Rev. Apr. 10 AEM GcDiodeTM ESD Suppressors Part Number: ES0603V014BT, ES0402V014BT Features： · Glass ceramic monolithic structure · Ultra low capacitance (0.25pF typical) · Low leakage current (<0.1nA) · Fast response time (<1ns) · Bi-directional flip-chip design · Low clamping voltage · Silver termination with nickel · Durability of withstanding 8kV strikes exceeding 5000 times · 100% lead-free and RoHS compliant Electrical Characteristics: Characteristic Value IEC61000-4-2 Direct Discharge Level 4 － 8kV IEC61000-4-2 Air Discharge Level 4 －15kV Trigger Voltage 500V (typical) (measured per IEC61000-4-2, Level 4, 8kV) Clamping Voltage 50V (typical) (measured per IEC61000-4-2, Level 4, 8kV) Response Time Less than 1ns Capacitance (1GHz) 0.25pF (typical) Leakage Current Less than 0.1nA (typical) (measured at 14VDC) Rated Voltage 14VDC (max.) Website: www.aemchina.com Rev. Apr. 10 AEM GcDiodeTM ESD Suppressors Operating Temperature Range: -55℃ ~ +125℃ Typical Applications: USB, IEEE1394, HDMI, DisplayPort, DVI, Antennas, UDI, E-SATA, LCD TV, Set Top Box, DVD, LCD Monitor, Notebook, Mobile Phone, Netbook, MID Shape and Dimensions: Inch (mm) Size L W T BW 0603 (1608) 0.063±0.006 (1.60±0.15) 0.031±0.006 (0.80±0.15) 0.031±0.006 (0.80±0.15) 0.014±0.006 (0.36±0.15) 0402 (1005) 0.039±0.004 (1.00±0.10) 0.020±0.004 (0.51±0.10) 0.020±0.004 (0.51±0.10) 0.010±0.004 (0.25±0.10) Recommended PC Board Land Pattern: Inch (mm) Chip Size L G H 0603 (1608) 0.110 (2.80) 0.024 (0.60) 0.039 (1.00) 0402 (1005) 0.063 (1.60) 0.016 (0.40) 0.028 (0.70) Website: www.aemchina.com Rev. Apr. 10 AEM GcDiodeTM ESD Suppressors Product Identification: ES (1) 0603 (2) V014 B (3) (4) T (5) (1) Category code (2) Dimension code: L x W (inch) The first two digits - L (length) The last two digits - W (width) (3) Rated voltage code: V014 -14 VDC (4) Series code (5) Package code: T - Tape & Reel B - Bulk Representative test waveform per IEC61000-4-2 Level 4, 8kV: ESD curve without GcDiode Y2 Y1 Suppressed ESD curve with GcDiode Website: www.aemchina.com Rev. Apr. 10 AEM GcDiodeTM ESD Suppressors Recommended Temperature Profiles for Soldering: AEM’s ESD suppressors can be soldered on PCB using wave or reflow soldering processes. Recommended conditions for hand soldering: 1. Appropriate temperature (max.) of soldering iron tip/soldering time (max.): 280°C /10s or 350°C / 3s. 2. Using hot air rework station with tip that can melt the solder on both terminations at the same time is strongly recommended. Do not directly contact the chip termination with the tip of soldering iron. Website: www.aemchina.com Rev. Apr. 10 AEM GcDiodeTM ESD Suppressors Reliability Tests: Reliability Test Test Conditions and Requirements Flexure Strength 2 mm bend, meet triggering voltage and clamping voltage requirements while being bent, and meet leakage current requirement after bending. Solderability 255ºC, 5 seconds 90% coverage min. Soldering Heat Resistance 260ºC, 10 seconds, No mechanical damage Pass ESD test. Life 100 direct contact discharge level 4, 8kV No open or short Pass ESD test (Except leakage current ≤10µA) Thermal Shock 100 cycles between –65℃ and +125℃ No mechanical damage Pass ESD test Mechanical Vibration 0.4”D.A. or 30G between 5-3000Hz No mechanical damage Pass ESD test Mechanical Shock 1500G, 0.5ms, half-sine shocks No mechanical damage Pass ESD test Salt Spray 48 hour exposure No excessive corrosion Pass ESD test Moisture Resistance 10 cycles No excessive corrosion Pass ESD test Endurance 85℃, 1000 hours, rated voltage Leakage current less than 100nA Website: www.aemchina.com Rev. Apr. 10 AEM GcDiodeTM ESD Suppressors Packaging: Tape Dimensions: Inch (mm) Surface mount ESD suppressors are provided on tape-and-reel for use in pick-and-place machines or in bulk for special applications. Both tape-and-reel and bulk products are sealed in plastic bags with desiccant. The reel size is 7 inches. Size Ao Bo Ko Type 0402 (1005) 0.026±0.004 (0.67±0.10) 0.046±0.004 (1.17±0.10) 0.025±0.004 (0.63±0.10) Paper 0603 (1608) 0.045±0.004 (1.15±0.10) 0.073±0.004 (1.85±0.10) 0.043±0.004 (0.93±0.10) Paper E1 0603 (1608) 0402 (1005) F W P1 P0 P2 D1 t 0.069+0.004 0.138+0.002 0.318+0.004 0.157+0.004 0.157+0.004 0.079+0.002 0.059+0.004 (1.75±0.10) (3.50±0.05) (8.00±0.10) (4.00+0.10) (4.00+0.10) (2.00+0.05) (1.50+0.10/0.00) N/A 0.009+0.001 (0.23+0.02) 0.069+0.004 0.138+0.002 0.318+0.004 0.079+0.004 0.157+0.004 0.040+0.002 0.059+0.004 (1.75±0.10) (3.50±0.05) (8.00±0.10) (2.00+0.10) (4.00+0.10) (1.00+0.05) (1.50+0.10/0.00) N/A 0.009+0.001 (0.23+0.02) Quantity Per Reel: Chip Size Parts on 7 inch (178 mm) Reel 0603 (1608) 4,000 0402(1005) 10,000 Other sizes and chip quantities can be provided upon customer's request. Website: www.aemchina.com D0 Rev. Apr. 10 AEM GcDiodeTM ESD Suppressors Storage: ·The maximum ambient temperature shall not exceed 40℃. Storage temperature higher than 40℃ could result in the deformation of packaging materials. ·The maximum relative humidity recommended for storage is 70%. High humidity with high temperature could accelerate the oxidation of the solder plating on the termination and reduce the solderability of the components. ·Sealed plastic bags with desiccant shall be used to reduce the oxidation of the termination and shall only be opened prior to use. ·The products shall not be stored in areas where harmful gases containing sulfur or chlorine are present. Specifications and descriptions in this literature are as accurate as known at the time of printing, but are subject to change without notice. For the most updated information, please consult the factory. Copyright © 2008 AEM Components (Suzhou) Co. Ltd. Website: www.aemchina.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AEM: ES0402V014BT ES0603V014BT