard resistor value equal to or less than value form the curve.
3.Vcc = 5Vdc for all tests unless otherwise specified.
4.All MS14 Series relays may drive loads connected to either positive or negative referenced power supply lines. Inductive loads must be diode suppressed.
5.If an input series current limiting resistor is used, derating of output current vs. Vcc is not necessary. Curve for 4V applies.
6.On-resistance at any ambient temperature other than 25°C can be computed as follows:
R (@ any T) = R (@ +25°C) x e0.006, where T = new temperature – 25°C, e = 2.7182818 .
9-1773439-2–PDF–KRG–4-05
2
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Similar pages