Infrared detector modules with preamp Thermoelectrically cooled type Easy-to-use detector modules with built-in preamps Infrared detector modules operate just by connecting to DC power supplies. The detector is selectable from among InAs and MCT, which are all combined with a thermoelectric cooler. We welcome requests for custom devices that suit your application. Features Applications High S/N Infrared detection Compact size Accessories Easy to use Operates just by connecting to DC power supply Circuit design optimized for detector characteristics Built-in temperature control circuit (fixed control temperature) 6-conductor cable for TE-cooled type (for DC power supply) A4372-07: 2 m (connector installed at one end) Instruction manual Structure / Absolute maximum ratings Type no. C12492-210 C12495-211S C12495-311M C12495-111L Detector Photosensitive area InAs (P10090-21) MCT (P3981) MCT (P2750) MCT (P3257-101) (mm) φ1 1×1 1×1 1×1 Absolute maximum ratings Operating temperature Storage temperature Supply voltage Topr Tstg Vcc Vp*1 (°C) (°C) (V) (V) +5 +5 0 to +40 -20 to +50 ±18 +7 +5 *1: Power supply for TE-cooled detector Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. www.hamamatsu.com 1 Infrared detector modules with preamp Thermoelectrically cooled type Electrical and optical characteristics (Typ. Ta=25 °C, Vcc=±15 V, Vp=+2.5 V *2, unless otherwise noted) Type no. C12492-210 C12495-211S C12495-311M C12495-111L Noise Frequency Element Peak Photosensitivity equivalent response temper- sensitivity Cutoff power -3 dB λ=λp ature wavelength waveNEP (Hz) Td λp length fcL fcH (V/W) (W/Hz1/2) (°C) (μm) Min. Typ. Typ. Max. Typ. Max. Min. Typ. -28 3.25 3.45 0.8 × 107 1.0 × 107 4.0 × 10-12 1.0 × 10-11 5 10 80 k 100 k -25 3.6 4.3 1.3 × 107 2.0 × 107 2.0 × 10-12 1.0 × 10-11 5 10 7 k 15 k -58 4.8 5.5 0.8 × 107 1.0 × 107 5.0 × 10-12 3.0 × 10-11 5 10 20 k 35 k -3 6.5 11.5 1.3 2 2.0 × 10-7 1.2 × 10-6 0 - 350 k 500 k Maximum Current Output output Supply voltage*3 consumption impe- voltage (V) (mA) dance RL=1 kΩ (V) Vcc, Vee Vp Vcc=±15V Vp (Ω) Min. Typ. Min. Typ. Max. Min. Typ. Max. Typ. Max. Typ. Max. 50 ±12 ±13 ±14.5 ±15 ±15.5 2.4 2.5 3.5 +60,-20 +80,-30 600 1100 50 ±12 ±13 ±14.5 ±15 ±15.5 2.4 2.5 3.5 +60,-16 +80,-25 600 1100 50 ±12 ±13 ±14.5 ±15 ±15.5 4.25 4.5 4.75 +60,-16 +80,-25 600 1100 50 12 13 ±14.5 ±15 ±15.5 2.4 2.5 3.5 +130,-20 +150,-30 800 1400 *2: Vp=+2.5 V (C12492-210, C12495-211S), +4.5 V (C12495-311M) *3: Vcc=±15 V, Vp1=2.5 V or Vp2=4.5 V Recommended DC power supply (analog power supply): E3630A (Agilent Technologies) Current capacity: More than 1.5 times the maximum current consumption Ripple noise: 5 mVp-p or less (±15 V power supply) 5 mVp-p or less (+2.5 V, +4.5 V power supply) Spectral response (Typ.) 1012 C12495-211S (Td=-25 °C) 1011 C12495-311M (Td=-58 °C) D* (cm · Hz1/2/W) 1010 109 C12492-210 (Td=-28 °C) 8 C12495-111L (Td=-3 °C) 10 7 10 106 105 1 2 3 4 5 6 7 8 9 10 11 12 Wavelength (µm) KIRDB0551EA 2 Infrared detector modules with preamp Thermoelectrically cooled type Dimensional outlines (unit: mm) C12492-210/C12495-211S (4×) 3.2 depth 14.5 + M3 depth 5 (for M3 countersunk screw) 3.3 ± 0.2 26 ± 0.3 20 45 Photosensitive area Photosensitive surface 75.2 26 ± 0.3 40 Cooling fin (front side) (4 ×) M3 depth 5 (threaded hole) 2 46 ± 0.3 0.8 26.5 12 20 ± 0.3 BNC connector (signal output) 6-pin connector (voltage input) 50 Tolerance unless otherwise noted: ±1 KIRDA00232EA Note: The cooling fin (front side) is removable. The cooling performance is not guaranteed if removed. C12495-311M (4×) 3.2 depth 24.5 + M3 depth 5 (for M3 countersunk screw) 4.6 ± 0.5 (photosensitive surface) 20 Photosensitive surface 3 45 34 ± 0.3 8 Photosensitive area 7 31 ± 0.3 66.5 7 45 50 0.2 116.5 46 ± 0.3 Cooling fin (front side) 26.5 12 20 ± 0.3 BNC connector (signal output) 6-pin connector (voltage input) (4 ×) M3 depth 5 (threaded hole) Tolerance unless otherwise noted: ±1 KIRDA0233EA Note: The cooling fin (front side) is removable. The cooling performance is not guaranteed if removed. 3 Infrared detector modules with preamp Thermoelectrically cooled type C12495-111L (4×) 3.2ġdepthġ14.5 + M3 depth 5 (for M3 countersunk screw) 4.85 ± 0.2 26 ± 0.3 20 45 Photosensitive area Photosensitive surface 92 26 ± 0.3 40 Cooling fin (front side) (4 ×) M3 Depth 5 (threaded hole) 27.2 0.7 ± 0.4 2 62.8 ± 0.3 26.5 12 20 ± 0.3 20 ± 0.3 BNC connector (signal output) 6-pin connector (voltage input) 92 Offset voltage adjustment screw Tolerance unless otherwise noted: ±1 KIRDA00235EA Note: The cooling fin (front side) is removable. The cooling performance is not guaranteed if removed. Cable (for DC power supply) A4372-07 12.3 4.8 Solder processing 36 90 ± 10 1900 ± 10 Connector: LF07WBP-6P (made by Hirose Electric) Tolerance unless otherwise noted: ±1 Pin no. Plug (looking into the plug) 10 ± 2 Pin connection +2.5 V or +4.5 V Power supply for cooling controller GND Power supply for cooling controller Output for temperature monitor +15 V -15 V GND Note: With shield wire Lead color Red Blue Light green Yellow White Black KIRDA0241EA Note: Remove the braid from the shield cable and keep the wires together. 4 Infrared detector modules with preamp Thermoelectrically cooled type Precautions · This detector will not operate without cooling. Always supply +2.5 V or +4.5 V to cool the detector element. · Always use a dual-polarity (±15 V) power supply to operate this detector. Never use a single-polarity (+15 V or -15 V only) power supply. Using a single-polarity power supply may cause the amplifier in the detector module to break down. · Be careful not to apply excessive force to the detector element surface. Applying excessive force may damage the light input window. Do not directly touch the light input window with bare hands. If dust or dirt gets on the window, wipe it gently using ethyl alcohol. · Do not drop this product or do not apply excessive shock to it. Related information http://www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Notice Technical information ∙ Infrared detectors / Technical information Information described in this material is current as of February, 2014. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KIRD1122E01 Feb. 2014 DN 5