Keysight N2810A-200 Infiniium z-series oscilloscope Datasheet

Keysight Technologies
Infiniium Z-Series Oscilloscopes
Data Sheet
Achieve new extremes
–– 63 GHz of real-time bandwidth on 1 or 2 channels
–– 33 GHz of real-time bandwidth on 2 or 4 channels
Introduction
Achieve new extremes
With the emergence of technologies pushing hundreds of Gb/s, an
oscilloscope must now have high bandwidth, low noise and fast
processing. That is the idea behind the Keysight Technologies,
Inc. Infiniium Z-Series oscilloscopes. They feature up to 63 GHz of
real-time oscilloscope bandwidth and the industry’s lowest noise
and jitter measurement floors.
Featuring
–– 63 GHz of real-time oscilloscope bandwidth
–– The industry’s only upgradable channel oscilloscope in a single
frame (from 2 to 4 channels)
–– The industry’s lowest noise and jitter measurement floor
–– The industry’s highest ENOB at bandwidths up to 63 GHz
–– The industry’s deepest memory (up to 2 Gpts)
DSAZ634A
DSOZ634A
DSAZ632A
DSOZ632A
DSAZ594A
DSOZ594A
DSAZ592A
DSOZ592A
DSAZ504A
DSOZ504A
DSAZ334A
DSOZ334A
DSAZ254A
DSOZ254A
DSAZ204A
DSOZ204A
The Infiniium Z-Series captures rise times
as fast as 5 ps (20/80).
Bandwidth
1 channel
2 channel
4 channel
Sample rate
1 channel 2 channel
63 GHz
63 GHz
33 GHz
160 GSa/s
160 GSa/s
63 GHz
33 GHz
—
160 GSa/s
80 GSa/s
59 GHz
59 GHz
33 GHz
160 GSa/s
160 GSa/s
59 GHz
33 GHz
—
160 GSa/s
80 GSa/s
50 GHz
50 GHz
33 GHz
160 GSa/s
160 GSa/s
33 GHz
33 GHz
33 GHz
80 GSa/s
80 GSa/s
25 GHz
25 GHz
25 GHz
80 GSa/s
80 GSa/s
20 GHz
20 GHz
20 GHz
80 GSa/s
80 GSa/s
Memory depth
4 channel Standard Maximum
100 Mpts
2 Gpts
80 GSa/s
50 Mpts
2 Gpts
100 Mpts
2 Gpts
—
50 Mpts
2 Gpts
100 Mpts
2 Gpts
80 GSa/s
50 Mpts
2 Gpts
100 Mpts
2 Gpts
—
50 Mpts
2 Gpts
100 Mpts
2 Gpts
80 GSa/s
50 Mpts
2 Gpts
100 Mpts
2 Gpts
80 GSa/s
50 Mpts
2 Gpts
100 Mpts
2 Gpts
80 GSa/s
50 Mpts
2 Gpts
100 Mpts
2 Gpts
80 GSa/s
50 Mpts
2 Gpts
03 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Table of Contents
Introduction���������������������������������������������������������������������������������������������������������������������������������������������������2
Advanced IC Design and Technology Help You Solve Your Biggest Problems��������������������������������������������4
The Oscilloscope — Digital Measurement and Analysis�������������������������������������������������������������������������������5
The Spectrum Analyzer — Radar and Satellite Communications Analysis��������������������������������������������������6
The Optical Modulation Analyzer������������������������������������������������������������������������������������������������������������������7
The Network Analyzer — Time-Domain Transmission (TDT)������������������������������������������������������������������������8
The World’s Fastest Probing System For Your Highest Performance Needs����������������������������������������������9
Achieve Your Real Edge������������������������������������������������������������������������������������������������������������������������������� 11
Achieve New Extremes�������������������������������������������������������������������������������������������������������������������������������� 12
Analysis Tools: PrecisionProbe Basic and Advanced (N2809A and N2807B)�������������������������������������������� 18
Analysis Tools: EZJIT, EZJIT Plus and SDA (Standard on DSA Models)���������������������������������������������������� 19
Analysis Tools: EZJIT Complete (Standard on DSA Models)����������������������������������������������������������������������20
Analysis Tools: InfiniiSim (N5465A)�������������������������������������������������������������������������������������������������������������21
Analysis Tools: Serial Data Equalization (N5461A)�������������������������������������������������������������������������������������22
Analysis Tools: InfiniiScan (N5414B)������������������������������������������������������������������������������������������������������������22
Analysis Tools: N8900A Infiniium Offline Oscilloscope Analysis Software������������������������������������������������23
Analysis Tools: User-Defined Function (N5430A)��������������������������������������������������������������������������������������� 24
Analysis Tools: Complete List of Analysis Software����������������������������������������������������������������������������������� 24
Compliance and Automated Testing�����������������������������������������������������������������������������������������������������������25
Compliance and Automation Testing: User-Defined Application (N5467B)����������������������������������������������26
Compliance and Automation Testing: Switch Matrix Support�������������������������������������������������������������������27
Compliance and Automation Testing: Other Options on Z-Series Oscilloscopes��������������������������������������28
Protocol Analysis�����������������������������������������������������������������������������������������������������������������������������������������29
Achieve New Extremes��������������������������������������������������������������������������������������������������������������������������������31
Specifications�����������������������������������������������������������������������������������������������������������������������������������������������34
Keysight Oscilloscopes�������������������������������������������������������������������������������������������������������������������������������� 42
Evolving Since 1939�������������������������������������������������������������������������������������������������������������������������������������44
04 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Advanced IC Design and Technology Help You Solve Your Biggest Problems
At the extremes of electrical and optical
measurements ...
You need to make rise time measurements without
being limited by scope bandwidth
The Z-Series is Keysight Technologies’ second generation of
enabling 63 GHz of oscilloscope bandwidth. RealEdge technology
is implemented using a unique combination of time interleaving,
frequency interleaving and proprietary signal processing.
You need to see your signal and not oscilloscope
noise
The Z-Series leverages technology from the award-winning
Infiniium 90000X and 90000Q Series oscilloscopes, which
provide leading signal integrity specifications. The Z-Series takes
advantage of leading-edge indium phosphide chip technology and
custom thin film packaging technology, which ultimately leads
to the lowest-noise-, real-time oscilloscope in the world. With
industry-leading bandwidths, Z-Series scopes let you see your
fastest signals as they really are.
RealEdge technology blocks enable 63-GHz real-time bandwidth.
You need fast analysis and hardware acceleration
The Z-Series has a capacitive touch screen, new processor
and 16 GB of RAM to ensure faster processing than previousgeneration Infiniium oscilloscopes.
Infiniium’s custom multi-chip modules feature indium phosphide chips
and Keysight proprietary packaging technology, enabling high bandwidth
and low noise.
05 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
The Oscilloscope — Digital Measurement and Analysis
With 63 GHz of bandwidth to capture rise
times as fast as 5 ps and recover clocks on
NRZ data rates as fast as 120 Gbit/s, the
Z-Series is the world’s fastest real-time
oscilloscope. Its four channels at 33 GHz
make it ideal for 32 Gb/s and greater
SERDES designs. In addition to providing
leading-edge bandwidth, the Z-Series
helps you to find your real edge, by
featuring the industry’s lowest noise and
jitter measurement floor, which means less
scope noise in your measurements and a
truer depiction of your signal.
Capture, display and measure multiple real-time eyes simultaneously with the Z-Series.
Z-Series features the following
to enable extreme digital
analysis
1.
2.
3.
4.
5.
Full offline analysis
Flexible user interface that supports
multiple displays and multi-touch
Two unique jitter separation
algorithms, including bounded uncorrelated jitter (BUJ) breakdown
Clock recovery on NRZ data rates
as fast as 120 Gb/s
Memory depth that captures
milliseconds of data at 160 GSa/s
With its flat frequency response and low noise, the Z-Series is able to accurately measure jitter
components such as ISI.
With the 63 GHz bandwidth, the Z-Series is able to effectively characterize the time interval error
trend of high speed signals as well as fast rising edges, down to 5 ps.
06 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
The Spectrum Analyzer — Radar and Satellite Communications Analysis
You need to easily compute both
magnitude and phase
Infiniium Z-Series oscilloscopes include
a Fast Fourier Transform (FFT) for
frequency domain (spectrum) analysis. The
integrated FFT offers an alternative to a
dedicated spectrum analyzer. Use the FFT
to compute both magnitude and phase
and take advantage of several useful
features to assist in spectral analysis.
The FFT can control span and resolution
bandwidth. Automatic measurements
and markers measure spectral peak
frequencies and magnitudes as well as
deltas between peaks. Use the amplitude
demodulation (envelope mode) to measure
rise and fall times on the entire envelope.
The Z-Series FFT quickly identifies peaks and has key controls such as span, start and stop, which
make the oscilloscope behave more like a spectrum analyzer.
Z-Series features the following
to enable extreme RealEdge
analysis
–– Multiple FFT windows including
Hanning, rectangular, BlackmanHarris, flattop, and Hamming
–– Peak search and navigation for fast
analysis
–– Amplitude modulation (envelope
mode) — create radar envelopes
–– FFT mask trigger
–– Gated FFT measurements
Ampltitude demodulation makes it possible to analyze difficult waveforms such as envelopes.
Use the FFT mask to test frequency margins and capture rare events.
07 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
The Optical Modulation Analyzer
Z-Series oscilloscopes are also available
in combination with the N4391A
optical modulation analyzer as a fully
specified turn-key instrument. This
compact solution offers the highest
bandwidth available on the market and
is the most advanced test solution for
advanced research on 400G and terabit
transmission. Even for the lower 20 GHz
bandwidth range, this compact and
easy-to-use solution is a reference system
for 100G transmission required by R&D
labs working at 100G and beyond. By
providing four channels of up to 63 GHz
bandwidth, the Z-Series saves you the
expense of a second instrument to analyze
dual polarization.
If you prefer to operate with your own
optical receivers but want to benefit from
the enormous analysis capability, you can
get the N4391A’s analysis software as a
standalone package.
Features and benefits
–– Up to 63 GHz true analog
bandwidth on four channels by time
synchronizing two 2-channel, 63 GHz
scopes
–– Up to 33 GHz true analog bandwidth
on four channels in one scope
–– Up to 120 Gbaud symbol rate analysis
–– Four times better EVM noise floor
than typical QPSK transmitter
–– Compact four channels in turn-key
solution
–– Up to four 160 GSa/s real-time
sampling for optimal phase tracking
–– Well-defined interface to include your
own MATLAB algorithms
–– Customer-configurable APSK and
OFDM decoders
The N4391A offers a powerful toolset to debug the most challenging errors, with tools proven by
thousands of RF engineers.
08 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
The Network Analyzer — Time-Domain Transmission (TDT)
You need to be able to maximize
your margins by removing the
effects of cables and fixtures
As bandwidths continue to increase and
cable loss becomes more and more of a
problem, the Z-Series has the technology
to solve this issue. The Z-Series
oscilloscopes offer award-winning
PrecisionProbe Advanced technology.
You no longer need to ignore cable
loss because you are short on time or
budget. Using PrecisionProbe Advanced
technology, you can characterize cables
as fast as 63 GHz and remove the loss
they create. PrecisionProbe Advanced
technology gives you one of the world’s
fastest edges at less than 5 ps and
uses this edge to perform a TDT on
your cable. Based on the loss of your
cable, PrecisionProbe Advanced then
compensates your measurement system,
gaining back valuable margin typically lost
in cables.
You need to test multiple lanes
automatically and still maximize
margins
The Z-Series features many compliance
applications, which provide full automation
of any switch connected to your system.
The software is fully compatible with
PrecisionProbe Advanced compensation,
which allows you to characterize every
input using only your Z-Series oscilloscope
and then seamlessly automate every
measurement in your compliance
application. Save valuable time and
resources in such technologies as
DisplayPort and PCI Express ® Gen3.
By analyzing cables you can increase your margins by removing insertion loss caused by cables.
09 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
The World’s Fastest Probing System For Your Highest Performance Needs
The InfiniiMax III and III+ probing system
provides the highest bandwidth and
incredibly low loading to allow for a
completely new level of signal fidelity
and accuracy. Eight different InfiniiMax
probe amplifiers ranging from 8 to 30
GHz are available for matching your
probing solution to your performance
and budget requirements. The InfiniiMax
III and III+ probe system is unmatched
by any product in the market. It uses a
proprietary 200 GHz transistor switching
speed indium phosphide IC process with
backside ground vias and novel thick-film
technology to accommodate your highestperformance needs.
Industry’s only upgradable probing system.
010 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
The World’s Fastest Probing System For Your Highest Performance Needs
(Continued)
Description
30-GHz InfiniiMax III probe amplifier
25-GHz InfiniiMax III probe amplifier
20-GHz InfiniiMax III probe amplifier
16-GHz InfiniiMax III probe amplifier
20-GHz InfiniiMax III+ probe amplifier
16-GHz InfiniiMax III+ probe amplifier
13-GHz InfiniiMax III+ probe amplifier
8-GHz InfiniiMax III+ probe amplifier
ZIF probe head
Browser (handheld) probe head
Solder-in probe head
PC board ZIF tip
3.5/2.92/SMA probe head
Performance verification fixture
Solder-in probe head
450-ohm ZIF tip kit (set of five)
200-ohm ZIF tip kit (set of five)
Browser tip replacement
Precision BNC adaptor
Sampling scope adaptor
2.92-mm flexible cable
High-impedance probe adaptor
35-GHz flexible cable
Probe or accessory
N2803A
N2802A
N2801A
N2800A
N7003A
N7002A
N7001A
N7001A
N5439A
N5445A
N5441A
N2838A
N5444A
N5443A
N2836A
N5440A
N5447A
N5476A
N5442A
N5477A
N5448B
N5449A
N2812B
Bandwidth
30 GHz
25 GHz
20 GHz
16 GHz
20 GHz
16 GHz
13 GHz
8 GHz
28 GHz
30 GHz
16 GHz
25 GHz
28 GHz
30 GHz
26 GHz
28 GHz
28 GHz
30 GHz
13 GHz
30 GHz
30 GHz
500 MHz
35 GHz
11 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Achieve Your Real Edge
Having the right amount of oscilloscope bandwidth ensures accurate measurements.
If you have too much bandwidth, oscilloscope noise becomes a contributor in your
measurement. With too little bandwidth, rise times are improperly depicted. Use
the chart below to find the correct oscilloscope bandwidth for the devices you are
measuring.
Recommended scope bandwidth
Technology
Ethernet 10BASE-T
Ethernet 100BASE-T
Ethernet 1000BASE-T
USB 2.0
USB 3.1 Gen 1
USB 3.1 Gen 2
DDR1
DDR2
DDR3
DDD4
GDDR5
SATA 3G
SATA 6G
SAS-2
SAS-3
16G FibreChannel
HDMI 1.4
DisplayPort 1.2
10G Ethernet
10Gbase-KR
XAUI
MIPI® M-PHY®
MIPI D-PHYSM
PCI Express 2
PCI Express 3
28/32G FibreChannel
Thunderbolt 3
SFP +
MHL
InfiniBand II
Data rate
10 Mbps
100 Mbps
250 Mbps x 4
480 Mbps
5 Gbps
10 Gbps
400 MT/s
1066 MT/s
2133 MT/s
3200 MT/s
8 Gbps
3 Gbps
6 Gbps
6 Gbps
12 Gbps
14.025 Gbps
3.4 Gbps
17.28 Gbps
10 Gbps
10.3125 Gbps
3.75 Gbps
5.83 Gbps
2.5 Gbps
5 Gbps
8 Gbps
28 Gbps
20.625 Gbps
10 Gbps
2.25 Gbps
2.5 Gbps, 5 Gbps
Fastest rise time
30 ns
3 ns
1.2 ns
300 ps
50 ps
25 ps
500 ps
250 ps
100 ps
75 ps
30 ps
67 ps
33 ps
42 ps
21 ps
24 ps
50 ps
50 ps
60 ps
24 ps
60 ps
17.2 ps
100 ps
30 ps
25 ps
18 ps
10 ps
34 ps
75 ps
75 ps
Scope BW
600 MHz
600 MHz
1 GHz
2.5 GHz
12 GHz
25 GHz
2 GHz
4 GHz
8 GHz
12 GHz
16 GHz
12 GHz
16 GHz
16 GHz
30 GHz
30 GHz
8 GHz
13 GHz
12 GHz
25 GHz
12 GHz
24 GHz
6 GHz
12.5 GHz
20 GHz
45 GHz
33 GHz
16 GHz
8 GHz
8 GHz
10 Gbps eye captured with 10 GHz of
bandwidth.
10 Gbps eye captured with 20 GHz of
bandwidth.
10 Gbps eye captured with 30 GHz of
bandwidth.
10 Gbps signal captured with 63 GHz of
bandwidth. Notice the faster rise time and
wider eye measurements.
12 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Achieve New Extremes
Introducing Infiniium Z-Series oscilloscopes
63 GHz of true analog bandwidth and
160 GSa/s on two channels.
See your signal more clearly with a large
15.4-inch capacitive touch-screen display.
16 GB RAM standard, quad core I5
processor and hardware acceleration
enable fast processing.
Remote access through Ethernet
10/100/1000BASE-T LAN interface with
Web-enabled connectivity uses ultraresponsive UltraVNC.
USB and LAN provide remote
measurements. Infiniium application
remote program interface (now a standard
feature) allows application/compliance
software automation.
Calibration edge with a rise time
of less than 15 ps enables TDT
calibration with PrecisionProbe. Use
the Infiniium calibration source as part
of PrecisionProbe Advanced to extend
calibration to an unmatched 63 GHz.
Threaded RF connectors ensure the most reliable signal integrity for high-performance instruments. The
AutoProbe II interface combines the tried-and-true 3.5-mm threaded RF connector of Keysight sampling
oscilloscopes with a convenient automatic torque mechanism that ensures a consistent 8 in. lbs. connection
without the hassles of a torque wrench.
13 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
100-MHz reference clock ties up to 10
Z-Series together with 150 fs precision.
A 10-MHz clock allows tying multiple
instruments together with the Z-Series.
Live indicator shows when the scope is
running a long operation.
Measure section, including a toggling
marker button and a dedicated marker
knob, provides quick access to your
marker control.
Individual vertical knobs per channel.
The horizontal and vertical knobs can
be changed to control functions and
waveform memories. Simply right click
the channel control in the GUI to change
these controls.
The Z-Series improves upon Keysight’s use of custom integrated circuits and multichip module packaging
with an exclusive technology called RealEdge. RealEdge comprises a combination of new architectures, nextgeneration microcircuits and thin-film components, and advanced application of Keysight’s indium phosphide
semiconductor process. This technology enables high-frequency capability while maintaining the industry’s
lowest noise and jitter measurement floor (75 fs).
14 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Achieve New Extremes (Continued)
Infiniium User Interface
Easy-to-use FFTs.
Amplitude demodulation.
Protocol decode.
15 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
The Infiniium user interface
features:
–– Full offline viewer
–– Up to 4 grids
–– Up to 16 functions
–– Up to 16 horizontal gates
–– Up to 9 jitter analysis charts
–– Up to 9 noise analysis charts
–– Up to 4 InfiniiSim charts
–– Up to 16 FFTs at once
–– Up to 16 grids in each window
–– Peak annotation
–– Composite files for easy file sharing
–– On-screen marker measurements
–– Up to 20 measurements displayed at
once
–– Multiple display support
–– Drag and drop measurements
–– My Infiniium menu customization
–– Up to 16 user-defined functions
–– Full spectral window
–– Spectral analysis controls
–– Quick save
–– Multi-touch for touch capacitive screen
–– Function overviews/window
–– Up to 16 measurement trends
–– Up to 16 histograms
–– Nearly unlimited real-time eyes
–– Tail fit versus spectral analysis chart
–– Hardware acceleration
–– Plus much more
Up to 16 horizontal gates.
Jitter algorithm verifying window.
16 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Achieve New Extremes (Continued)
Low noise and jitter
The Z-Series features the industry’s lowest
noise and jitter measurement floors,
allowing you to truly see your signal and
get your device to market faster.
PrecisionProbe
By characterizing and compensating for
loss in cables, you can gain significant
margin. PrecisionProbe makes using
switches easy in your test setup.
Waveform transformation
Debugging next-generation buses such
as PCI Express and Thunderbolt require
advanced analysis tools. Keysight’s
InfiniiSim software helps you model the
most difficult situations.
Infiniium Z-Series oscilloscopes are the world’s only 4-channel, 33-GHz real-time
oscilloscopes. Z-Series scopes are the only oscilloscopes that feature 30-GHz probes,
making debugging your system easier and ensuring you aren’t missing valuable harmonic
content.
17 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Compliance software
Keysight’s compliance software
packages are certified by experts
and provide assurance that when you
pass in-house, you will pass at your
customer site as well.
Protocol analysis
Infiniium protocol tools simplify
debugging your design. Infiniium
scopes offer full protocol analysis
for PCI Express Gen 1, 2, and 3. The
128b/130b decoding features a lister
that makes alignment between the
lister and analog channels simple.
Advanced jitter and noise
separation
Z-Series oscilloscopes features application-specific software that allows you to gain
the insight into your design that you need. Whether you are solving tough jitter or noise
problems, removing loss due to cables or probes, or simply looking at protocol, the
Z-Series has the tools to help you ensure you realize your best design.
Infiniium’s new noise analysis tools
allow you to analyze your data bus
completely.
18 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: PrecisionProbe Basic and Advanced (N2809A and N2807B)
Turn your Z-Series oscilloscope
into a time-domain
transmissometry (TDT). Quickly
characterize and compensate
any input into your scope.
Now every probe and cable in the system can have the exact same response — probe to
probe or cable to cable — without the inaccuracies that using one model can produce.
You can properly characterize custom probes and remove unwanted responses. In
addition to characterizing the cables, PrecisionProbe allows for immediate use on the
same instrument. PrecisionProbe saves you time and money while increasing your
measurement accuracy.
PrecisionProbe technology turns
your oscilloscope into the ultimate
characterization tool. Not only can you
do the normal waveform transformations
such as de-embedding through
InfiniiSim, PrecisionProbe allows quick
characterization of your entire probe
system (including cables and switches)
without the need for extra equipment.
PrecisionProbe takes advantage of the fast
“cal output” signal built into the Z-Series
to characterize and compensate insertion
loss on the measurement system.
When you combine InfiniiMax probes with switches between the amplifier and the probe
head, PrecisionProbe allows for full correction and automation of each probe’s path.
Full automation is then available to allow for quick swapping of the inputs via Infiniium’s
compliance framework. For increased accuracy, purchase PrecisionProbe Advanced for
faster edge speeds and true differential measurements.
PrecisionProbe technology:
–– Properly creates custom probe
transfer function = VOut/VIn
–– Properly characterizes probed
system transfer function such that
VOut/VIn = VOut/VSrc
–– Removes unwanted S21 cable loss
Every Z-Series oscilloscope has Keysight’s
custom indium phosphide (InP) fast edge.
PCI Express measurement comparisons
Root complex device
Eye height (mV)
2.5 GT/s 12 GHz
517.19
5 GT/s_12 GHz_3.5 dB
312.22
5 GT/s_12 GHz_6 dB
341.1
5 GT/s_16 GHz_3.5 dB
306.6
5 GT/s_16 GHz_6 dB
344.4
8 GT/s_12 GHz_P7
96.83
8 GT/s_12 GHz_P8
100.16
8 GT/s_16 GHz_P7
96.92
8 GT/s_16 GHz_P8
100.24
Eye height PrecisionProbe
553.94
348.19
376
348.33
374.41
103.09
108.33
106.01
108.24
Gain (%)
7.1
11.5
10.2
13.6
8.7
6.5
8.2
9.4
8.0
By characterizing and compensating for cable loss on the cable connected to the PCI
Express test fixture, the designer was able to gain between 6.5 and 13.6% margin that
would have been lost otherwise.
19 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: EZJIT, EZJIT Plus and SDA (Standard on DSA Models)
Gain insight into the causes of signal jitter to ensure high reliability of your design
With faster edge speeds and shrinking margins in today’s
high-speed digital designs, insight into the causes of jitter has
become critical for success. Using EZJIT and EZJIT Plus jitter
analysis software the Z-Series oscilloscopes help you identify and
quantify jitter margins that affect the reliability of your design.
Time correlation of jitter to the real-time signal makes it easy to
trace jitter components to their sources. Additional compliance
views and a measurement setup wizard simplify and automate
RJ/DJ separation for testing against industry standards.
EZJIT Plus automatically detects embedded clock frequencies
and repetitive data patterns on the oscilloscope inputs and
calculates the level of data-dependent jitter (DDJ) that is
contributed to the total jitter (TJ) PDF by each transition in
the pattern, a feature not available on any other real-time
oscilloscope today.
Use EZJIT software to extract spread spectrum clocks.
Measurement trends and jitter spectrum
EZJIT’s simple tools help you quickly analyze the causes of jitter.
Measurement trends allow you to see deeper views of factors
affecting measurements. Jitter spectrum is a fast method to find
the causes of jitter.
Two ways to separate jitter
EZJIT Plus comes with two ways to separate jitter: the spectral
method and the emerging tail fit method. Both methods allow
for simple separation of RJ and DJ, but the tail fit method
provides proper jitter separation in the unique case of bounded
uncorrelated jitter.
Unique RJ/DJ threshold view
Determine which algorithm fits your data best.
EZJIT Plus also provides a unique threshold view of the jitter
spectrum with the threshold drawn on the chart. The spectral
view provides insight into the decision point of the separation and
works with both narrow and wide spectral separation.
Real-time eye and clock recovery
Serial data analysis (SDA) software provides flexible clock
recovery including 1st and 2nd-order PLL and constant
algorithms. With a stable clock, you can look at real-time eyes
of transition and non-transition bits. Z-Series scopes with SDA
software also provide a new unique view of bits preceding an eye.
Flexible charts
EZJIT Plus displays up to 10 graphs with unique information. Use
them all to maximize your jitter analysis.
Jitter separation makes debugging your device easy.
20 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: EZJIT Complete (Standard on DSA Models)
Discover signal anomalies to the noise of the waveform
Noise analysis with EZJIT Complete software for insight into the sources of noise in the signal.
More than your standard jitter package
Key measurements
To efficiently determine root cause for any type of signal
degradation in the amplitude domain, you must first determine
whether the problem is caused by random or deterministic
sources. To help you accomplish this task, EZJIT Complete takes
analysis techniques used in the time domain (jitter analysis) and
extends them into the amplitude domain.
With EZJIT Complete, Z-Series scopes offer the following unique
measurements:
More than just an eye contour
EZJIT Complete is an in-depth view into impairments related to
signal levels – either logic ones or logic zeroes – deviating from
their ideal positions. Some tools simply provide a view of an eye
contour, but provide no real measurement data other than nice
graphics.
EZJIT Complete uses separation techniques to allow each bit to
be examined to determine correlated effects and to make multiple
measurements on individual bits to determine uncorrelated
effects. Use FFTs to analyze the frequency domain and extract
random components. Dual-Dirac modeling techniques are also
carried from the jitter domain and used in the interference
domain.
–– Total interference (TI)
–– Deterministic interference (DI)
–– Random noise (RN)
–– Periodic interference (PI)
–– Inter-symbol interference (ISI)
–– RIN (dBm or dB/Hz)
–– Q-factor
21 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: InfiniiSim (N5465A)
The most advanced waveform transformation software helps you render waveforms anywhere in a
digital serial data link
InfiniiSim waveform transformation toolset provides the most flexible and accurate means to render waveforms anywhere in a digital
serial data link. The highly configurable system modeling enables you to remove the deleterious effects of unwanted channel elements,
simulate waveforms with channel models inserted, view waveforms in physically improbable locations, compensate for loading of
probes and other circuit elements, and do so simply and quickly on your tool of choice, the Z-Series at up to 63 GHz of bandwidth.
Circuit models to define your
setup
The InfiniiSim waveform transformation
toolset provides a graphical user interface
for you to define your system as you
understand it and even make it arbitrarily
complex. You do this by selecting
topologies and defining circuit blocks.
Model reflections
With the InfiniiSim waveform
transformation toolset, you can transform
signals with confidence, whether you are
inserting or removing channel elements
or relocating the measurement plane.
InfiniiSim’s advanced toolset lets you
model up to 27 different elements at
once and model the interaction between
elements. Only toolsets with the ability
to model more than one element will
properly reflect a model including the
oscilloscope’s input. The Z-Series scopes
provide their own S11 parameter to allow
modeling of their own input.
InfiniiSim renders the waveform through hardware acceleration.
Model your system with as much
detail as you need
InfiniiSim features the model setup that
best matches your design. Whether it
is a simple single-element model or an
advanced general-purpose model with
up to 27 elements in the link, you can
perfectly model your design and simulate
the exact probing point you want.
InfiniiSim allows embedding and de-embedding of up to 27 different elements or S-parameter
models at once to meet your most demanding requirements.
22 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: Serial Data Equalization (N5461A)
Significantly reduce receiver
errors by opening even tightly
shut eyes through equalization
emulation
Serial data equalization for the Z-Series
provides fast and accurate equalization
using decision feedback equalization
(DFE), feed-forward equalization (FFE),
and continuous-time linear equalization
(CTLE) modeling in real-time. Serial data
equalization software allows you to input
your own self-designated tap values
to verify your design. If you prefer, the
software will find the optimal tap values
for you. CTLE allows DC gain and two-pole
modeling.
Analysis Tools: InfiniiScan
(N5414B)
Trigger on events that hardware
triggers can’t handle
InfiniiScan software allows you to use an
oscilloscope to identify signal integrity
issues that hardware triggering is unable
to find in your electronic designs. This
innovative software scans through
thousands of acquired waveforms
per second to help you isolate signal
anomalies, saving you time and improving
designs.
Innovative triggers
The zone qualify finder allows you to draw
a “must intersect” or “must not intersect”
zone on the oscilloscope screen to visually
determine the event identify condition. If
you can see the event of interest on the
screen, you can create a trigger that will
isolate it, saving significant time over some
complicated hardware triggers.
Other triggers include non-monotonic
edge, measurement limit search, runt and
pulse width.
Draw zones on your screen for a unique triggering experience.
23 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: N8900A Infiniium Offline Oscilloscope Analysis Software
View and analyze away from your oscilloscope and target system
Ever wish you could do additional signal viewing and analysis
away from your scope and target system? Now you can. Capture
waveforms on your scope, save to a file, and recall into Keysight’s
Infiniium Offline application.
View and analyze anywhere your PC goes
Take advantage of large high-resolution and multiple displays
found in your office. Use familiar scope controls to quickly
navigate and zoom in to any event of interest. Use auto
measurements and functions for additional insight.
Share scope measurements more easily across
your team
You can share entire data records instead of being limited
exclusively to static screen shots.
Infiniium Offline software works with all of Infiniium’s applications.
Create more useful documentation
Use features such as right-click cut-and-paste to move screen
images between applications, without ever having to save the
image to a file. Add up to 100 bookmark annotations and up to 20
simultaneous measurements.
Need advanced analysis capability?
Infiniium Offline includes a variety of upgrade options including
serial decode upgrades for a variety of serial buses, jitter analysis,
and serial data analysis.
Use Infiniium Offline to find signal anomalies, such as power supply
coupling.
Peak search capability makes Infiniium Offline a frequency domain tool.
24 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Analysis Tools: User-Defined Function (N5430A)
Combine Infiniium and MATLAB for even more
analysis
Enhance the Z-Series with a seamless gateway to powerful
MATLAB analysis functionality. User-defined function software
adds new analysis capabilities to the Z-Series, beyond traditional
math/analysis features. Now you have the freedom to develop
your own math functions or filters using MATLAB and its Signal
Processing Toolbox. With a seamless integration to MATLAB,
Infiniium oscilloscopes allow you to display your math and analysis
functions live on the oscilloscope screen, just like any other
scope’s standard functions.
Analysis Tools: Complete List of Analysis Software
Description
EZJIT Complete jitter analysis
EZJIT Plus jitter analysis
EZJIT jitter analysis
Frequency domain analysis
High-speed SDA and clock recovery
InfiniiScan software triggering
InfiniiSim advanced signal de-embedding
InfiniiSim basic signal de-embedding
MATLAB - Basic digital analysis
MATLAB - Standard digital analysis
MultiScope software - combines two scopes 1
MultiScope software - combines up to five scopes 1
MultiScope software - combines up to ten scopes 1
Pulse Amplitude Modulation (PAM-4) analysis
PrecisionProbe calibration 2
Serial data equalization
User-defined function
License type
Fixed
Factory-installed on
new scope purchase or
user-installed on existing
scope
N8823A-1FP
N5400A-1FP
E2681A-1FP
N8832A-001
E2688A-1FP
N5414B-1FP
N5465A-1FP
N5465A-3FP
N8831A-001
N8831A-002
—
—
—
N8827A-1FP
N2809A-1FP
N5461A-1FP
N5430A-1FP
Floating
User-installed
transportable license
Server-based license
N8823A-1TP
N5400A-1TP
E2681A-1TP
—
E2688A-1TP
N5414B-1TP
N5465A-1TP
N5465A-3TP
—
—
N8834A-ATP
N8834A-BTP
N8834A-CTP
N8827A-1TP
N2809A-1TP
N5461A-1TP
N5430A-1TP
N5435A-067
N5435A-001
N5435A-002
—
N5435A-003
N5435A-004
N5435A-027
N5435A-026
—
—
N5435A-085
N5435A-086
N5435A-090
N5435A-077
N5435A-044
N5435A-025
N5435A-005
1. Supports any combination of Infiniium oscilloscope models with software 5.50 and above.
2. Compliance software is not supported on DSAZ632A, DSOZ632A, DSAZ592A and DSOZ592A scope models.
25 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Compliance and Automated Testing
Today’s demanding environment means you have much less
time to understand the intricacies of the technologies you are
testing. You also have less time to develop and test automation
software that is designed to increase measurement throughput
and decrease time to market. Compliance applications save you
time and money with measurement automation built into the
compliance application. No longer do valuable resources need to
be exclusively tied to writing automation software. Instead they
can be deployed to designing the next big project.
Infiniium’s compliance applications are fully functional with
design tools such as ADS. Imagine running your waveforms at
design through the entire suite of compliance tests, giving more
insight earlier than was previously possible. As the design moves
to silicon and then to validation, the same suite of tests can be
run live on your device.
Compliance applications make testing to today’s technologies standards
easy.
Compliance applications that run on Z-Series oscilloscopes are
certified to test to the exact specifications of each technology
standard. If a test passes on the Z-Series scope in your lab, you
can be assured that it will pass in test labs and at plug fests
worldwide. Keysight experts on technology boards and industry
standards committees help define compliance requirements. As
a result, you can be sure that Z-Series oscilloscope tools deliver
to critical specifications. Setup wizards combined with intelligent
test filtering give you confidence you’re running the right tests.
Comprehensive HTML reports with visual documentation and
pass/fail results guarantee that critical information is retained on
each test.
Quick and easy automated switching
Only Keysight’s Z-Series oscilloscopes feature compliance
applications with both the user-defined application’s add-in
capability and integrated PrecisionProbe compensation. Switch
paths can vary in their characteristics and have unwanted loss. By
enabling PrecisionProbe in its compliance applications, Z-Series
scopes allows you to characterize and compensate for every path
in the switch, making every path’s frequency response identical in
both magnitude and phase. These tools makes switch automation
quick and painless. The Z-Series and its compliance applications
make automation more automated than ever. Your technicians
no longer need to spend valuable time physically changing
connections.
The remote programming interface makes it easy to control automation
applications via your PC.
PrecisionProbe is fully integrated in Z-Series automation applications.
26 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Compliance and Automation Testing: User-Defined Application (N5467B)
Custom automation for your
Z-Series oscilloscope
The user-defined application is the
only fully customizable automated
environment made for an oscilloscope by
an oscilloscope designer. It provides full
automation, including the ability to control
other Keysight instruments, external
applications such as MATLAB and your
DUT software.
Simplify your automation
The user-defined application (UDA) makes
automation simple. The application takes
the Infiniium compliance application
framework and gives you full access to
its interface. UDA allows for automation
testing in as little as one minute. Use UDA
to control other Keysight instruments
such as signal generators and network
analyzers to create a full suite of
measurements.
Full measurement report
Customize your own tests and requirements with user-defined application in the familiar Keysight
framework.
No automation would be complete without
a simple-to-view and easy-to-understand
report. UDA provides a full report of the
pass/fail criteria you have provided.
Add-in capability
Ever wanted to add testing to your
compliance applications? All Infiniium
compliance applications support the
industry’s most flexible testing mechanism
with UDA add-in capability. Create the
custom testing you need and then plug
it into your compliance application to
expand the application to your testing
needs. UDA add-in capability is available
only on Infiniium oscilloscopes.
PrecisionProbe and switch
compatibility
UDA makes automation of switches in
your system simple and accurate. Use
PrecisionProbe to characterize the path of
the switch and then let UDA’s unique GUI
switch between every input in your switch
system. Every input can look identical
in its frequency response thanks to this
advanced technology.
Add a switch when testing your multi-lane signals to automate tedious test requirements.
27 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Compliance and Automation Testing: Switch Matrix Support
Comprehensive testing, easily achieved
Eliminate reconnections (reducing errors)
Compliance applications on the Z-Series support a switch
matrix, making testing simple by automating tests for each lane
of a multi-lane bus. Typical testing requires reconnecting the
oscilloscope each time you switch a lane, which causes wasted
time and inaccuracies. The Z-Series solves this problem by
supporting switch matrix through its compliance test. Simply
connect the switch to the oscilloscope and all the lanes, and then
click Run to complete full testing of your entire device.
Maintain accuracy
The framework fully supports Keysight’s PrecisionProbe software
(N2809A) and InfiniiSim software (N5465A). This gives you the
ability to characterize every switch path to the device under test
(both magnitude and skew) and ensure that all of them maintain
the same level of accuracy.
Customize your testing
Use the remote programming interface (standard feature on the
Z-Series) and N5467A user-defined application for device control,
instrument control and test customization.
Software description
DisplayPort switch
matrix
HDMI switch matrix
MIPI D-PHY switch
matrix
MIPI M-PHY switch
matrix
PCIe® switch matrix
Ethernet KR switch
matrix
QSFP+ switch matrix
UDA switch matrix
100GBASE-CR10
switch matrix
100GBASE-KR4 switch
matrix
100GBASE-CR4 switch
matrix
10GBASE-T switch
matrix
1.
Model number
Floating 2
Fixed 1
Node locked Transportable Server based
U7232C-7FP U7232C-7TP N5435A-701
N5399C-7FP
U7238C-7FP
N5399C-7TP
U7238C-7TP
N5435A-702
N5435A-703
U7249C-7FP
U7249C-7TP
N5435A-704
N5393F-7FP
N8814B-7FP
N5393F-7TP
N8814B-7TP
N5435A-705
N5435A-706
N6468A-7FP
N5467B-7FP
N8828A-7FP
N6468A-7TP
N5467B-7TP
N8828A-7TP
N5435A-707
N5435A-708
N5435A-709
N8829A-7FP
N5435A-710
N8829A-7TP
N8830A-7FP
N8830A-7TP
N5430A-711
N5392A-7FP
N5392A-7TP
N5430A-712
Factory-installed on new scope purchase or user-installed on existing
scope.
2. Must be user-installed.
DUT
Clock
SMA
probe
head
Ch1
L1
SMA
probe
head
Ch2
L2
SMA
probe
head
Ch3
L3
SMA
probe
head
Ch4
Switch matrix
Scope
+3.3V
Typical switch configuration for HDMI testing (now supported in the
Z-Series).
Skews between switch paths are easily maintained with Keysight’s
unique software.
28 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Compliance and Automation Testing: Other Options on Z-Series Oscilloscopes
In the previous pages we have highlighted a few of the key technologies that benefit from the industry’s only four-channel oscilloscope
with more than 20 GHz bandwidth. The Z-Series offers over 20 compliance applications and the list continues to grow. All applications
are fully compatible with InfiniiSim, PrecisionProbe and UDA’s unique add-in capability.
Compliance test and validation software 1
Description
BroadR-Reach
DDR1 and LPDDR1
DDR2 and LPDDR2
DDR3 and LPDDR3
DDR4 and LPDDR4
DisplayPort 1.2
eDP 1.4
eMMC
Ethernet + EEE 10/100/1000BASE-T
Ethernet 10GBASE-T
Ethernet 10GBASE-KR
Ethernet 100GBASE-CR10
Ethernet 100GBASE-CR4
Ethernet 100GBASE-KR4
GDDR5
HDMI 2.0
MHL 3.0
MIPI D-PHY
MIPI M-PHY
MOST
PCI Express Gen4
SAS-3
SATA Gen 3
SFP+
USB 2.0
USB 3.1
USB HSIC
UHS-I
UHS-II
User-defined application
Thunderbolt
XAUI
1.
License type
Fixed
Factory-installed on new
scope purchase or userinstalled on existing scope
N6467A-1FP
U7233A-1FP
N5413B-1FP
U7231B-1FP
N6462A-1FP
U7232C-1FP
N6469A-1FP
N6465A-1FP
N5392B-1FP
U7236A-1FP
N8814B-1FP
N8828A-1FP
N8830A-1FP
N8829A-1FP
U7245A-1FP
N5399C-1FP
N6460B-1FP
U7238C-1FP
U7249C-1FP
N6466A-1FP
N5393F-1FP
N5412D-1FP
N5411B-1FP
N6468A-1FP
N5416A-1FP
U7243B-1FP
U7248A-1FP
U7246A-1FP
N6461A-1FP
N5467B-1FP
N6463B-1FP
N5431A-1FP
Floating
User-installed transportable
license
Server-based license
N6467A-1TP
U7233A-1TP
N5413B-1TP
U7231B-1TP
N6462A-1TP
U7232C-1TP
N6469A-1TP
N6465A-1TP
N5392B-1TP
U7236A-1TP
N8814B-1TP
N8828A-1FP
N8830A-1FP
N8829A-1FP
U7245A-1TP
N5399C-1TP
N6460B-1TP
U7238C-1TP
U7249C-1TP
N6466A-1TP
N5393F-1TP
N5412D-1TP
N5411B-1TP
N6468A-1TP
N5416A-1TP
U7243B-1TP
U7248A-1TP
U7246A-1TP
N6461A-1TP
N5467B-1TP
N6463B-1TP
N5431A-1TP
N5435A-062
N5435A-021
N5435A-037
N5435A-053
N5435A-056
N5435A-041
N5435A-083
N5435A-061
N5435A-060
N5435A-023
N5435A-059
N5435A-078
N5435A-080
N5435A-079
—
N5435A-070
N5435A-078
N5435A-022
N5435A-043
N5435A-068
N5435A-112
N5435A-073
N5435A-028
N5435A-074
N5435A-017
N5435A-075
N5435A-042
—
N5435A-052
N5435A-058
N5435A-057
N5435A-018
Compliance software is not supported on DSAZ632A, DSOZ632A, DSAZ592A and DSOZ592A scope models.
29 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Protocol Analysis
Z-Series oscilloscopes come with more
than 15 protocol decoders, including
the industry’s only 64/66 b decoder. The
Z-Series protocol tools feature timecorrelated markers that let you easily
move between the listing window and the
waveform. Protocol tools can be used on
up to four lanes simultaneously.
These unique tools feature search and
trigger capability that lets you scan
through the waveform to find the trigger
condition that interests you. Protocol tools
are fully compatible with Infiniium’s serial
data analysis and are available on the
Infiniium offline tool.
Z-Series decoding the PCI Express Gen 3 packets.
30 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Protocol Analysis (Continued)
Protocol decode software
Optional application description
Protocol
8b/10b (generic)
64b/66b (10GBASE-KR)
CAN/LIN/FlexRay/CAN-FD
I2S protocol triggering and decode
I²C/SPI 2
JTAG 2
MIPI CSI-3
MIPI DigRF® v4
MIPI D-PHY 2
MIPI LLI
MIPI RFFE
MIPI UFS
MIPI UniPro
SPMI protocol trigger and decode
PCIe 1 and 2
PCIe 3
Generic Raw – NRZ protocol decode
Generic Raw – PAM-4 protocol decode
RS-232/UART
SATA
SSIC
SVID 2
USB 2.0
USB 3.0
License type
Fixed
Factory-installed on new
scope purchase or userinstalled on existing scope
Floating
User-installed transportable
license
Server-based license
(N5435A option)
—1
N8815A-1FP
N8803C-1FP
N8811A-1FP
N5391A-1FP
N8817A-1FP
N8820A-1FP
N8807A-1FP
N8802A-1FP
N8809A-1FP
N8824A-1FP
N8818A-1FP
N8808A-1FP
N8845A-1FP
N5463A-1FP
N8816A-1FP
—1
—3
N5462A-1FP
N8801A-1FP
N8819A-1FP
N8812A-1FP
N5464A-1FP
N8805A-1FP
—1
N8815A-1TP
N8803C-1TP
N8811A-1TP
N5391A-1TP
N8817A-1TP
N8820A-1TP
N8807A-1TP
N8802A-1TP
N8809A-1TP
N8824A-1TP
N8818A-1TP
N8808A-1TP
N8845A-2FP
N5463A-1TP
N8816A-1TP
—1
—3
N5462A-1TP
N8801A-1TP
N8819A-1TP
N8812A-1TP
N5464A-1TP
N8805A-1TP
—1
N5435A-045
N5435A-103
105
N5435A-006
N5435A-038
N5435A-065
N5435A-047
N5435A-036
N5435A-049
N5435A-072
N5435A-063
N5435A-048
N5435A-114
N5435A-032
N5435A-046
—1
—3
N5435A-031
N5435A-035
N5435A-064
N5435A-054
N5435A-034
N5435A-071
1. Standard on DSA models or with high-speed SDA option.
2. Compliance software is not supported on DSAZ632A, DSOZ632A, DSAZ592A, and DSOZ592A scope models.
3. Requires PAM-4 compliance app and SDA option (firmware 6.0 and up).
31 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Achieve New Extremes
Configure your high-performance real-time oscilloscope solution today
Get the most out of your oscilloscope investment by choosing options and software to speed your most common tasks. Use option
numbers when ordering at time of purchase. Use model numbers to add to an existing scope.
1. Choose your oscilloscope
Oscilloscope
DSOZ634A
DSAZ634A
DSOZ632A
DSAZ632A
DSOZ594A
DSAZ594A
DSOZ592A
DSAZ592A
DSOZ504A
DSAZ504A
DSOZ334A
DSAZ334A
DSOZ254A
DSAZ254A
DSOZ204A
DSAZ204A
1.
Description
63-GHz digital storage oscilloscope
63-GHz digital signal analyzer 1
63-GHz digital storage oscilloscope
63-GHz digital signal analyzer 1
59-GHz digital storage oscilloscope
59-GHz digital signal analyzer 1
59-GHz digital storage oscilloscope
59-GHz digital signal analyzer 1
50-GHz digital storage oscilloscope
50-GHz digital signal analyzer 1
33-GHz digital storage oscilloscope
33-GHz digital signal analyzer 1
25-GHz digital storage oscilloscope
25-GHz digital signal analyzer 1
20-GHz digital storage oscilloscope
20-GHz digital signal analyzer 1
DSA models come standard with 100 Mpts memory, EZJIT Complete and Serial Data Analysis software.
All models come with a front cover, power cord, keyboard, mouse, 3.5 mm male-to-male calibration cable (54916-61626), 3.5 mm
(male) to 2.4 mm (male) calibration cable (54932-61630), ESD strap, and (5) 3.5 mm female-to-female coax adapters (5061-5311).
50, 59, and 63 GHz models come with (2) additional 1.85 female-to-female adapters (54932-68712).
All models come standard with removable SSD hard drive.
Memory options
Memory per scope channel
100 Mpts/ch memory
200 Mpts/ch memory
500 Mpts/ch memory
1 Gpt/ch memory
2 Gpts/ch memory
Description
ANSI Z540 compliant calibration
ISO17025 calibration
Performance verification de-skew fixture for InfiniiMax III probe
Rack mount kit option
Transit case
Removable SSD with Windows 7 for Z-Series - 1 TB
Removable SSD with Windows 7 for Z-Series - 500 GB 3
Optional synchronization port for 20, 25, 33 GHz models
2. Standard on DSA models.
3. 500G SSD standard on all models.
Options (on new oscilloscope)
DSOZ000-100 2
DSOZ000-200
DSOZ000-500
DSOZ000-01G
DSOZ000-02G
Options
DSOZ000-A6J
DSOZ000-1A7
—
—
—
DSOZ000-801
—
DSOZ000-601
Model number
—
—
N5443A
N2759A
N2748A
N2110A-01T
N2110A-500
—
32 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Achieve New Extremes (Continued)
Configure your high-performance real-time oscilloscope solution today
2. Choose your probes and accessories
Probe amplifier
Description
30 GHz InfiniiMax III probe amplifier
25 GHz InfiniiMax III probe amplifier
20 GHz InfiniiMax III probe amplifier
16 GHz InfiniiMax III probe amplifier
20 GHz InfiniiMax III+ probe amplifier 1
16 GHz InfiniiMax III+ probe amplifier 1
13 GHz InfiniiMax III+ probe amplifier 1
8 GHz InfiniiMax III+ probe amplifier 1
Model number
N2803A
N2802A
N2801A
N2800A
N7003A
N7002A
N7001A
N7001A
Probe head
Description
16 GHz QuickTip probe head 2
QuickTip probe tip (set of 4) 2
16 GHz solder-in probe head
26 GHz solder-in probe head 2
28 GHz Zero Insertion Force (ZIF) probe head
200 Ω ZIF tip for high sensitivity 3
25 GHz PC board ZIF tip (for normal sensitivity)
30 GHz browser probe head
Browser tip replacement (set of 4)
28 GHz 3.5 mm/2.92 mm/SMA probe head 2
Model number
N2848A
N2849A
N5441A
N2836A
N5439A
N5447A
N2838A
N5445A
N5476A
N5444A
Probe adapter
Description
30 GHz voltage termination adapter (50 Ω — 3.5 mm (f) to (m) connector)
Performance verification and deskew fixture
Precision BNC adapter (50 Ω — 3.5 mm (f) to precision BNC (f) connector)
Sampling scope adapter (50 Ω — 3.5 mm (f) to (m) connector)
High-impedance probe adapter (includes one N2873A passive probe)
Model number
N7010A
N5443A
N5442A
N5477A
N5449A
For more information about Infiniium Oscilloscope Probes and Accessories - Data Sheet, view the Keysight publication number
5968-7141EN.
For more information about InfiniiMax III/III+ Probing System - Data Sheet, view the Keysight publication number 5990-5653EN.
1. With InfiniiMode technology, allowing you to switch to differential, single-ended, and common mode without adjusting probe tip connections.
2. Probe head that supports InfiniiMode connections.
3. Compatible only with InfiniiMax III probe amplifier.
33 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Achieve New Extremes (Continued)
3. Upgrade your oscilloscope
Model numbers
N2764BU-025
N2764BU-033
N2764BU-050
N2764BU-059
N2764BU-062
N2764BU-162
Description
Upgrades within the Z-Series family
Bandwidth upgrade from 20 to 25 GHz
Bandwidth upgrade from 25 to 33 GHz
Bandwidth upgrade from 33 to 50 GHz
Bandwidth upgrade from 50 to 59 GHz
Bandwidth upgrade from 50 to 63 GHz
Bandwidth upgrade from 59 to 63 GHz
Note: All except 50 to 59 GHz and 50 to 63 GHz upgrades require return to Service Center but do not include Service Center costs. Calibration incurs additional charges.
Model number to
upgrade
N2810A-100
N2810A-200
N2810A-500
N2810A-01G
N2810A-02G
Memory per scope channel existing oscilloscope (post-sale)
Upgrade from 50 to 100 Mpts/channel
Upgrade from 100 to 200 Mpts/channel
Upgrade from 200 to 500 Mpts/channel
Upgrade from 500 Mpts to 1 Gpts/channel
Upgrade from 1 to 2 Gpts/channel
Number of channels
Model numbers
N2128A
Description
Upgrades within the Z-Series family
Number of channel upgrade from 1-channel to 2-channel 59 or 63 GHz and 2-channel to 4-channel 33 GHz
Note: Only applies to Infiniium Z-Series models DSAZ632A, DSOZ632A, DSAZ592A, and DSOZ592A. No return to service center is required. Upgrade is software only.
Multi-frame options
Model numbers
N2107A
N2106A
N2105A
N2109AU
Description
Upgrades within the Z-Series family
Infiniium Z-Series multi-frame expansion kit from five to six frames
Infiniium Z-Series multi-frame expansion kit for adding one frame
Infiniium Z-Series multi-frame base kit for stacking two frames
Infiniium Z-Series sync port upgrade kit for 20 to 33 GHz models (> 33 GHz not needed)
34 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications
Vertical
Typical analog bandwidth (3 dB)
Analog bandwidth (3 dB) *
1-channel sample rate
2-channel sample rate
4-channel sample rate
Rise time/fall time
10 to 90% 4
20 to 80% 5
Input impedance 3
Sensitivity 2
Input coupling
Vertical resolution 1
Channel to channel isolation (any two channels
with equal V/div settings)
DC gain accuracy *
Maximum input voltage
Offset range
Offset accuracy *
Dynamic range
DC voltage measurement accuracy
RMS noise floor (scope only)
Volts/div
10 mV
50 mV
100 mV
1V
Z204A
Z254A
Z334A
Z504A
Z592A
Z594A
Z632A
Z634A
20 GHz
25 GHz
33 GHz
50 GHz
59 GHz
59 GHz
63 GHz
63 GHz
20 GHz
25 GHz
32 GHz
50 GHz
59 GHz
59 GHz
62 GHz
62 GHz
80 GSa/s 80 GSa/s 80 GSa/s
160 GSa/s 160 GSa/s 160 GSa/s 160 GSa/s 160 GSa/s
80 GSa/s 80 GSa/s 80 GSa/s
160 GSa/s 80 GSa/s
160 GSa/s 80 GSa/s 160 GSa/s
80 GSa/s 80 GSa/s 80 GSa/s
80 GSa/s —
80 GSa/s
—
80 GSa/s
Z204A
Z254A
Z334A
Z504A
Z592A
Z594A
Z632A
Z634A
22.0 ps
17.6 ps
13.3 ps
8.8 ps
7.5 ps
7.5 ps
7.0 ps
7.0 ps
15.6 ps
12.4 ps
9.4 ps
6.2 ps
5.3 ps
5.3 ps
4.9 ps
4.9 ps
50 Ω, ± 3%
1 mV/div to 1 V/div
DC
8 bits, ≥ 12 bits with averaging
RealEdge (1.85 mm) channels
DC to 40 GHz: 70 dB
40 GHz to BW: 60 dB
Standard (3.5 mm) channels
DC to BW: 70 dB
± 2% of full scale at full resolution channel scale (± 2.5% for 5 mV/div)
± 5 V for steady state and transient measurements
Vertical sensitivity
Available offset
Available offset (oscilloscope with
N7010A voltage termination adapter)
1 to 49 mV/div
± 0.4 V
±4V
50 to 79 mV/div
± 0.7 V
±4V
80 to 134 mV/div
± 1.2 V
±4V
135 to 239 mV/div
± 2.2 V
±4V
240 mV/div to 1 V/div
± 4.0 V
±4V
≤ 3.5 V: ± (2% of channel offset + 1% of full scale) + 1 mV
> 3.5 V: ± (2% of channel offset + 1% of full scale)
± 4 div from center screen
Dual cursor: ± [(DC gain accuracy) + (resolution)]
Single cursor: ± [(DC gain accuracy) + (offset accuracy) + (resolution/2)]
Z204A
Z254A
Z334A
Z504A
Z594A, Z592A Z634A, Z632A
0.41 mV (rms)
1.46 mV (rms)
2.90 mV (rms)
28.6 mV (rms)
0.48 mV (rms)
1.7 mV (rms)
3.3 mV (rms)
32.5 mV (rms)
0.60 mV (rms)
2.00 mV (rms)
3.90 mV (rms)
38.1 mV (rms)
0.90 mV (rms)
2.90 mV (rms)
5.70 mV (rms)
56.7 mV (rms)
0.96 mV (rms)
3.15 mV (rms)
6.2 mV (rms)
60 mV (rms)
1.0 mV (rms)
3.3 mV (rms)
6.4 mV (rms)
63 mV (rms)
*
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm up period, and ± 5 °C from annual calibration
temperature.
1.
2.
Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
Full scale is defined as 8 vertical divisions. Magnification is used below 7.5 mV/div. Below 7.5 mV/div, full-scale is defined as 60 mV/div. The major scale
settings are 5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, and 1 V.
Input impedance is valid when V/div scaling is adjusted to show all waveform vertical values within scope display.
Rise time calculated by using 0.44/BW for (10 to 90%) rise time.
Rise time calculated by using 0.31/BW for (20 to 80%) rise time.
3.
4.
5.
35 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
Horizontal
Horizontal system: Oscilloscope channels
Main timebase range
Main timebase delay range
Reference position
Zoom timebase range
Time scale accuracy 1, 8
Oscilloscope channel de-skew range
Intrinsic jitter 6
(Sample clock jitter)
Inter-channel intrinsic jitter 3
Inter-channel skew drift 3, 7
Jitter measurement floor 2
–– Time interval error
–– Period jitter
–– Cycle-cycle/N-cycle jitter
Inter-channel jitter measurement floor 2, 3, 5
1.
2.
3.
4.
5.
6.
7.
8.
2 ps/div to 200 s/div
0 s ± 200 s real time
Continuously adjustable across horizontal display range
1 ps/div to current main time scale setting
± (0.1 ppm initial + 0.1 ppm/year aging)
± 1 ms range, 10 fs resolution
Acquired time range or
Internal reference
External reference
delta-time interval
< 10 µs (1 µs/div)
50 fs rms
50 fs rms
75 fs rms
75 fs rms
100 µs (10 µs/div)
75 fs rms
75 fs rms
1 ms (100 µs/div)
100 fs rms
100 fs rms
10 ms (1 ms/div)
150 fs rms
125 fs rms
100 ms (10 ms/div)
200 fs rms
150 fs rms
1 s (100 ms/div)
150 fs rms
< 50 fs rms
< 50 fs rms
(Z502A/Z592A/Z632A
(Z204A/Z254A/Z334A)
2
2
 Noise Floor 

 + ( Intrinsic Jitter )
Slew
Rate


2
2
 Noise Floor 
2 
 + ( Intrinsic Jitter )
Slew
Rate


2
2
 Noise Floor 
3 
 + ( Intrinsic Jitter )
 Slew Rate 
2
2
 Time Interval   Time Interval   Inter channel 
 Error Edge1  +  Error Edge 2  + 
(
) 
(
)   Intrinsic Jitter

2
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) • 2 • π • f, slew rate of fast step ~= (10 to 90% rise time).
Intra-channel = both edges on the same channel, inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge.
Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time
Measurement Accuracy formula.
Scope channels and signal interconnect de-skewed prior to measurement.
External timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for
Time Interval Error formula and depends on delta-time between edges for all two-edge formulas.
Skew between channels caused by ± 5 °C temperature change.
Initial = immediately after factory or user calibration.
36 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
Horizontal (Continued)
Horizontal system: Oscilloscope channels (Continued)
Delta time measurement accuracy 2, 3, 4, 5
–– Intra-channel
–– No averaging
  Time Interval 2
± 5  
 +
  Error (Edge1) 

–– 256 averages
–– Inter-channel
–– No averaging
–– 256 averages
2.
3.
4.
5.
2
 Time Interval   Time Scale  Delta   

 Error Edge 2  +  
(
)    Accuracy   Time  


2
2


5  Time Interval   Time Interval    Time Scale  Delta   
±  
+
+


 
 
16  Error (Edge1)   Error (Edge 2)    Accuracy   Time   


2 
  Time Interval 2  Time Interval  2
 Inter channel  
5  
+
+
Error (Edge1)   Error (Edge 2)   Intrinsic Jitter 

± 

  Time Scale  Delta    Inter channel 


+
  Time   +  Skew Drift 


Accuracy
 
 




2
2
2

Time Interval   Time Interval   Inter channel  
 5  

+
+
 

16  Error (Edge1)   Error (Edge 2)   Intrinsic Jitter 
±

  Time Scale  Delta    Inter channel 


+

+





  Accuracy   Time    Skew Drift 


Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) • 2 • π • f, slew rate of fast step ~= (10 to 90% rise time).
Intra-channel = both edges on the same channel, inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge.
Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time
Measurement Accuracy formula.
Scope channels and signal interconnect de-skewed prior to measurement.
37 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
Acquisition
Maximum real-time sample rate
1 channels
2 channels
4 channels
Memory depth per channel
Z204A, Z254A, Z334A
Z592A, Z632A
80 GSa/s
160 GSa/s
80 GSa/s
80 GSa/s
80 GSa/s
—
4 channels (Z204A, Z254A, Z334A, Z504A, Z594A,
Z634A) and 2 channels (Z592A, Z632A)
Z504A, Z594A, Z634A
160 GSa/s
160 GSa/s
80 GSa/s
2 channels (Z204A, Z254A, Z334A, Z504A,
Z594A, Z634A) and 1 channel (Z592A,
Z632A)
100 Mpts
200 Mpts (standard on DSA models)
400 Mpts
1 Gpt
1 Gpt
2 Gpts
Standard
50 Mpts
Option 100
100 Mpts (standard on DSA models)
Option 200
200 Mpts
Option 500
500 Mpts
Option 01G
1 Gpt
Option 02G
2 Gpts
Maximum acquired time at highest real-time resolution
Real-time resolution
80 GSa/s
160 GSa/s
Resolution
12.5 ps
6.25 ps
Standard (20 M)
0.25 ms
0.125 ms
Option 50 M
0.625 ms
0.3125 ms
Option 100
1.25 ms
0.625 ms
Option 200
2.5 ms
1.25 ms
Option 500
6.25 ms
3.125 ms
Option 01G
12.5 ms
6.25 ms
Option 02G
25 ms
12.5 ms
Sampling modes
Real-time
Successive single shot acquisitions
Real-time with averaging
Selectable from 2 to 65534 (Up to 200,000 with function)
Real-time with peak detect
80 GSa/s (Unavailable on RealEdge channels)
Real-time with hi resolution
Real-time boxcar averaging reduces random noise and increases resolution (unavailable on RealEdge
channels)
Equivalent time
Resoution 338 fs
Gaussian magnitude, linear phase
Slower filter roll off while maintaining linear phase
Roll mode
Scrolls sequential waveform points across the display in a right-to-left rolling motion. Works at sample rates
up to 10 MSa/s with a maximum record length of 40 Mpts
Segmented memory
Captures bursting signals at max sample rate without consuming memory during periods of inactivity
Maximum time between triggers is 562,950 seconds
Re-arm time: 2.5 µs
Memory depth:
20 M
50 M
100 M
200 M
500 M
1G
2G
Max # of segments: 4096
8192
16384
32768
65536
131072
131072
Filters
Sin(x)/x Interpolation
On/off selectable FIR digital filter (2x, 4x, 8x, 16x settings). Digital signal processing adds points between
acquired data points to enhance measurement accuracy and waveform display
38 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
Hardware trigger
Sensitivity
Edge trigger bandwidth (Ch1 to Ch4)
Edge trigger bandwidth (AUX)
Minimum pulse width trigger
Hardware
Software (InfiniiScan)
Level range
Internal
Auxiliary
Sweep modes
Display jitter 2, 3, 4 (Trigger jitter)
Trigger sources
Trigger modes
Edge
Edge transition
Edge then edge (Time)
Edge then edge (Event)
Glitch
Pulse width
Runt
1.
Internal low: 2.0 div p-p 0 to 22 GHz
Internal high: 0.3 div p-p 0 to 18 GHz, 1.0 div p-p 0 to 22 GHz
> 20 GHz
400 MHz
250 ps
40 ps
± 4 div from center screen or ± 4 V, whichever is smaller
± 5 V, also limit input signal to ± 5 V
Auto, triggered, single
170 fs rms
Channel 1, Channel 2, Channel 3, Channel 4
Triggers on a specified slope (rising, falling or alternating between rising and falling) and voltage level on any
channel or auxiliary trigger. Edge trigger bandwidth is > 20 GHz
Trigger on rising or falling edges that cross two voltage levels in > or < the amount of time specified. Edge
transition setting from 250 ps
The trigger is qualified by an edge. After a specified time delay between 10 ns to 10 s, a rising or falling edge on
any one selected input will generate the trigger
The trigger is qualified by an edge. After a specified delay between 1 to 16,000,000 rising or falling edges,
another rising or falling edge on any one selected input will generate the trigger
Triggers on glitches narrower than the other pulses in your waveform by specifying a width less than your
narrowest pulse and a polarity. Triggers on glitches as narrow as 125 ps. Glitch range settings: < 250 ps to < 10 s
Trigger on a pulse that is wider or narrower than the other pulses in your waveform by specifying a pulse width and
a polarity. Triggers on pulse widths as narrow as 125 ps. Pulse width range settings 250 ps to 10 s. Trigger point
can be “end of pulse” or “time out”
Triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Can be time qualified with minimum setting of 250 ps
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Internal edge trigger mode with JitterFree correction. Value depends on scope settings and trigger signal characteristics, and is equal to Time Interval Error
value expressed in the formula above using the minimum Time Scale Accuracy value.
3. Value shown represents typical Display jitter for DSOZ334A at 100 mV/div triggering on 500 mVpp 16 GHz sin wave signal.
4. Sample rate at maximum. Noise and slew rate determined at fixed-voltage trigger threshold, near middle of signal. Displayed signal not vertically clipped.
39 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
Hardware trigger (Continued)
Timeout
Pattern/pulse range
Trigger when a channel stays high, low, or unchanged for too long. Timeout setting: from 250 ps to 10 s
Triggers when a specified logical combination of the channels is entered, exited, present for a specified period of
time or is within a specified time range or times out. Each channel can have a value of High (H), Low (L) or Don’t care
(X)
State
Pattern trigger clocked by the rising, falling or alternating between rising and falling edge of one channel
Window
Triggers on an event associated with a window defined by two-user adjustable thresholds. Event can be window
“entered,” “exited,” “inside (time qualified),” or “outside (time qualified)” voltage range. Trigger point can be “cross
window boundary” or “time out.” Time qualify range: from 250 ps to 10 s
Video
Triggers from negative sync composite video, field 1, field 2, or alternating fields for interlaced systems, any field,
specific line, or any line for interlaced or non-interlaced systems. Supports NTSC, PAL-M (525/60), PAL, SECAM
(625/50), EDTV (480p/60), EDTV (576p/50), HDTV (720p/60), HDTV (720p/50), HDTV (1080i/60), HDTV (1080i/50),
HDTV (1080p/60), HDTV (1080p/50), HDTV (1080p/30), HDTV (1080p/25), HDTV (1080p/24), and user-defined
formats
Trigger sequences
Three-stage trigger sequences including two-stage hardware (Find event (A) and Trigger event (B)) and one-stage
InfiniiScan software trigger. Supports all hardware trigger modes except “edge then edge” and “video,” and all
InfiniiScan software trigger modes. Supports “delay (by time)” and “reset (by time or event)” between two hardware
sequences. The minimum latency between “find event (A)” and “trigger event (B)” is 3 ns
Trigger qualification and qualifier
Single or multiple channels may be logically qualified with any other trigger mode
Trigger holdoff range
100 ns to 10 s
Trigger actions
Specify an action to occur and the frequency of the action when a trigger condition occurs. Actions include email on
trigger and execute “multipurpose” user setting
Software trigger (Requires N5414B InfiniiScan event identification software – Option 009)
Trigger modes
Zone qualify
Software triggers on the user-defined zones on screen. Zones can be specified as either “must intersect” or “must
not intersect.” Up to eight zones can be defined across multiple channels
Generic serial
Software triggers on NRZ-encoded data up to 8.0 Gbps, up to 80-bit pattern. Support multiple clock data recovery
methods including constant frequency, 1st-order PLL, 2nd-order PLL, explicit clock, explicit 1st-order PLL, explicit
2nd-order PLL, Fibre Channel, FlexRay receiver, FlexRay transmitter (requires E2688A except for the constant
frequency clock data recovery mode)
Measurement limit
Software triggers on the results of the measurement values. For example, when the “pulse width” measurement is
turned on, InfiniiScan measurement software trigger triggers on a glitch as narrow as 40 ps. When the “time interval
error (TIE)” is measured, InfiniiScan can trigger on a specific TIE value
Non-monotonic edge
Software triggers on the non-monotonic edge. The non-monotonic edge is specified by setting a hysteresis value
Runt
Software triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the
first again. Unlike hardware runt trigger, InfiniiScan runt trigger can be further qualified via a hysteresis value
40 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
Hardware trigger (Continued)
Maximum measurement update rate
Measurement modes
Waveform measurements
Voltage
Time
Clock
Data
Mixed
Frequency domain
Level qualification
Eye-diagram measurements
Jitter analysis measurements
Clock
Data
Statistics
Histograms
Source
Orientation
Measurements (available as a function)
Mask testing
Waveform math
Number of functions
Hardware accelerated math operations
FFT
Frequency range
Frequency resolution
Window modes
> 50,000 measurement/sec (one measurement turned on)
> 250,000 measurement/sec/measurement (ten measurements turned on)
Standard, Measure all edges mode
Peak to peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, preshoot, upper, middle,
lower, Vovershoot, Vtime, Vpreshoot, crossing, pulse base, pulse amplitude, pulse top, PAM level mean 2,
PAM level RMS 2, PAM level skew 2, PAM level thickness 2
Rise time, fall time, positive width, negative width, burst width, burst period, burst interval, Tmin, Tmax,
Tvolt, + pulse count, - pulse count
Period, frequency, duty cycle to duty cycle, phase, N-period
Setup time, hold time
Area, slew rate
FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude, peak detect mode
Any channels that are not involved in a measurement can be used to level-qualify all timing measurements
Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion
Requires Option 002 (or E2681A), 004 (N5400A), or 070 (N8823A). Standard on DSA Series
Time interval error, N-period, period to period, positive width to positive width, neg width to neg width, and
duty cycle to duty cycle
Time interval error, unit interval, N Unit Interval, unit interval to unit interval, data rate, CDR, de-emphasis
Displays the current, mean, minimum, maximum, range (max-min), standard deviation, number of
measurements value for the displayed automatic measurements
Waveform or measurement
Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are
defined using waveform markers
Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits,
peak (area of most hits), X scale hits, and X offset hits
Allows pass/fail testing to user-defined or Keysight-supplied waveform templates. Automask lets you
create a mask template from a captured waveform and define a tolerance range in time/voltage or screen
divisions. Test modes (run until) include test forever, test to specified time or event limit, and stop on
failure. Executes “multipurpose” user setting on failure
“Unfold real-time eye” feature allows individual bit errors to be observed by unfolding a real-time eye when
clock recovery is on
Communications mask test kit option provides a set of ITU-T G.703, ANSI T1.102, and IEEE 802.3 industrystandard masks for compliance testing
Sixteen
Differential and Common Mode
Absolute value, add, amplitude demodulation (radar envelope), average, Butterworth 1, common mode,
delay, differentiate, divide, FFT magnitude, FFT, phase, FIR 1, high pass filter, histogram, horizontal gating,
integrate, invert, LFE 1, low pass filter (4th-order Bessel Thompson filter), magnify, max, measurement
trend, min, multiply, RT Eye 1, smoothing, SqrtSumOfSquare 1, square, square root, subtract, versus, and
optional user defined function (Option 010)
DC to 80 GHz (at 160 GSa/s) or 40 GHz (at 80 GSa/s) or 20 GHz (at 40 GSa/s)
Sample rate/memory depth = resolution
Hanning, flattop, rectangular, Blackman-Harris, Hamming
1. Requires EZJIT Plus (Option N5400A) or EZJIT Complete (Option N8823A) software.
2. Requires PAM-4 analysis (Option N8827A) software.
41 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
Hardware trigger (Continued)
Measurement modes
Automatic measurements
Multipurpose
Drag-and-drop measurement
toolbar
Marker modes
Bookmarks and callouts
Display
Display
Intensity grayscale
Resolution XGA
Annotation
Grids
Waveform styles
Measure menu access to all measurements, up to 20 measurements can be displayed simultaneously
Front-panel button activates up to ten pre-selected or up to ten user-defined automatic measurements
Measurement toolbar with common measurement icons that can be dragged and dropped onto the displayed
waveforms
Manual markers, track waveform data, track measurements
Supports callouts for measurements and FFT peaks. Supports bookmarks for team collaboration
15.4-inch color XGA TFT-LCD with capacitive touch screen
256-level intensity-graded display
1024 pixels horizontally x 768 pixels vertically
Up to 100 bookmarks can be inserted into the waveform window. Each can float or be tied to a specific waveform
Choose between 1-16 grids per waveform area, 8 bit vertical resolution
Connected dots, dots, infinite persistence, color graded infinite persistence. Includes up to 256 levels of intensitygraded waveforms., variable persistence
Waveform area
Supports eight waveform areas plus chart mode for EZJIT Plus, InfiniiSim, protocol, and PrecisionProbe
Maximum update rate
> 400,000 waveforms per second (when in the segment memory mode)
Computer system and peripherals, I/O ports
Computer system and peripherals
Operating system
Windows 7 64-bit
CPU
Intel i5-3550S quad-core CPU at 3.00 GHz
PC system memory
16 GB DDR3 RAM
Drives (SSD)
500-GB internal hard drive removable hard drive, additional hard drives (N2110A)
Peripherals
Logitech optical USB mouse, compact USB keyboard supplied. All Infiniium models support any Windowscompatible input device with a serial, PS/2 or USB interface.
File types
Waveforms
Compressed internal format (*.wfm (200 Mpts)), comma-separated values (*.csv (2 Gpts)), tab-separated values
(*.tsv (2 Gpts)), public binary format (.bin (500 Mpts)), Y value files (*.txt (2 Gpts)), hierarchal data file (*.hf5 (2 Gpts)),
composite data file (*.osc (2 Gpts))
Images
BMP, PNG, TIFF, GIF, JPEG or osc file format
I/O ports
RS-232 (serial), parallel, PS/2, USB 2.0 hi-speed (host), USB 2.0 hi-speed (device), VGA, DisplayPort, USB 3.0,
dual-monitor video output, auxiliary output, trigger output, time base reference output
42 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Specifications (Continued)
General characteristics
Temperature
Humidity
Altitude
Vibration
Power
Weight
Dimensions
Safety
Operating: 5 to + 40 °C; Non-operating: –40 to +65 °C
Operating: Up to 95% relative humidity (non-condensing) at +40 °C
Non-operating: Up to 90% relative humidity at +65 °C
Operating: Up to 4,000 meters (12,000 feet); Non-operating: Up to 15,300 meters (50,000 feet)
Operating random: 00.21 g (rms)
Non-operating random: 2.0 g (rms)
Swept sines: (0.50 g)
100 to 240 VAC ± 10% at 50/60 Hz
Maximum input power 1350 W
Well-regulated power is required for 100 to 120 VAC operation
32.2 kg (71 lbs)
Height: 33.8 cm (13.3 in); Width: 50.8 cm (20 in); Depth: 49.3 cm (19.4 in)
CAN/CSA-C22.2 No. 61010-1-04 UL Std. No. 61010-1 (2nd Edition)
Keysight Oscilloscopes
Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications
43 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. The business that became Keysight was a founding
member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo
are registered US trademarks of the PCI Industrial Computer Manufacturers
Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the Web
inside your test systems. The business that became Keysight was a founding
member of the LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Download your next insight
Keysight software is downloadable
expertise. From first simulation through
first customer shipment, we deliver the
tools your team needs to accelerate from
data to information to actionable insight.
–– Electronic design automation (EDA)
software
–– Application software
–– Programming environments
–– Productivity software
Learn more at
www.keysight.com/find/software
Start with a 30-day free trial.
www.keysight.com/find/free_trials
44 | Keysight | Infiniium Z-Series Oscilloscopes - Data Sheet
Evolving Since 1939
Our unique combination of hardware, software, services, and people can help you
reach your next breakthrough. We are unlocking the future of technology.
From Hewlett-Packard to Agilent to Keysight.
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Keysight Services
www.keysight.com/find/service
Keysight Services can help from acquisition to renewal across your
instrument’s lifecycle. Our comprehensive service offerings—one-stop
calibration, repair, asset management, technology refresh, consulting,
training and more—helps you improve product quality and lower costs.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost
of ownership. Keysight is the only test and measurement company with
three-year warranty standard on all instruments, worldwide. And, we provide
a one-year warranty on many accessories, calibration devices, systems and
custom products.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your
instruments are operating to specification, so you can rely on accurate
measurements.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-6-20-17)
MIPI® service marks and logo marks are owned by MIPI Alliance, Inc. and any use of such
marks by Keysight Technologies is under license. Other service marks and trade names are
those of their respective owners.
DEKRA Certified
PCI-SIG®, PCIe® and the PCI Express® are US registered trademarks and/or service marks
of PCI-SIG.
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
www.keysight.com/find/Z-Series
ISO9001 Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2013 - 2017
Published in USA, July 17, 2017
5991-3868EN
www.keysight.com