TDK MLG0603S5N1T Inductors for high frequency multilayer ceramic Datasheet

I
N
D
U
C
T
O
R
S
May 2013
Inductors for High Frequency
Multilayer Ceramic
MLG series
MLG0603S
MLG1005S
MLG1608
0603 [0201 inch]*
1005 [0402 inch]
1608 [0603 inch]
* Dimensions Code JIS[EIA]
(1/23)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130531 / e521_mlg.fm
(2/23)
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Inductors for High Frequency Circuits
Multilayer Ceramic
Overview of the MLG Series
FEATURES
Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners, and other high
frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MLG
Series name
0603
S
L×W×H Dimensions
(mm)
0603
0.6×0.3×0.3
1005
1.0×0.5×0.5
1608
1.6×0.8×0.8
Product internal
code
B
S
0N3
Inductance
(nH)
1N1
1.1
11N
11
R10
100
1R0
1000
S
Inductance
tolerance
B
±0.1nH
C
±0.2nH
S
±0.3nH
D
±0.5nH
H
±3%
J
±5%
T
□□□
Packaging style
Internal code
T
Taping
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Operating
Storage
Type
temperature
temperature
(pieces/reel)
（°C）
（°C）
MLG0603S
–55 to +125
–55 to +125
15000
MLG1005S
–55 to +125
–55 to +125
10000
MLG1608
–55 to +125
–55 to +125
4000
The Storage temperature range is for after the circuit board is mounted.
Individual weight
（mg）
0.2
1
4
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(3/23)
I
N
D
U
C
T
O
R
S
Overview of the MLG Series
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(4/23)
I
N
D
U
C
T
O
R
S
MLGseries
MLG0603S Type
0.30±0.03
SHAPE & DIMENSIONS
0.15±0.05
0.15±0.05
0.30±0.03
0.6±0.03
Dimensions in mm
0.3
RECOMMENDED LAND PATTERN
0.25
0.3
0.25
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(5/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
Tolerance
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
Q
min.
L, Q measuring
frequency
(MHz)
—
—
—
—
—
—
—
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Self-resonant
frequency
(GHz)
min.
typ.
10.0
20 up
10.0
20 up
10.0
20 up
10.0
20 up
10.0
16.3
10.0
16.1
10.0
13.8
10.0
14.4
10.0
13.6
10.0
12.3
9.0
11.4
9.0
10.4
9.0
11.5
8.5
10.0
8.2
9.8
8.0
8.9
8.0
9.2
6.5
8.1
6.2
7.8
5.8
7.0
5.5
6.9
5.0
6.6
5.0
6.4
4.5
5.4
4.5
5.5
4.2
5.3
4.2
5.1
3.6
4.4
4.2
5.3
3.8
4.5
3.4
4.9
3.2
4.1
3.0
3.7
2.8
3.6
2.7
3.4
2.5
3.3
2.3
3.0
2.2
2.8
2.1
2.6
2.0
2.5
1.9
2.3
1.8
2.2
1.6
2.0
1.6
2.0
DC resistance
( )
max.
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.15
0.15
0.15
0.15
0.2
0.2
0.25
0.25
0.25
0.25
0.3
0.35
0.35
0.4
0.4
0.45
0.45
0.5
0.55
0.6
0.7
0.7
0.8
0.8
0.8
0.9
0.9
1.1
1.1
1.2
1.2
1.2
1.3
1.5
1.6
1.8
typ.
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.06
0.07
0.07
0.09
0.12
0.14
0.14
0.15
0.15
0.20
0.23
0.22
0.27
0.27
0.28
0.23
0.31
0.32
0.32
0.43
0.45
0.51
0.53
0.53
0.63
0.60
0.69
0.70
0.78
0.75
0.88
0.90
1.00
0.95
1.20
Rated current
(mA)
max.
Part No.
600
600
600
600
600
600
600
600
550
550
550
550
500
500
400
400
300
300
300
300
300
300
300
300
250
250
250
250
200
200
200
200
200
180
180
180
180
150
150
150
150
100
100
100
MLG0603S0N3△T□□□
MLG0603S0N4△T□□□
MLG0603S0N5△T□□□
MLG0603S0N6△T□□□
MLG0603S0N7△T□□□
MLG0603S0N8△T□□□
MLG0603S0N9△T□□□
MLG0603S1N0△T□□□
MLG0603S1N1△T□□□
MLG0603S1N2△T□□□
MLG0603S1N3△T□□□
MLG0603S1N5△T□□□
MLG0603S1N6△T□□□
MLG0603S1N8△T□□□
MLG0603S2N0△T□□□
MLG0603S2N2△T□□□
MLG0603S2N4△T□□□
MLG0603S2N7△T□□□
MLG0603S3N0△T□□□
MLG0603S3N3△T□□□
MLG0603S3N6△T□□□
MLG0603S3N9△T□□□
MLG0603S4N3△T□□□
MLG0603S4N7△T□□□
MLG0603S5N1△T□□□
MLG0603S5N6△T□□□
MLG0603S6N2△T□□□
MLG0603S6N8△T□□□
MLG0603S7N5△T□□□
MLG0603S8N2△T□□□
MLG0603S9N1△T□□□
MLG0603S10N△T□□□
MLG0603S11N△T□□□
MLG0603S12N△T□□□
MLG0603S13N△T□□□
MLG0603S15N△T□□□
MLG0603S16N△T□□□
MLG0603S18N△T□□□
MLG0603S20N△T□□□
MLG0603S22N△T□□□
MLG0603S24N△T□□□
MLG0603S27N△T□□□
MLG0603S30N△T□□□
MLG0603S33N△T□□□

The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
 The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(6/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
Tolerance
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
Q
min.
L, Q measuring
frequency
(MHz)
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
5
5
5
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Self-resonant
frequency
(GHz)
min.
typ.
1.5
1.8
1.4
1.6
1.3
1.6
1.3
1.5
1.2
1.5
1.2
1.4
1.1
1.3
1.05
1.24
0.95
1.17
0.90
1.08
0.77
0.94
0.77
0.94
0.77
0.94
0.70
0.88
0.67
0.84
0.64
0.77
0.60
0.73
0.56
0.68
DC resistance
( )
max.
2.0
2.0
2.2
2.2
2.8
3.2
3.3
3.5
3.8
4.0
4.3
4.5
6.5
7.0
7.3
8.0
8.3
8.5
typ.
1.68
1.40
1.91
1.48
1.98
2.11
2.22
2.40
2.67
2.80
2.97
3.13
5.24
5.53
5.68
6.24
6.67
6.99
Rated current
(mA)
max.
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Part No.
MLG0603S36N△T□□□
MLG0603S39N△T□□□
MLG0603S43N△T□□□
MLG0603S47N△T□□□
MLG0603S51N△T□□□
MLG0603S56N△T□□□
MLG0603S62N△T□□□
MLG0603S68N△T□□□
MLG0603S75N△T□□□
MLG0603S82N△T□□□
MLG0603S91N△T□□□
MLG0603SR10△T□□□
MLG0603SR11△T□□□
MLG0603SR12△T□□□
MLG0603SR13△T□□□
MLG0603SR15△T□□□
MLG0603SR16△T□□□
MLG0603SR18△T□□□

The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
 The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(7/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
800MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.1
1.1
1.2
1.2
1.4
1.4
1.5
1.5
1.7
1.7
1.9
1.9
2.1
2.0
2.2
2.2
2.5
2.5
2.8
2.8
3.1
3.1
3.4
3.4
3.7
3.7
4.1
4.1
4.4
4.4
4.8
4.8
5.3
5.3
5.9
5.9
6.4
6.5
7.1
7.1
7.8
7.8
8.6
8.6
10
10
10
11
11
12
12
13
14
15
15
16
17
18
19
20
21
23
23
24
27
29
29
32
33
36
1.8GHz
0.3
0.4
0.5
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.4
1.5
1.7
1.9
2.1
2.2
2.6
2.9
3.2
3.5
3.8
4.3
4.8
5.1
5.7
6.5
7.4
7.8
8.8
9.8
12
13
14
16
20
22
28
32
40
45
2.0GHz
0.3
0.4
0.5
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.4
1.5
1.7
1.9
2.1
2.3
2.6
2.9
3.3
3.6
3.9
4.4
4.9
5.3
5.9
6.8
7.8
8.0
9.3
10.3
12
14
15
17
23
25
35
2.4GHz
0.3
0.4
0.5
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.4
1.5
1.7
1.9
2.1
2.3
2.7
3.0
3.4
3.7
4.1
4.6
5.2
5.6
6.4
7.5
8.7
8.7
10.4
11.5
15
16
19
22
33
37
Q typ.
500MHz
14min.
14min.
14
16
16
15
15
14
14
14
14
15
14
15
14
14
14
15
15
15
14
15
14
15
14
16
15
15
14
15
14
15
15
16
14
15
14
14
13
15
13
15
13
14
800MHz
18min.
18min.
18
20
21
20
19
18
19
18
18
19
18
19
18
18
18
19
19
19
18
19
18
20
18
20
18
19
18
18
17
18
18
19
16
19
16
17
16
17
15
17
15
16
1.8GHz
29min.
29min.
29
33
33
32
30
29
29
29
29
29
29
29
28
27
27
28
29
28
26
29
27
28
25
27
25
26
25
24
22
23
22
24
19
20
16
15
14
13
13
2.0GHz
32min.
32min.
32
34
35
34
32
30
31
30
30
30
30
30
29
28
29
29
31
29
27
29
27
29
26
28
25
26
26
24
22
22
22
23
18
18
15
13
2.4GHz
35min.
35min.
35
39
39
38
35
34
34
34
33
34
33
33
32
31
32
31
33
31
29
32
29
30
27
29
26
25
26
24
22
21
20
20
15
14
11
Part No.*
MLG0603S0N3△T□□□
MLG0603S0N4△T□□□
MLG0603S0N5△T□□□
MLG0603S0N6△T□□□
MLG0603S0N7△T□□□
MLG0603S0N8△T□□□
MLG0603S0N9△T□□□
MLG0603S1N0△T□□□
MLG0603S1N1△T□□□
MLG0603S1N2△T□□□
MLG0603S1N3△T□□□
MLG0603S1N5△T□□□
MLG0603S1N6△T□□□
MLG0603S1N8△T□□□
MLG0603S2N0△T□□□
MLG0603S2N2△T□□□
MLG0603S2N4△T□□□
MLG0603S2N7△T□□□
MLG0603S3N0△T□□□
MLG0603S3N3△T□□□
MLG0603S3N6△T□□□
MLG0603S3N9△T□□□
MLG0603S4N3△T□□□
MLG0603S4N7△T□□□
MLG0603S5N1△T□□□
MLG0603S5N6△T□□□
MLG0603S6N2△T□□□
MLG0603S6N8△T□□□
MLG0603S7N5△T□□□
MLG0603S8N2△T□□□
MLG0603S9N1△T□□□
MLG0603S10N△T□□□
MLG0603S11N△T□□□
MLG0603S12N△T□□□
MLG0603S13N△T□□□
MLG0603S15N△T□□□
MLG0603S16N△T□□□
MLG0603S18N△T□□□
MLG0603S20N△T□□□
MLG0603S22N△T□□□
MLG0603S24N△T□□□
MLG0603S27N△T□□□
MLG0603S30N△T□□□
MLG0603S33N△T□□□
The
" △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
 The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(8/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
36
40
44
49
52
59
66
74
82
96
109
129
134
156
172
223
238
318
800MHz
40
47
53
60
64
77
88
104
119
161
1.8GHz
2.0GHz
2.4GHz
Q typ.
500MHz
14
13
14
13
11
12
11
13
10
12
9
11
10
9
8
7
7
6
800MHz
15
14
14
13
11
11
10
11
8
8
1.8GHz
2.0GHz
2.4GHz
Part No.*
MLG0603S36N△T□□□
MLG0603S39N△T□□□
MLG0603S43N△T□□□
MLG0603S47N△T□□□
MLG0603S51N△T□□□
MLG0603S56N△T□□□
MLG0603S62N△T□□□
MLG0603S68N△T□□□
MLG0603S75N△T□□□
MLG0603S82N△T□□□
MLG0603S91N△T□□□
MLG0603SR10△T□□□
MLG0603SR11△T□□□
MLG0603SR12△T□□□
MLG0603SR13△T□□□
MLG0603SR15△T□□□
MLG0603SR16△T□□□
MLG0603SR18△T□□□
The
" △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
 The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(9/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
R18
R15
R12
47N 39N
82N
R10 68N
56N
33N
27N
22N 18N
15N
100
12N
Inductance(nH)
10N
8N2
6N8
10
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1
0
10
1N0
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(10/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
50
40
1N0
1N2
1N5
1N8
2N7
2N2
3N9
㻌
3N3
30
4N7
Q
5N6
6N8
20
18N
8N2
22N
27N
33N
39N
10N
12N
47N
68N
10
56N
R10
82N
R12
15N
R15
R18
0
10
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(11/23)
I
N
D
U
C
T
O
R
S
MLGseries
MLG1005S Type
0.50±0.05
SHAPE & DIMENSIONS
0.25±0.10
0.25±0.10
0.50±0.05
1.00±0.05
Dimensions in mm
0.5
RECOMMENDED LAND PATTERN
0.5
0.4
0.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(12/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
Q
min.
Tolerance
±0.1nH, ±0.2nH
±0.1nH, ±0.2nH
±0.1nH, ±0.2nH
±0.1nH, ±0.2nH
±0.1nH, ±0.2nH
±0.1nH, ±0.2nH
±0.1nH, ±0.2nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.1nH, ±0.2, 0.3nH
±0.2nH, ±0.3nH
±0.2nH, ±0.3nH
±0.2nH, ±0.3nH
±0.2nH, ±0.3nH
±3%, ±0.3nH
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
—
—
—
—
—
—
—
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
L, Q measuring
frequency
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Self-resonant
frequency
(GHz)
min.
typ.
10.0
20up
10.0
20up
10.0
20up
10.0
20up
10.0
18.7
10.0
16.4
10.0
17.7
10.0
13.8
10.0
19.3
10.0
11.6
8.00
11.7
8.00
9.6
7.50
9.4
8.00
10.3
7.50
9.3
7.00
8.6
7.00
8.2
6.00
7.3
5.50
6.8
5.00
6.1
5.00
6.7
5.00
6.5
4.50
6.0
4.50
5.4
4.00
5.0
4.00
5.3
4.00
4.7
3.50
4.4
3.00
4.1
3.00
4.0
3.00
3.8
2.50
3.4
2.50
3.5
2.50
3.0
2.40
2.9
2.20
2.8
2.10
2.7
2.00
2.5
1.90
2.4
1.70
2.2
1.70
2.1
1.60
2.0
1.50
1.9
DC resistance
( )
max.
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.12
0.15
0.15
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.35
0.40
0.40
0.50
0.55
0.55
0.60
0.60
0.70
0.70
0.80
0.80
typ.
0.01
0.01
0.01
0.01
0.02
0.02
0.04
0.04
0.03
0.04
0.04
0.06
0.05
0.06
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.11
0.11
0.12
0.13
0.14
0.16
0.15
0.15
0.19
0.20
0.22
0.28
0.25
0.26
0.35
0.32
0.40
0.38
0.46
0.43
0.53
0.50
Rated current
(mA)
max.
Part No.*
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
900
900
900
800
800
800
800
700
700
700
700
600
600
600
600
500
500
500
500
400
400
400
400
400
350
350
350
350
300
300
MLG1005S0N3△T□□□
MLG1005S0N4△T□□□
MLG1005S0N5△T□□□
MLG1005S0N6△T□□□
MLG1005S0N7△T□□□
MLG1005S0N8△T□□□
MLG1005S0N9△T□□□
MLG1005S1N0△T□□□
MLG1005S1N1△T□□□
MLG1005S1N2△T□□□
MLG1005S1N3△T□□□
MLG1005S1N5△T□□□
MLG1005S1N6△T□□□
MLG1005S1N8△T□□□
MLG1005S2N0△T□□□
MLG1005S2N2△T□□□
MLG1005S2N4△T□□□
MLG1005S2N7△T□□□
MLG1005S3N0△T□□□
MLG1005S3N3△T□□□
MLG1005S3N6△T□□□
MLG1005S3N9△T□□□
MLG1005S4N3△T□□□
MLG1005S4N7△T□□□
MLG1005S5N1△T□□□
MLG1005S5N6△T□□□
MLG1005S6N2△T□□□
MLG1005S6N8△T□□□
MLG1005S7N5△T□□□
MLG1005S8N2△T□□□
MLG1005S9N1△T□□□
MLG1005S10N△T□□□
MLG1005S11N△T□□□
MLG1005S12N△T□□□
MLG1005S13N△T□□□
MLG1005S15N△T□□□
MLG1005S16N△T□□□
MLG1005S18N△T□□□
MLG1005S20N△T□□□
MLG1005S22N△T□□□
MLG1005S24N△T□□□
MLG1005S27N△T□□□
MLG1005S30N△T□□□

The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
* The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B +16193A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(13/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
Q
min.
Tolerance
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
±3%, ±5%
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
6
6
6
6
L, Q measuring
frequency
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
Self-resonant
frequency
(GHz)
min.
typ.
1.40
1.8
1.30
1.7
1.20
1.6
1.20
1.6
1.10
1.4
1.10
1.5
1.00
1.3
1.00
1.3
0.80
1.1
0.75
1.1
0.70
1.0
0.70
0.9
0.70
0.9
0.70
0.9
0.60
0.8
0.60
0.8
0.55
0.7
0.50
0.6
0.50
0.6
0.42
0.5
0.45
0.5
0.40
0.5
0.40
0.5
0.35
0.4
0.35
0.4
0.30
0.4
0.30
0.4
DC resistance
( )
max.
0.90
1.00
1.00
1.10
1.20
1.20
1.30
1.40
1.50
1.50
1.60
1.80
2.00
2.20
2.20
2.50
3.50
3.80
3.80
4.20
4.20
4.80
4.80
6.50
7.00
7.50
8.00
typ.
0.59
0.62
0.65
0.67
0.75
0.72
0.83
0.85
0.87
0.93
1.01
1.14
1.37
1.48
1.48
1.68
2.44
2.74
2.88
3.15
3.02
3.42
3.54
4.82
5.21
5.39
5.97
Rated current
(mA)
max.
300
250
250
250
250
250
200
200
200
200
200
200
200
150
150
150
150
150
150
100
100
100
100
50
50
50
50
Part No.*
MLG1005S33N△T□□□
MLG1005S36N△T□□□
MLG1005S39N△T□□□
MLG1005S43N△T□□□
MLG1005S47N△T□□□
MLG1005S51N△T□□□
MLG1005S56N△T□□□
MLG1005S62N△T□□□
MLG1005S68N△T□□□
MLG1005S75N△T□□□
MLG1005S82N△T□□□
MLG1005S91N△T□□□
MLG1005SR10△T□□□
MLG1005SR11△T□□□
MLG1005SR12△T□□□
MLG1005SR13△T□□□
MLG1005SR15△T□□□
MLG1005SR16△T□□□
MLG1005SR18△T□□□
MLG1005SR20△T□□□
MLG1005SR22△T□□□
MLG1005SR24△T□□□
MLG1005SR27△T□□□
MLG1005SR30△T□□□
MLG1005SR33△T□□□
MLG1005SR36△T□□□
MLG1005SR39△T□□□

The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
* The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B +16193A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(14/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
800MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.8
0.9
0.9
1.0
1.0
1.1
1.1
1.2
1.2
1.4
1.4
1.5
1.5
1.7
1.7
1.9
1.9
2.1
2.1
2.3
2.3
2.6
2.6
2.9
2.9
3.2
3.2
3.4
3.4
3.7
3.7
4.1
4.1
4.5
4.5
4.9
4.9
5.4
5.4
6.0
6.0
6.5
6.6
7.2
7.4
7.9
8.0
8.8
9.0
9.7
9.9
10.6
10.9
11.7
12.1
12.6
13.0
14.7
15.3
15.6
16.2
17.7
18.6
19.7
20.8
21.8
23.3
23.8
25.5
27.0
29.6
30.1
33.5
1.8GHz
0.3
0.4
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.2
1.4
1.5
1.7
1.9
2.1
2.3
2.6
3.0
3.3
3.6
3.9
4.3
4.8
5.4
5.8
6.8
7.4
8.6
9.3
10.8
12.4
13.8
16.2
18.3
22.0
24.1
29.0
36.8
2.0GHz
0.3
0.4
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.2
1.5
1.6
1.7
1.9
2.1
2.3
2.7
3.0
3.4
3.6
3.9
4.4
4.9
5.6
5.9
7.1
7.8
9.2
9.9
11.6
13.5
15.1
18.3
21.3
26.0
29.0
2.4GHz
0.3
0.4
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.2
1.5
1.6
1.7
1.9
2.2
2.4
2.7
3.1
3.5
3.8
4.1
4.6
5.2
6.1
6.3
7.8
8.6
10.5
11.3
13.7
16.7
19.0
Q typ.
500MHz
22min.
22min.
22min.
22
22
26
21
22
23
23
22
23
23
20
21
22
21
22
24
24
21
22
24
23
23
22
24
23
24
23
24
24
23
23
20
23
22
23
21
22
22
20
19
800MHz
27min.
27min.
27min.
27
28
34
27
29
29
29
27
29
29
26
25
27
26
27
29
30
26
28
30
30
29
28
29
28
30
28
30
30
28
29
24
28
26
28
25
27
26
23
21
1.8GHz
46min.
46min.
46min.
46
45
57
44
48
47
48
44
47
46
41
41
44
42
43
47
46
40
43
47
45
42
42
42
40
41
38
40
37
34
33
25
29
26
26
21
2.0GHz
49min.
49min.
49min.
49
49
60
47
50
50
50
47
50
49
43
43
47
44
45
49
48
42
45
49
47
43
43
43
41
41
38
39
36
33
31
22
26
22
2.4GHz
53min.
53min.
53min.
53
54
66
53
56
57
56
53
56
54
49
48
52
49
50
54
53
46
50
53
50
44
45
43
41
39
36
36
31
28
Part No.*
MLG1005S0N3 △ T □□□
MLG1005S0N4 △ T □□□
MLG1005S0N5 △ T □□□
MLG1005S0N6 △ T □□□
MLG1005S0N7 △ T □□□
MLG1005S0N8 △ T □□□
MLG1005S0N9 △ T □□□
MLG1005S1N0 △ T □□□
MLG1005S1N1 △ T □□□
MLG1005S1N2 △ T □□□
MLG1005S1N3 △ T □□□
MLG1005S1N5 △ T □□□
MLG1005S1N6 △ T □□□
MLG1005S1N8 △ T □□□
MLG1005S2N0 △ T □□□
MLG1005S2N2 △ T □□□
MLG1005S2N4 △ T □□□
MLG1005S2N7 △ T □□□
MLG1005S3N0 △ T □□□
MLG1005S3N3 △ T □□□
MLG1005S3N6 △ T □□□
MLG1005S3N9 △ T □□□
MLG1005S4N3 △ T □□□
MLG1005S4N7 △ T □□□
MLG1005S5N1 △ T □□□
MLG1005S5N6 △ T □□□
MLG1005S6N2 △ T □□□
MLG1005S6N8 △ T □□□
MLG1005S7N5 △ T □□□
MLG1005S8N2 △ T □□□
MLG1005S9N1 △ T □□□
MLG1005S10N △ T □□□
MLG1005S11N △ T □□□
MLG1005S12N △ T □□□
MLG1005S13N △ T □□□
MLG1005S15N △ T □□□
MLG1005S16N △ T □□□
MLG1005S18N △ T □□□
MLG1005S20N △ T □□□
MLG1005S22N △ T □□□
MLG1005S24N △ T □□□
MLG1005S27N △ T □□□
MLG1005S30N △ T □□□
The
" △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
 The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(15/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
800MHz
33.5
37.8
36.7
41.5
40.3
46.9
44.3
51.6
50.2
63.2
53.7
65.6
60.9
80.2
67.5
89.8
75.8
107.5
86.5
135.2
96.9
111.0
128.9
140.8
175.2
187.8
284.7
1.8GHz
2.0GHz
2.4GHz
Q typ.
500MHz
20
21
20
20
19
19
19
18
17
17
16
15
14
15
12
13
11
800MHz
23
23
21
21
20
19
18
16
15
13
1.8GHz
2.0GHz
2.4GHz
Part No.*
MLG1005S33N △ T □□□
MLG1005S36N △ T □□□
MLG1005S39N △ T □□□
MLG1005S43N △ T □□□
MLG1005S47N △ T □□□
MLG1005S51N △ T □□□
MLG1005S56N △ T □□□
MLG1005S62N △ T □□□
MLG1005S68N △ T □□□
MLG1005S75N △ T □□□
MLG1005S82N △ T □□□
MLG1005S91N △ T □□□
MLG1005SR10 △ T □□□
MLG1005SR11 △ T □□□
MLG1005SR12 △ T □□□
MLG1005SR13 △ T □□□
MLG1005SR15 △ T □□□
MLG1005SR16 △ T □□□
MLG1005SR18 △ T □□□
MLG1005SR20 △ T □□□
MLG1005SR22 △ T □□□
MLG1005SR24 △ T □□□
MLG1005SR27 △ T □□□
MLG1005SR30 △ T □□□
MLG1005SR33 △ T □□□
MLG1005SR36 △ T □□□
MLG1005SR39 △ T □□□
The
" △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%).
Please contact us for information on inductance tolerance, G (±2%).
 The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(16/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
R18
R39
R22
R33
82N
R10
47N
22N
68N
56N
R27
39N
33N
27N
R15
R12
18N
100
15N
12N
Inductance(nH)
10N
8N2
6N8
10
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1
0
10
1N0
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(17/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
70
1N2
1N0
1N5
60
2N2
3N3
1N8
2N7
3N9
4N7
50
5N6
40
Q
6N8
30
8N2
22N
27N
82N
R10
33N
R12
20
39N
10N
47N
56N
R15
R18
68N
10
12N
R33
R27
18N
R22
R39
0
10
100
15N
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(18/23)
I
N
D
U
C
T
O
R
S
MLGseries
MLG1608Type
0.80±0.15
SHAPE & DIMENSIONS
0.30±0.20
0.30±0.20
0.80±0.15
1.60±0.15
Dimensions in mm
0.8
RECOMMENDED LAND PATTERN
0.6
0.8
0.6
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(19/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1608 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
Tolerance
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.5nH
±0.5nH
±0.5nH
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Q
min.
L, Q measuring
frequency
(MHz)
8
8
8
8
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
10
10
10
10
10
10
10
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
Self-resonant
frequency
(GHz)
min.
typ.
10.0
20up
10.0
20up
10.0
19.6
10.0
16.6
8.0
10.8
7.0
8.8
6.5
8.8
6.0
7.9
5.0
6.8
5.0
6.8
4.5
5.7
4.5
5.6
3.5
4.5
3.0
3.8
2.8
3.6
2.6
3.3
2.3
3.0
2.0
2.7
1.8
2.3
1.6
2.0
1.4
1.8
1.2
1.8
1.1
1.6
1.0
1.4
0.80
1.2
0.65
0.8
0.55
0.7
0.50
0.6
0.45
0.6
0.35
0.5
0.35
0.47
0.30
0.43
0.25
0.39
0.25
0.36
0.20
0.31
0.15
0.22
0.13
0.19
DC resistance
( )
max.
0.10
0.10
0.10
0.10
0.10
0.12
0.12
0.14
0.15
0.16
0.18
0.20
0.20
0.25
0.28
0.32
0.35
0.40
0.50
0.55
0.60
0.70
0.75
0.80
1.00
1.20
1.30
1.40
1.70
2.00
2.80
3.00
3.50
4.50
5.50
5.50
5.50
typ.
0.03
0.04
0.03
0.04
0.05
0.06
0.06
0.06
0.08
0.08
0.10
0.10
0.11
0.13
0.14
0.16
0.19
0.21
0.25
0.26
0.35
0.41
0.43
0.50
0.64
0.89
1.03
1.08
1.29
1.59
1.90
2.06
2.47
3.20
3.88
3.76
4.27
Rated current
(mA)
max.
Part No.
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
500
500
500
400
400
400
300
300
300
300
250
250
200
200
100
100
100
70
70
70
70
MLG1608B1N0ST□□□
MLG1608B1N2ST□□□
MLG1608B1N5ST□□□
MLG1608B1N8ST□□□
MLG1608B2N2ST□□□
MLG1608B2N7ST□□□
MLG1608B3N3ST□□□
MLG1608B3N9ST□□□
MLG1608B4N7ST□□□
MLG1608B5N6DT□□□
MLG1608B6N8DT□□□
MLG1608B8N2DT□□□
MLG1608B10NJT□□□
MLG1608B12NJT□□□
MLG1608B15NJT□□□
MLG1608B18NJT□□□
MLG1608B22NJT□□□
MLG1608B27NJT□□□
MLG1608B33NJT□□□
MLG1608B39NJT□□□
MLG1608B47NJT□□□
MLG1608B56NJT□□□
MLG1608B68NJT□□□
MLG1608B82NJT□□□
MLG1608BR10JT□□□
MLG1608SR12JT□□□
MLG1608SR15JT□□□
MLG1608SR18JT□□□
MLG1608SR22JT□□□
MLG1608SR27JT□□□
MLG1608SR33JT□□□
MLG1608SR39JT□□□
MLG1608SR47JT□□□
MLG1608SR56JT□□□
MLG1608SR68JT□□□
MLG1608SR82JT□□□
MLG1608S1R0JT□□□
* The " □□□ " of the Part Number contains the internal code.
Because it provides for a product of smaller inductance tolerance, please refer.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B +16193A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Yokogawa
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(20/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1608 Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
800MHz
1.0
1.0
1.2
1.1
1.5
1.5
1.8
1.8
2.2
2.1
2.6
2.6
3.2
3.2
3.8
3.8
4.6
4.6
5.4
5.5
6.6
6.7
8.0
8.1
9.8
10.0
11.8
12.1
14.8
15.4
17.8
18.5
21.9
22.9
27.1
28.8
33.4
36.0
40.2
45.0
49.1
56.0
59.6
71.1
74.0
92.8
91.1
120.6
118
188

1.8GHz
1.0
1.2
1.5
1.8
2.2
2.7
3.3
4.0
4.9
5.8
7.3
8.9
11.5
14.8
20.6
25.5
33.6
50.6
2.0GHz
1.0
1.2
1.5
1.8
2.2
2.7
3.3
4.0
5.0
5.9
7.5
9.3
12.1
16.0
23.4
29.3
40.2
2.4GHz
1.0
1.2
1.5
1.8
2.2
2.8
3.4
4.1
5.2
6.2
8.0
10
13.6
19.3
Q typ.
500MHz
39
28
37
38
44
40
38
40
41
37
38
39
38
39
38
36
36
37
37
36
38
37
34
33
35
23
800MHz
48
35
48
48
54
51
48
50
51
46
47
48
47
48
46
44
44
43
43
40
41
38
33
31
1.8GHz
77
57
78
77
88
79
76
79
76
69
67
67
63
59
49
47
43
34
2.0GHz
82
60
81
81
91
81
79
81
79
71
68
68
63
57
46
42
38
2.4GHz
95
68
93
95
107
94
91
93
88
79
74
71
61
51
Part No.*
MLG1608B1N0ST□□□
MLG1608B1N2ST□□□
MLG1608B1N5ST□□□
MLG1608B1N8ST□□□
MLG1608B2N2ST□□□
MLG1608B2N7ST□□□
MLG1608B3N3ST□□□
MLG1608B3N9ST□□□
MLG1608B4N7ST□□□
MLG1608B5N6DT□□□
MLG1608B6N8DT□□□
MLG1608B8N2DT□□□
MLG1608B10NJT□□□
MLG1608B12NJT□□□
MLG1608B15NJT□□□
MLG1608B18NJT□□□
MLG1608B22NJT□□□
MLG1608B27NJT□□□
MLG1608B33NJT□□□
MLG1608B39NJT□□□
MLG1608B47NJT□□□
MLG1608B56NJT□□□
MLG1608B68NJT□□□
MLG1608B82NJT□□□
MLG1608BR10JT□□□
MLG1608SR12JT□□□
MLG1608SR15JT□□□
MLG1608SR18JT□□□
MLG1608SR22JT□□□
MLG1608SR27JT□□□
MLG1608SR33JT□□□
MLG1608SR39JT□□□
MLG1608SR47JT□□□
MLG1608SR56JT□□□
MLG1608SR68JT□□□
MLG1608SR82JT□□□
MLG1608S1R0JT□□□
The " □□□ " of the Part Number contains the internal code.
Because it provides for a product of smaller inductance tolerance, please refer.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(21/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1608Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
10000
R68 R56
1R0
R82
R47
R39
R33
R27
R22 R18
R15
R12
1000
R10
82N
56N
68N
47N
39N
22N
33N
27N
100
18N
Inductance(nH)
15N
12N
10N
8N2
10
6N8
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1N0
1
0
10
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(22/23)
I
N
D
U
C
T
O
R
S
MLGseries MLG1608Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
100
1N5
2N7
3N3
3N9
2N2
4N7
1N8
90
5N6
6N8
80
1N2
1N0
70
8N2
Q
60
50
10N
27N
33N
40
39N
68N
56N
12N
30
R10
82N
R12
20
R15
R18
R56
R47
10
R22
15N
R39
R33
1R0
0
10
R68
R82
100
18N
47N
R27
22N
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm
(23/23)
I
N
D
U
C
T
O
R
S
MLGseries
Packaging Style
REEL DIMENSIONS
ø60min.
1.0
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
ø21±0.8
ø180±2.0
Dimensions in mm
3.5±0.05
Cavity
Type
MLG0603S
MLG1005S
MLG1608
A
0.5 max.
0.8 max.
1.1 max.
B
C
0.38±0.05 0.68±0.05
0.62±0.1 1.12±0.1
1.1±0.2
1.9±0.2
C
8.0±0.3
Sprocket hole
1.5 +0.1
–0.0
1.75±0.1
TAPE DIMENSIONS
A
B
4.0±0.1
2.0±0.05
160min.
Taping
2.0±0.05
200min.
300min.
Drawing direction
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130531 / e521_mlg.fm