Spec. No. : C351Y3 Issued Date : 2011.08.24 Revised Date : Page No. : 1/6 CYStech Electronics Corp. NPN Digital Transistors (Built-in Resistors) DTC114EY3 Features • Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). • The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. • Only the on/off conditions need to be set for operation, making device design easy. • Complements the DTA114EY3 • Pb-free package Equivalent Circuit Outline SOT-723 DTC114EY3 Collector(OUT) R1=10kΩ , R2=10 kΩ IN(B) : Base OUT(C) : Collector GND(E) : Emitter Base(IN) Emitter(GND) Absolute Maximum Ratings (Ta=25°C) Parameter Supply Voltage Input Voltage Output Current Power Dissipation Junction Temperature Storage Temperature DTC114EY3 Symbol VCC VI IO IO(max.) Pd Tj Tstg Limits 50 -10~+40 50 100 150 150 -55~+150 Unit V V mA mA mW °C °C CYStek Product Specification CYStech Electronics Corp. Spec. No. : C351Y3 Issued Date : 2011.08.24 Revised Date : Page No. : 2/6 Electrical Characteristics (Ta=25°C) Parameter Input Voltage Output Voltage Input Current Output Current DC Current Gain Input Resistance Resistance Ratio Transition Frequency Symbol VI(off) VI(on) VO(on) II IO(off) GI R1 R2/R1 fT Min. 3 30 7 0.8 - Typ. 10 1 250 Max. 0.5 0.3 0.88 0.5 13 1.2 - Unit V V V mA μA kΩ MHz Test Conditions VCC=5V, IO=100μA VO=0.3V, IO=10mA IO/II=10mA/0.5mA VI=5V VCC=50V, VI=0V VO=5V, IO=5mA VCE=10V, IC=5mA, f=100MHz * * Transition frequency of the device Ordering Information Device DTC114EY3 DTC114EY3 Package SOT-723 (Pb-free) Shipping Marking 8000 pcs / Tape & Reel 8A CYStek Product Specification Spec. No. : C351Y3 Issued Date : 2011.08.24 Revised Date : Page No. : 3/6 CYStech Electronics Corp. Typical Characteristics Current Gain vs Output Current Output Voltage vs Output Current 1000 Output Voltage---V O(on)(mV) 1000 Current Gain---GI Vo=5V 100 Io / Ii=20 100 10 10 1 10 Output Current ---Io(mA) 1 100 10 100 Output Current ---Io(mA) Output Current vs Input Voltage (OFF characteristics) Input Voltage vs Output Current (ON characteristics) 100 10 Output Current --- Io(mA) Input Voltage --- V I(on)(V) Vo=0.3V Vcc=5V 10 1 0.1 1 0.1 1 10 Output Current --- Io(mA) 100 0.1 1 Input Voltage --- VI(off)(V) 10 Power Derating Curve Power Dissipation---PD(mW) 160 140 120 100 80 60 40 20 0 0 DTC114EY3 50 100 150 Ambient Temperature---TA(°C) 200 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C351Y3 Issued Date : 2011.08.24 Revised Date : Page No. : 4/6 Reel Dimension Carrier Tape Dimension DTC114EY3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C351Y3 Issued Date : 2011.08.24 Revised Date : Page No. : 5/6 Recommended wave soldering condition Product Pb-free devices Peak Temperature 260 +0/-5 °C Soldering Time 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly Pb-free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 240 +0/-5 °C 217°C 60-150 seconds 260 +0/-5 °C 10-30 seconds 20-40 seconds 6°C/second max. 6 minutes max. 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. DTC114EY3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C351Y3 Issued Date : 2011.08.24 Revised Date : Page No. : 6/6 SOT-723 Dimension Marking: 8A 3-Lead SOT-723 Plastic Surface Mounted Package CYStek Package Code: Y3 Style: Pin 1.Base(IN) 2.Emitter(GND) 3.Collector(OUT) *Typical Millimeters Min. Max. 0.000 0.500 0.000 0.050 0.170 0.270 0.270 0.370 0.000 0.150 DIM A A1 b b1 c Inches Min. Max. 0.000 0.020 0.000 0.002 0.007 0.011 0.011 0.015 0.000 0.006 DIM D E E1 e θ Millimeters Min. Max. 1.150 1.250 1.150 1.250 0.750 0.850 0.800* 7° REF Inches Min. Max. 0.045 0.049 0.045 0.049 0.030 0.033 0.031* 7° REF Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: Pure tin plated. • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0. Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. DTC114EY3 CYStek Product Specification