DATASHEET Rev. A DTMPU16 SERIES 90~264VAC Input Voltage Range 15 Watts, Single Outputs Class I for A & C Types; Class II for B Type 3rd Edition Medical Approvals AC/DC Desktop Power Supplies IEC-320-C14 IEC-320-C8 IEC-320-C6 MEDICAL FEATURES • Class I for A & C Types; Class II for B Type • Efficiency up to 85% • RoHS Compliant • IEC-320-C14, IEC-320-C8, and IEC-320-C6 Input Inlets • Energy Star 2.0, Efficiency Level V Compliant Available • Meets FCC Part-18 Class B and EN55022 Class B • Single Outputs • Output Voltages Available from 5VDC to 36VDC • Wide Input Voltage Range: 90~264VAC, 47~63Hz Emission Limits • ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition) and • Over Voltage and Over Load Protection EN 60601-1:2006 (TUV/T-mark 3rd Edition) Medical • Over Temperature Detection Approvals DESCRIPTION The DTMPU16 series of medical AC/DC desktop power supplies provides up to 15 Watts of continuous output power. This series consists of single output models with a 90~264VAC input voltage range. All units are UL94V-1, RoHS, and Energy Star 2.0 Level V compliant. All models meet FCC Part-18 class B and EN55022 class B emission limits and have ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition) and EN 60601-1:2006 (TUV/T-mark: 3rd Edition) medical approvals. These units also meet new CE requirements and have been 100% burn-in tested. The DTMPU16 series has three types of input inlets available: IEC-320-C14 (A Type), IEC-320-C8 (B Type), and IEC-320-C6 (C Type). 02/22/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 Rev. A DTMPU16 Series Class I & II, Single Outputs 3rd Edition Medical Approvals 15W AC/DC Desktop Power Supplies SPECIFICATIONS: DTMPU16 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max 0.25 0.17 18 38 0.25 264 240 63 0.33 0.18 23 45 0.3 Unit INPUT SPECIFICATIONS Operating Input Voltage Range Safety Approvals Input Voltage Range Operating Voltage Range Input Frequency Low Line Input Current High Line Low Line Inrush Current High Line No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Load Regulation Line Regulation Output Power Output Current Range Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Start-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC No Load, Vin = 230VAC Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC Io = Full Load, Vin = 100VAC The parameter is not subject to production test-verified by design/characterization of integrated controller GENERAL SPECIFICATIONS Efficiency Dielectric Withstanding Voltage Isolation Resistance Safety Ground Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity MTBF PHYSICAL SPECIFICATIONS Weight Io = Full Load, Vin = 230VAC Primary to Secondary A, B, and C types Primary to Ground A and C types Test Voltage = 500VDC A and C types Io = Full Load, Vin = 240VAC Derating linearly from 100% Load at 50°C to 50% load at 70°C Operating Temp. at 25°C; calculated per MIL-HDBK-217F A, B, and C types A type Dimensions (L x W x H) B and C types SAFETY Safety Approvals EMI Requirements for EN55022 EMI Requirements for FCC PART-18 02/22/2012 0 1 0 10 -0.04 Over Temperature Detection (See Note 1) AC Inlets 90 100 47 A Type B Type C Type See Table 3 5 0.5 1 15 See Table 0.5 1 4 16 0.5 1 +0.04 VAC Hz A A A A W % % W % ms ms s %/°C 112 110 132 150 % % -20 125 °C 73 5656 2828 50 85 % VDC MΩ mA 0.3 0 -40 0 0 50 70 85 95 95 100,000 hours °C °C % % Approx. 6oz (170g) 4.11 x 1.65 x 1.22 inches (104.4 x 42.0 x 31.0 mm) 3.90 x 1.65 x 1.22 inches (99.0 x 42.0 x 31.0 mm) IEC-320-C14 IEC-320-C8 IEC-320-C6 ANSI/AAMI ES 60601-1:2005 (UL/cUL: 3rd Ed.), EN 60601-1:2006 (TUV/T-mark: 3rd Ed.), CE Vin = 230VAC, 50Hz B Class Vin = 120VAC, 60Hz B Class Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 5 DTMPU16 Series Class I & II, Single Outputs 3rd Edition Medical Approvals 15W AC/DC Desktop Power Supplies Rev. A MODEL SELECTION TABLE Model Number Input Voltage Range DTMPU16A-102 DTMPU16A-103 DTMPU16A-104 DTMPU16A-105 DTMPU16A-106 DTMPU16A-107 DTMPU16A-108 DTMPU16A-109 DTMPU16A-110 DTMPU16B-102 DTMPU16B-103 DTMPU16B-104 DTMPU16B-105 DTMPU16B-106 DTMPU16B-107 DTMPU16B-108 DTMPU16B-109 DTMPU16B-110 DTMPU16C-102 DTMPU16C-103 DTMPU16C-104 DTMPU16C-105 DTMPU16C-106 DTMPU16C-107 DTMPU16C-108 DTMPU16C-109 DTMPU16C-110 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC Output Voltage Output Current 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 36 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 36 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 36 VDC 2.60 ~ 2.16 A 2.16 ~ 1.62 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.93 A 0.93 ~ 0.71 A 0.71 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.41 A 2.60 ~ 2.16 A 2.16 ~ 1.62 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.93 A 0.93 ~ 0.71 A 0.71 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.41 A 2.60 ~ 2.16 A 2.16 ~ 1.62 A 1.87 ~ 1.36 A 1.36 ~ 1.15 A 1.15 ~ 0.93 A 0.93 ~ 0.71 A 0.71 ~ 0.55 A 0.55 ~ 0.45 A 0.45 ~ 0.41 A Total Regulation (2) 5% 5% 5% 5% 5% 5% 3% 3% 3% 5% 5% 5% 5% 5% 5% 3% 3% 3% 5% 5% 5% 5% 5% 5% 3% 3% 3% Output Power 13W 13W 15W 15W 15W 15W 15W 15W 15W 13W 13W 15W 15W 15W 15W 15W 15W 15W 13W 13W 15W 15W 15W 15W 15W 15W 15W Class AC Inlet Class I IEC-320-C14 Class II IEC-320-C8 Class I IEC-320-C6 NOTES 1. Over Temperature Detection: Thermal shutdown by junction temperature controller. When the power system interruption is isolated, the product will re-start after recovering by hand. 2. Models DTMPU16-102~103 need to use AWG#16/4FT output cable in order to meet the total regulation specified. Models DTMPU16-105~110 need to use AWG#18/4FT output cable in order to meet the total regulation specified. The regulation and efficiency will change if a different output cable is used. DERATING CURVE Output Power (%) 120 100 80 60 40 20 0 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) 02/22/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 Rev. A DTMPU16 Series Class I & II, Single Outputs 3rd Edition Medical Approvals 15W AC/DC Desktop Power Supplies MECHANICAL DRAWING TYPE A Unit: inches (mm) 0.02±0.04 (0.5±1.0) 0.04±0.04 (1.0±1.0) 1.22±0.04 (31.0±1.0) 1.65±0.04 (42.0±1.0) 4.11±0.04 (104.4±1.0) “A” TYPE AC INLET IEC-320-C14 TYPES B & C Unit: inches (mm) 3.90±0.04 (99.0±1.0) 0.02±0.04 (0.5±1.0) 0.04±0.04 (1.0±1.0) AC INLET IEC-320-C8 1.22±0.04 (31.0±1.0) 1.65±0.04 (42.0±1.0) “B” TYPE “C” TYPE AC INLET IEC-320-C6 02/22/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 Rev. A DTMPU16 Series Class I & II, Single Outputs 3rd Edition Medical Approvals 15W AC/DC Desktop Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 02/22/2012 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5