Vishay HTRN25-1TS Thin film surface mount, dual-in-line resistor network Datasheet

HTRN
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, High Temperature (215 °C);
Thin Film Surface Mount, Dual-In-Line Resistor Network
FEATURES
•
•
•
•
•
•
•
•
•
•
HTRN series resistor networks feature four isolated resistors
with standard 50 mil pitch lead spacing. HTRN is ideal to be
used in oil/gas exploration industry, automotive under the
hood applications, and aerospace engine control high
temperature applications. The networks feature close TCR
tracking and tight ratio tolerance and are ideally suited for
unity gain operational amplifier circuitry. The standard
resistance offering listed are available for immediate
delivery.
R1
7
R2
1
6
R2
2
5
R1
3
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
STANDARD RESISTANCE OFFERING (R1/R2)
RATIO
R1
R2
100:1
100K
1K
50:1
50K
1K
25:1
25K
1K
20:1
20K
1K
10:1
10K
1K
5:1
10K
2K
2:1
10K
5K
4:1
4K
1K
Note
• Consult factory for additional values and schematics
SCHEMATIC
8
Ratio tolerance to ± 0.05 %
Ratio stability ± 0.1 %
- 55 °C to 215 °C operating temperature range
0.068" (1.73 mm) maximum seated height
Rugged molded case construction with no
internal solder
Low temperature coefficient (± 25 ppm/°C)
JEDEC MS-012 STD variation AA package
Gold terminations for durable attach bonds
Compliant to RoHS Directive 2002/95/EC
Halogen-free according to IEC 61249-2-21 definition
4
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 12-Dec-11
SPECIFICATIONS
Passivated nichrome
8
1000  to 100 k per resistor
± 25 ppm/°C
± 5 ppm/°C
0.1 %
0.05 %
100 mW
400 mW
R ± 0.5 %
R ± 0.1 %
0.1 ppm/V (typical)
100 V max. not to exceed P x R
- 55 °C to + 215 °C
- 55 °C to + 215 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 215 °C at 25 % rated power
2000 h at + 215 °C at 25 % rated power
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60111
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HTRN
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
Resistance
Value Code
C
F
HTRN
A
DIMENSION
E
B
xxxx
G
Date
Code
H
I
MILLIMETERS
A
0.157
3.99
B
0.0165 ± 0.0025
0.4 ± 0.06
C
0.050
1.27
D
0.195 max.
4.93
E
0.008 ± 0.001
0.20 ± 0.03
F
0.028 ± 0.001
0.71 ± 0.02
G
0.239 ± 0.005
6.07 ± 0.13
H
0.068 max.
1.73
I
0.008 ± 0.002
0.22 ± 0.06
Ø
2° to 6°
2° to 6°
ø
D
INCHES
Seating
Plane
Note
• Marking - Vishay symbol, part number from ordering information
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
Body
100
Percent of Rated Power
Resistive Element
Molded epoxy
Terminals
Copper
100 % = 0.40 W
75
50
25
0
Termination Finish
0
Plated Ni/Pd/Au
70
215
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: HTRN5-1UF
H
T
R
N
5
GLOBAL MODEL
(4 digits)
RESISTANCE
(3, 4 or 5 digits)
HTRN
2-1
4-1
5-1
10-1
20-1
25-1
50-1
100-1
-
1
U
F
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Revision: 12-Dec-11
Document Number: 60111
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages