Hi-Reliability Visible LED Lamp (TO46) OVM4x, OVM4xTX, OVM4xTXV • • • • Hermetically sealed TO-46 package Choice of blue, green, red or yellow High-brightness with well-defined spatial radiation patterns ESD protection built in Product Photo Here Each OVM4x, OVM4xTX and OVM4xTXV device is a high-reliability, high-sensitivity visible LED that is mounted in a hermetically sealed TO-46 package. “Hi-Reliability” Visible LEDs function in the abnormally severe levels of mechanical, environmental and electrical stress that are typical of military and harsh industrial applications. OVM4xTX and OVM4xTXV devices are processed to OPTEK’s 100% screening and QCI program-patterned after MIL-PRF-19500. Group A and B are performed on every lot. Group C is performed every six months. Applications • Automotive exterior and interior lighting • Architectural lighting • Electronic signs and signals Blue Intensity Typ. (mcd) 2260 Clear Glass InGaN Green 6520 Clear Glass OVM4RTXV AlInGaP Red 3300 Clear Glass OVM4YTXV AlInGaP Yellow 2010 Clear Glass Part Number Part Number Material Emitted Color OVM4BTX OVM4BTXV InGaN OVM4GTX OVM4GTXV OVM4RTX OVM4YTX ANODE (BRAZED) CATHODE (ISOLATED) Pin 2 Pin 1 RoHS Lens Color Pin 1 Cathode Pin 2 Anode Dimensions are in inches [ mm] DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 05/10 Page 1 of 4 Hi-Reliability Visible LED Lamp OVM4x, OVM4xTX, OVM4xTXV Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -65° C to +150° C Operating Temperature Range -55° C to +100° C Reverse Voltage 5V Continuous Forward Current 2 100 mA Peak Forward Current (10% Duty Cycle, 1 KHz) 1.6 A Power Dissipation 370 mW Lead Soldering Temperature (3mm from the case)1 260° C Current Linearity vs. Ambient Temperature -0.2 mA/° C LED Junction Temperature 115° C Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Design of heat dissipation should be considered. Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL Iv VF λP λD Δλ 2Θ½ PARAMETER Luminous Intensity Forward Voltage Peak Wavelength Dominant Wavelength Spectral Half Width 50% Power Angle MIN TYP MAX Blue ---- 2260 ---- Green ---- 6520 ---- Red ---- 3300 ---- Yellow ---- 2010 ---- Blue ---- 2.60 2.95 Green ---- 2.60 2.95 Red ---- 1.80 2.15 Yellow ---- 1.80 2.15 Blue ---- 463 ---- Green ---- 530 ---- Red ---- 630 ---- Yellow ---- 591 ---- Blue 460 465 470 Green 520 530 540 Red 619 624 629 Yellow 584 589 594 Blue ---- 22 ---- Green ---- 35 ---- Red ---- 15 ---- Yellow ---- 18 ---- ---- 18 ---- UNITS CONDITIONS mcd IF = 20 mA V IF = 20 mA nm IF = 20 mA nm IF = 20 mA nm IF = 20 mA deg IF = 20 mA Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 05/10 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Hi-Reliability Visible LED Lamp OVM4x, OVM4xTX, OVM4xTXV Typical Electro-Optical Characteristics Curves TJ = 25° C 4000 1.0 3500 0.8 3000 Red 0.6 Intensity (mcd) Normalized Spectral Intensity Input Current = 100 mA, TJ = 25° C Yellow Green Blue 0.4 2500 Red Yellow 2000 Green Blue 1500 1000 0.2 0.0 380 500 430 480 530 580 630 680 730 0 780 0 20 40 Wavelength (nm) Wavelength Characteristics 80 100 120 Intensity vs Forward Current 100 4.0 80 3.5 Red 3.0 60 Vf (V) If (mA) 60 Forward Current (mA) Red Yellow 40 Green Yellow Green 2.5 Blue Blue 20 2.0 0 1.5 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 -100 3.2 3.4 3.6 - 50 0 50 100 150 200 T e m pe r a t u r e ( D e g . C Vf (V) Forward Voltage vs Forward Current Forward Voltage vs Temperature 10.0 TA = 25°C IF = 20 mA OVM4B OVM4R 1.0 OVM4Y OVM4G 0.1 -75 - 50 -25 0 25 50 75 100 125 150 Deg C Relative Intensity vs Temperature Spatial Intensity Distribution OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 05/10 Page 3 of 4 Hi-Reliability Visible LED Lamp OVM4x, OVM4xTX, OVM4xTXV Shipping Information: Optek UV LEDs are shipped in either of the below noted conductive trays made for ESD sensitive devices. Each tray contains up to 100 pieces and is then sealed in a plastic ESD bag. Tray dimensions are in inches (mm). 14.76 4X 0.500 [12.70] 100X 0.250 100X 0.190 13.0 100X 0.250 100X 1.320 POCKET DETAIL OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 05/10 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com