CREE MHBAWT-0000-000C0BE265E Flexible 9â v, 18â v or 36â v option Datasheet

CLD-DS102 Rev 2J
Product family data sheet
Cree® XLamp® MHB-A LEDs
Product Description
FEATURES
Table of Contents
The XLamp® MHB-A LED is a new
•
Flexible 9‑V, 18‑V or 36‑V options
Characteristics............................................2
generation of high‑power LED that
•
Maximum drive current: 700 mA (9 V),
Flux Characteristics, EasyWhite® Order
350 mA (18 V), 175 mA (36 V)
Codes and Bins - 9 V...................................3
delivers a more effective way to achieve
low‑cost systems than mid‑power (MP)
•
Viewing angle: 115°
Flux Characteristics, EasyWhite® Order
LEDs. Built using Cree’s high‑reliability
•
Available in 70‑CRI, 80‑CRI and 90‑CRI
Codes and Bins - 18 V.................................6
options
Flux Characteristics, EasyWhite® Order
ceramic‑package technology, the XLamp
MHB-A LED is able to operate at higher
•
Unlimited floor life at ≤ 30 ºC/85% RH
Codes and Bins - 36 V.................................9
temperatures than MP LEDs with no
•
Reflow solderable - JEDEC
Relative Spectral Power Distribution.......12
J‑STD‑020C
Relative Flux vs. Junction Temperature...12
reduction in rated lifetime, enabling an
impressive 60% reduction in heat sink
•
Electrically neutral thermal path
Electrical Characteristics..........................13
size and cost. Using up to 26 times
•
RoHS and REACh compliant
Relative Flux vs. Current...........................14
fewer LEDs than MP LEDs to achieve
•
UL recognized component (E349212)
Relative Chromaticity vs. Current.............16
the same performance, the XLamp
®
Relative Chromaticity vs. Temperature....17
MHB-A LED is optimized to simplify
Typical Spatial Distribution.......................17
LED system designs for directional and
Thermal Design.........................................18
semi‑directional applications.
Performance Groups – Luminous Flux...19
Performance Groups – Chromaticity.......20
Cree’s Standard White Chromaticity
Regions Plotted on the 1931 CIE Curve...21
Bin and Order Code Formats....................22
Reflow Soldering Characteristics.............23
Notes.........................................................24
Mechanical Dimensions...........................26
www.cree.com/Xlamp
Tape and Reel............................................27
Packaging..................................................28
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp ® MHB-A LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
5.5
degrees
115
Temperature coefficient of voltage (9 V)
mV/°C
-4
Temperature coefficient of voltage (18 V)
mV/°C
-8
Temperature coefficient of voltage (36 V)
mV/°C
-16
Viewing angle (FWHM)
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
V
Maximum
8000
DC forward current (9 V)
mA
480
700
DC forward current (18 V)
mA
240
350
DC forward current (36 V)
mA
120
175
Reverse current (9 V, 18 V, 36 V)
mA
0.1
Forward voltage (9 V, @ 480 mA, 85 °C)
V
9.25
Forward voltage (9 V, @ 480 mA, 25 °C)
V
Forward voltage (18 V, @ 240 mA, 85 °C)
V
Forward voltage (18 V, @ 240 mA, 25 °C)
V
Forward voltage (36 V, @ 120 mA, 85 °C)
V
Forward voltage (36 V, @ 120 mA, 25 °C)
V
42
LED junction temperature
°C
150
10.5
18.5
21
37
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V
The following table provides order codes for XLamp MHB-A LEDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 22).
Test condition: TJ = 85 °C, 9 V, IF = 480 mA
Nominal
CCT
CRI
Min
70
6500 K
80
90
70
5700 K
80
90
Minimum Luminous Flux
2-Step
3-Step
5-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
D2
510
570
D4
550
615
E2
590
660
MHBAWT-0000000C0BE265E
C4
475
531
MHBAWT-0000000C0HC465E
D2
510
570
D4
550
615
MHBAWT-0000000C0HD465E
B4
410
459
MHBAWT-0000000C0UB465E
C2
440
492
C4
475
531
MHBAWT-0000000C0UC465E
D2
510
570
MHBAWT-0000000C0BD257E
D4
550
615
E2
590
660
MHBAWT-0000000C0BE257E
C4
475
531
MHBAWT-0000000C0HC457E
D2
510
570
D4
550
615
MHBAWT-0000000C0HD457E
B4
410
459
MHBAWT-0000000C0UB457E
C2
440
492
C4
475
531
Group
Order Code
Group
Order Code
Group
Order Code
MHBAWT-0000000C0BD265E
65E
65E
65E
57E
57E
57E
MHBAWT-0000000C0BD465E
MHBAWT-0000000C0HD265E
MHBAWT-0000000C0UC265E
MHBAWT-0000000C0BD457E
MHBAWT-0000000C0HD257E
MHBAWT-0000000C0UC257E
MHBAWT-0000000C0UC457E
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V - Continued
Nominal
CCT
CRI
Min
70
5000 K
80
90
Minimum Luminous Flux
2-Step
3-Step
Group
Flux (lm)
@ 25 °C*
D2
510
570
D4
550
615
E2
590
660
C4
475
531
D2
510
570
D4
550
615
MHBAWT-0000000C0HD450G
MHBAWT-0000000C0HD450E
B4
410
459
MHBAWT-0000000C0UB450G
MHBAWT-0000000C0UB450E
C2
440
492
C4
475
531
C4
475
531
D2
510
570
Group
Order Code
Group
Order Code
50E
Order Code
MHBAWT-0000000C0BD450E
MHBAWT-0000000C0BE250E
MHBAWT-0000000C0HC450G
50G
50G
MHBAWT-0000000C0HD250G
MHBAWT-0000000C0UC250G
MHBAWT-0000000C0HC450E
50E
50E
MHBAWT-0000000C0UC450G
MHBAWT-0000000C0HD250E
MHBAWT-0000000C0UC250E
MHBAWT-0000000C0UC450E
MHBAWT-0000000C0BC440E
40E
MHBAWT-0000000C0BD240E
D4
550
615
MHBAWT-0000000C0BD440E
E2
590
660
MHBAWT-0000000C0BE240E
C4
475
531
80
90
Group
MHBAWT-0000000C0BD250E
70
4000 K
5-Step
Flux (lm)
@ 85 °C
40H
MHBAWT-0000000C0HC440H
D2
510
570
MHBAWT-0000000C0HD240H
B2
380
425
MHBAWT-0000000C0UB240H
B4
410
459
C2
440
492
40H
MHBAWT-0000000C0UB440H
MHBAWT-0000000C0UC240H
40G
MHBAWT-0000000C0HC440G
MHBAWT-0000000C0HD240G
MHBAWT-0000000C0UB240G
40G
MHBAWT-0000000C0UB440G
MHBAWT-0000000C0UC240G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V - Continued
Nominal
CCT
CRI
Min
Minimum Luminous Flux
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
C4
475
531
80
2-Step
Group
35H
510
570
MHBAWT-0000000C0HD235H
A2
330
369
MHBAWT-0000000C0UA235H
A4
355
397
90
3000 K
MHBAWT-0000000C0HC435H
D2
3500 K
80
Order Code
35H
MHBAWT-0000000C0UA435H
3-Step
Group
35G
Order Code
MHBAWT-0000000C0UA235G
35G
MHBAWT-0000000C0UA435G
425
MHBAWT-0000000C0UB235H
B4
410
459
MHBAWT-0000000C0UB435H
MHBAWT-0000000C0UB435G
C2
440
492
MHBAWT-0000000C0HC230H
MHBAWT-0000000C0HC230G
C4
475
531
D2
510
570
MHBAWT-0000000C0HD230H
MHBAWT-0000000C0HD230G
A2
330
369
MHBAWT-0000000C0UA230H
MHBAWT-0000000C0UA230G
A4
355
397
90
30H
MHBAWT-0000000C0UA430H
B2
380
425
MHBAWT-0000000C0UB230H
B4
410
459
MHBAWT-0000000C0UB430H
C2
440
492
80
27H
MHBAWT-0000000C0HC227H
C4
475
531
MHBAWT-0000000C0HC427H
A2
330
369
MHBAWT-0000000C0UA227H
A4
355
397
2700 K
90
27H
MHBAWT-0000000C0UA427H
B2
380
425
MHBAWT-0000000C0UB227H
B4
410
459
MHBAWT-0000000C0UB427H
Order Code
MHBAWT-0000000C0HD235G
380
MHBAWT-0000000C0HC430H
Group
MHBAWT-0000000C0HC435G
B2
30H
5-Step
30G
30G
MHBAWT-0000000C0UB235G
MHBAWT-0000000C0HC430G
MHBAWT-0000000C0UA430G
MHBAWT-0000000C0UB230G
MHBAWT-0000000C0UB430G
27G
MHBAWT-0000000C0HC227G
MHBAWT-0000000C0HC427G
MHBAWT-0000000C0UA227G
27G
MHBAWT-0000000C0UA427G
MHBAWT-0000000C0UB227G
MHBAWT-0000000C0UB427G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V
The following table provides order codes for XLamp MHB-A LEDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 22).
Test condition: TJ = 85 °C, 18 V, IF = 240 mA
Nominal
CCT
CRI
Min
70
6500 K
80
90
70
5700 K
80
90
Minimum Luminous Flux
2-Step
3-Step
5-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
D2
510
570
D4
550
615
E2
590
660
MHBAWT-0000000F0BE265E
C4
475
531
MHBAWT-0000000F0HC465E
D2
510
570
D4
550
615
MHBAWT-0000000F0HD465E
B4
410
459
MHBAWT-0000000F0UB465E
C2
440
492
C4
475
531
MHBAWT-0000000F0UC465E
D2
510
570
MHBAWT-0000000F0BD257E
D4
550
615
E2
590
660
MHBAWT-0000000F0BE257E
C4
475
531
MHBAWT-0000000F0HC457E
D2
510
570
D4
550
615
MHBAWT-0000000F0HD457E
B4
410
459
MHBAWT-0000000F0UB457E
C2
440
492
C4
475
531
Group
Order Code
Group
Order Code
Group
Order Code
MHBAWT-0000000F0BD265E
65E
65E
65E
57E
57E
57E
MHBAWT-0000000F0BD465E
MHBAWT-0000000F0HD265E
MHBAWT-0000000F0UC265E
MHBAWT-0000000F0BD457E
MHBAWT-0000000F0HD257E
MHBAWT-0000000F0UC257E
MHBAWT-0000000F0UC457E
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V - Continued
Nominal
CCT
CRI
Min
70
5000 K
80
90
Minimum Luminous Flux
2-Step
3-Step
Group
Flux (lm)
@ 25 °C*
D2
510
570
D4
550
615
E2
590
660
C4
475
531
D2
510
570
D4
550
615
MHBAWT-0000000F0HD450G
MHBAWT-0000000F0HD450E
B4
410
459
MHBAWT-0000000F0UB450G
MHBAWT-0000000F0UB450E
C2
440
492
C4
475
531
C4
475
531
D2
510
570
Group
Order Code
Group
Order Code
50E
Order Code
MHBAWT-0000000F0BD450E
MHBAWT-0000000F0BE250E
MHBAWT-0000000F0HC450G
50G
50G
MHBAWT-0000000F0HD250G
MHBAWT-0000000F0UC250G
MHBAWT-0000000F0HC450E
50E
50E
MHBAWT-0000000F0UC450G
MHBAWT-0000000F0HD250E
MHBAWT-0000000F0UC250E
MHBAWT-0000000F0UC450E
MHBAWT-0000000F0BC440E
40E
MHBAWT-0000000F0BD240E
D4
550
615
MHBAWT-0000000F0BD440E
E2
590
660
MHBAWT-0000000F0BE240E
C4
475
531
80
90
Group
MHBAWT-0000000F0BD250E
70
4000 K
5-Step
Flux (lm)
@ 85 °C
40H
MHBAWT-0000000F0HC440H
D2
510
570
MHBAWT-0000000F0HD240H
B2
380
425
MHBAWT-0000000F0UB240H
B4
410
459
C2
440
492
40H
MHBAWT-0000000F0UB440H
MHBAWT-0000000F0UC240H
40G
MHBAWT-0000000F0HC440G
MHBAWT-0000000F0HD240G
MHBAWT-0000000F0UB240G
40G
MHBAWT-0000000F0UB440G
MHBAWT-0000000F0C240G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V - Continued
Nominal
CCT
CRI
Min
Minimum Luminous Flux
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
C4
475
531
80
2-Step
Group
35H
510
570
MHBAWT-0000000F0HD235H
A2
330
369
MHBAWT-0000000F0UA235H
A4
355
397
90
3000 K
MHBAWT-0000000F0HC435H
D2
3500 K
80
Order Code
35H
MHBAWT-0000000F0UA435H
3-Step
Group
35G
Order Code
MHBAWT-0000000F0UA235G
35G
MHBAWT-0000000F0UA435G
425
MHBAWT-0000000F0UB235H
B4
410
459
MHBAWT-0000000F0UB435H
MHBAWT-0000000F0UB435G
C2
440
492
MHBAWT-0000000F0HC230H
MHBAWT-0000000F0HC230G
C4
475
531
D2
510
570
MHBAWT-0000000F0HD230H
MHBAWT-0000000F0HD230G
A2
330
369
MHBAWT-0000000F0UA230H
MHBAWT-0000000F0UA230G
A4
355
397
90
30H
MHBAWT-0000000F0UA430H
B2
380
425
MHBAWT-0000000F0UB230H
B4
410
459
MHBAWT-0000000F0UB430H
C2
440
492
80
27H
MHBAWT-0000000F0HC227H
C4
475
531
MHBAWT-0000000F0HC427H
A2
330
369
MHBAWT-0000000F0UA227H
A4
355
397
2700 K
90
27H
MHBAWT-0000000F0UA427H
B2
380
425
MHBAWT-0000000F0UB227H
B4
410
459
MHBAWT-0000000F0UB427H
Order Code
MHBAWT-0000000F0HD235G
380
MHBAWT-0000000F0HC430H
Group
MHBAWT-0000000F0HC435G
B2
30H
5-Step
30G
30G
MHBAWT-0000000F0UB235G
MHBAWT-0000000F0HC430G
MHBAWT-0000000F0UA430G
MHBAWT-0000000F0UB230G
MHBAWT-0000000F0UB430G
27G
MHBAWT-0000000F0HC227G
MHBAWT-0000000F0HC427G
MHBAWT-0000000F0UA227G
27G
MHBAWT-0000000F0UA427G
MHBAWT-0000000F0UB227G
MHBAWT-0000000F0UB427G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V
The following table provides order codes for XLamp MHB-A LEDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 22).
Test condition: TJ = 85 °C, 36 V, IF = 120 mA
Nominal
CCT
CRI
Min
70
6500 K
80
90
70
5700 K
80
90
Minimum Luminous Flux
2-Step
3-Step
5-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
D2
510
570
D4
550
615
E2
590
660
MHBAWT-0000000N0BE265E
C4
475
531
MHBAWT-0000000N0HC465E
D2
510
570
D4
550
615
MHBAWT-0000000N0HD465E
B4
410
459
MHBAWT-0000000N0UB465E
C2
440
492
C4
475
531
MHBAWT-0000000N0UC465E
D2
510
570
MHBAWT-0000000N0BD257E
D4
550
615
E2
590
660
MHBAWT-0000000N0BE257E
C4
475
531
MHBAWT-0000000N0HC457E
D2
510
570
D4
550
615
MHBAWT-0000000N0HD457E
B4
410
459
MHBAWT-0000000N0UB457E
C2
440
492
C4
475
531
Group
Order Code
Group
Order Code
Group
Order Code
MHBAWT-0000000N0BD265E
65E
65E
65E
57E
57E
57E
MHBAWT-0000000N0BD465E
MHBAWT-0000000N0HD265E
MHBAWT-0000000N0UC265E
MHBAWT-0000000N0BD457E
MHBAWT-0000000N0HD257E
MHBAWT-0000000N0UC257E
MHBAWT-0000000N0UC457E
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V - Continued
Nominal
CCT
CRI
Min
70
5000 K
80
90
Minimum Luminous Flux
2-Step
3-Step
Group
Flux (lm)
@ 25 °C*
D2
510
570
D4
550
615
E2
590
660
C4
475
531
D2
510
570
D4
550
615
MHBAWT-0000000N0HD450G
MHBAWT-0000000N0HD450E
B4
410
459
MHBAWT-0000000N0UB450G
MHBAWT-0000000N0UB450E
C2
440
492
C4
475
531
C4
475
531
D2
510
570
Group
Order Code
Group
Order Code
50E
Order Code
MHBAWT-0000000N0BD450E
MHBAWT-0000000N0BE250E
MHBAWT-0000000N0HC450G
50G
50G
MHBAWT-0000000N0HD250G
MHBAWT-0000000N0UC250G
MHBAWT-0000000N0HC450E
50E
50E
MHBAWT-0000000N0UC450G
MHBAWT-0000000N0HD250E
MHBAWT-0000000N0UC250E
MHBAWT-0000000N0UC450E
MHBAWT-0000000N0BC440E
40E
MHBAWT-0000000N0BD240E
D4
550
615
MHBAWT-0000000N0BD440E
E2
590
660
MHBAWT-0000000N0BE240E
C4
475
531
80
90
Group
MHBAWT-0000000N0BD250E
70
4000 K
5-Step
Flux (lm)
@ 85 °C
40H
MHBAWT-0000000N0HC440H
D2
510
570
MHBAWT-0000000N0HD240H
B2
380
425
MHBAWT-0000000N0UB240H
B4
410
459
C2
440
492
40H
MHBAWT-0000000N0UB440H
MHBAWT-0000000N0UC240H
40G
MHBAWT-0000000N0HC440G
MHBAWT-0000000N0HD240G
MHBAWT-0000000N0UB240G
40G
MHBAWT-0000000N0UB440G
MHBAWT-0000000N0C240G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® MHB-A LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V - Continued
Nominal
CCT
CRI
Min
Minimum Luminous Flux
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
C4
475
531
80
2-Step
Group
35H
510
570
MHBAWT-0000000N0HD235H
A2
330
369
MHBAWT-0000000N0UA235H
A4
355
397
90
3000 K
MHBAWT-0000000N0HC435H
D2
3500 K
80
Order Code
35H
MHBAWT-0000000N0UA435H
3-Step
Group
35G
Order Code
MHBAWT-0000000N0UA235G
35G
MHBAWT-0000000N0UA435G
425
MHBAWT-0000000N0UB235H
B4
410
459
MHBAWT-0000000N0UB435H
MHBAWT-0000000N0UB435G
C2
440
492
MHBAWT-0000000N0HC230H
MHBAWT-0000000N0HC230G
C4
475
531
D2
510
570
MHBAWT-0000000N0HD230H
MHBAWT-0000000N0HD230G
A2
330
369
MHBAWT-0000000N0UA230H
MHBAWT-0000000N0UA230G
A4
355
397
90
30H
MHBAWT-0000000N0UA430H
B2
380
425
MHBAWT-0000000N0UB230H
B4
410
459
MHBAWT-0000000N0UB430H
C2
440
492
80
27H
MHBAWT-0000000N0HC227H
C4
475
531
MHBAWT-0000000N0HC427H
A2
330
369
MHBAWT-0000000N0UA227H
A4
355
397
2700 K
90
27H
MHBAWT-0000000N0UA427H
B2
380
425
MHBAWT-0000000N0UB227H
B4
410
459
MHBAWT-0000000N0UB427H
Order Code
MHBAWT-0000000N0HD235G
380
MHBAWT-0000000N0HC430H
Group
MHBAWT-0000000N0HC435G
B2
30H
5-Step
30G
30G
MHBAWT-0000000N0UB235G
MHBAWT-0000000N0HC430G
MHBAWT-0000000N0UA430G
MHBAWT-0000000N0UB230G
MHBAWT-0000000N0UB430G
27G
MHBAWT-0000000N0HC227G
MHBAWT-0000000N0HC427G
MHBAWT-0000000N0UA227G
27G
MHBAWT-0000000N0UA427G
MHBAWT-0000000N0UB227G
MHBAWT-0000000N0UB427G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® MHB-A LED
Relative Spectral Power Distribution
Relative Spectral Power Distribution
100%
Relative Spectral Power
90%
80%
70%
60%
6500 K, 80 CRI
50%
5000 K, 80 CRI
40%
3000 K, 80 CRI
30%
20%
10%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux vs. Junction Temperature
Relative Flux Output vs. Junction Temperature
Test condition: 9 V, If = 480 mA; 18 V, If = 240 mA; 36 V, IF = 120 mA
Relative Luminous Flux
120%
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® MHB-A LED
Electrical Characteristics (TJ = 85 °C)
700
Forward Current (mA)
600
500
400
9V
300
200
100
0
8.00
8.25
8.50
8.75
9.00
9.25
9.50
9.75
Forward Voltage (V)
350
Forward Current (mA)
300
250
200
18 V
150
100
50
0
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
Forward Voltage (V)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® MHB-A LED
Electrical Characteristics (Tj = 85ºC)
Electrical Characteristics (TJ = 85 °C) - Continued
175
Forward Current (mA)
150
125
100
36 V
75
50
25
0
32
33
34
35
36
37
38
39
Forward Voltage (V)
Relative Flux vs. Current (TJ = 85 °C)
140%
Relative Luminous Flux
120%
100%
80%
9V
60%
40%
20%
0%
0
100
200
300
400
500
600
700
Forward Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® MHB-A LED
Relative Flux vs. Current (TJ = 85 °C) - Continued
140%
Relative Luminous Flux
120%
100%
80%
18 V
60%
40%
20%
0%
0
50
100
150
200
250
300
350
Forward Current (mA)
Relative Intensity vs. Current (Tj = 85ºC)
140%
Relative Luminous Flux
120%
100%
80%
36 V
60%
40%
20%
0%
0
25
50
75
100
125
150
175
Forward Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® MHB-A LED
Relative Chromaticity vs. Current (Warm White)
0.015
9V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
100
200
300
400
500
600
700
Current (mA)
0.015
18 V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
50
100
150
200
250
300
350
Current (mA)
0.015
36 V
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
25
50
75
100
125
150
175
Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® MHB-A LED
Relative Chromaticity vs. Temperature (Warm White)
Test condition: 9 V, If = 480 mA; 18 V, If = 240 mA; 36 V, IF = 120 mA
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
25
50
75
100
125
150
Tj (°C)
Typical Spatial Distribution
Test condition:
9 V, If = 480 mA; 18 V, If = 240 mA; 36 V, IF = 120 mA
Far Field
100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® MHB-A LED
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
800
Maximum Current (mA)
700
600
500
400
9V
300
Rj-a = 7 °C/W
200
Rj-a = 10 °C/W
100
Rj-a = 20 °C/W
0
Rj-a = 15 °C/W
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
400
Maximum Current (mA)
350
300
250
200
18 V
150
Rj-a = 7 °C/W
100
Rj-a = 10 °C/W
50
Rj-a = 20 °C/W
0
Rj-a = 15 °C/W
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® MHB-A LED
Thermal Design
Thermal
Design - Continued
200
Maximum Current (mA)
175
150
125
100
36 V
75
Rj-a = 7 °C/W
50
Rj-a = 10 °C/W
25
Rj-a = 20 °C/W
0
Rj-a = 15 °C/W
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Performance Groups – Luminous Flux (TJ = 85 °C)
XLamp MHB-A LEDs are tested for luminous flux and placed into one of the following bins.
Group Code
Minimum Luminous Flux
Maximum Luminous Flux
A2
330
355
A4
355
380
B2
380
410
B4
410
440
C2
440
475
C4
475
510
D2
510
550
D4
550
590
E2
590
635
E4
635
680
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® MHB-A LED
Performance Groups – Chromaticity
XLamp MHB-A LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Code
40H
35H
30H
27H
CCT
4000 K
3500 K
3000 K
2700 K
x
y
0.3777
0.3739
0.3797
0.3816
0.3861
0.3855
0.3838
0.3777
0.4022
0.3858
0.4053
0.3942
0.4125
0.3977
0.4091
0.3891
0.4287
0.3975
0.4328
0.4064
0.4390
0.4086
0.4347
0.3996
0.4524
0.4048
0.4574
0.4140
0.4633
0.4154
0.4581
0.4062
EasyWhite Color Temperatures – 3-Step Ellipse
Center Point
Major Axis
Minor Axis
x
y
a
b
Rotation Angle
(°)
5000 K
0.3447
0.3553
0.00840
0.00312
65.0
4000 K
0.3818
0.3797
0.00939
0.00402
53.7
35G
3500 K
0.4073
0.3917
0.00927
0.00414
53.2
30G
3000 K
0.4338
0.4030
0.00834
0.00408
53.2
27G
2700 K
0.4577
0.4099
0.00834
0.00420
48.5
Major Axis
Minor Axis
Bin Code
CCT
50G
40G
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code
CCT
65E
6500 K
Center Point
x
y
a
b
Rotation Angle
(°)
0.3123
0.3282
0.01110
0.00550
61.0
57E
5700 K
0.3287
0.3417
0.01230
0.00600
72.0
50E
5000 K
0.3447
0.3553
0.01400
0.00520
65.0
40E
4000 K
0.3818
0.3797
0.01565
0.00670
53.7
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® MHB-A LED
Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve
0.44
ANSI C78.377 Quadrangle
0.43
EasyWhite 5-Step
0.42
EasyWhite 3-Step
0.41
EasyWhite 2-Step
2700 K
3000 K
3500 K
4000 K
0.40
4500 K
0.39
5000 K
0.38
CCy
0.37
5700 K
0.36
6500 K
0.35
0.34
8000 K
0.33
0.32
0.31
0.30
0.29
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.28
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® MHB-A LED
Bin and Order Code Formats
Bin codes and order codes for MHB-A LEDs are configured in the following manner:
Order CodeBin Code
Series
MHBA = MHB-A
Series
MHBA = MHB-A
Internal code
Chromaticity bin
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Vf class
C0 = 9-V class
F0 = 18-V class
N0 = 36-V class
Chromaticity region
Internal code
SSSSCC-WWW-FF-GGN-AAAAA
SSSSCC-HHHH-HHHGGNFFDDD
Flux
Vf class
C0 = 9-V class
F0 = 18-V class
N0 = 36-V class
Color
WT = White
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Flux bin
Color
WT = White
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® MHB-A LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp MHB-A LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® MHB-A LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp MHB-A LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® MHB-A LED
Notes - Continued
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer
to the LED Eye Safety application note.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® MHB-A LED
Mechanical Dimensions
Thermal vias, if present, are not shown on these drawings.
4.70
4.70
All measurements are ±.13 mm unless otherwise indicated.
0.8
±.1
5.00
3.70
3.70
.50
.71.45
.50
.45
5.00
4.7
4.70
4.70
3.70
5.00
OPTICAL REFERENCE
5.00
0
5.00
4.70
4.70
3.70
3.70
.50
.45
.45
4.70
3.70
.50
2.80
.45
PRIMARY
.50
4.78
.50
4.70
REF.
Cathode
Side
4.78
.50
.50
OPTICAL REFERENCE
2.80
Side View
5.00
Anode
Side
.45
OPTICAL REFERENCE
Top View
.50
4.70
REF.
Cathode
Side
Anode
Side
.80
.50
4.70
PRIMARY
.50.80
4.70
4.70
4.70
.50
4.70 .25 4.70
REF.
REF.
2.80
.25
OPTICAL REFERENCE
.80
.80
2.80
PRIMARY
4.78
4.78
4.78
2.80
ALTERNATIVE
Alternate
Bottom
ALTERNATIVE
PRIMARY PRIMARY
4.78
.80
.80
.50
.50
.50
.25
.97
.50
.25
.50
4.78
.25
4.78
.80
.25
.25
.25
.97
.97
2.78
2.78
.97
Recommended
PCB Solder Pad
4.78
.25
4.78
.80
4.78
4.78
.80
4.78
2.78
View
.80
4.78.80
.97
.97
.80
4.78
.25
.50
.50
.25
4.78
4.78
.25
2.80
Bottom View
.50
2.78
PRIMARY
4.78
4.78
4.78
Recommended Stencil Pattern
(Shaded Area is Open)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp ® MHB-A LED
Tape and Reel
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm [in].
CATHODE SIDE
ANODE SIDE
6
5
4
3
2
1
2400-00009
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
INDEX
QTY
ITEM
COMMENTS
1
2
1
2
2400-00009-CORE
2400-00009-REEL
D
D
12.4
+.2
.0
MEASURED AT HUB
C
330
+.25
-.75
C
16.4
+0.2
.0
MEASURED AT HUB
1.9±.4
21 ±.4
13.1 ±.2
B
B
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
REVISONS
REV
DESCRIPTION
DRAWN BY
A
BY
DATE
APP'D
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
UNLESS OTHERWISE SPECIFIED
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
D. CRONIN
CHECK
DATE
4600 Silicon Drive
Durham, N.C 27703
09/29/09
27
DATE
-APPROVED
-MATERIAL
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
--
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
XLamp ® MHB-A LED
Packaging
Humidity Indicator
Card (inside bag)
Dessicant
(inside bag)
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Label with Custo
Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
Similar pages