Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) Pb FEATURES: • Ceramic or Ferrite Construction assures the utmost in the thermal stablity and high SRF • Exceptionally high Q compared to non-wirewound inductor, especially at high frequencies • Inductance values available from 4.7 nH to 10,000nH RoHS/RoHS II Compliant 2.92 x 2.79 x 2.29m m | | | | | | | | | | | | | | APPLICATIONS: • Widely applied in the VCO, SAW circuit for GSM, CDMA communications • Used in hard disk, notebook computer and other electronic equipment STANDARD SPECIFICATIONS: Part Number AISC-1008Inductance Code Units Symbol AISC-1008-R0047 AISC-1008-R010 AISC-1008-R012 AISC-1008-R015 AISC-1008-R018 AISC-1008-R022 AISC-1008-R027 AISC-1008-R033 AISC-1008-R039 AISC-1008-R047 AISC-1008-R056 AISC-1008-R068 AISC-1008-R082 AISC-1008-R10 AISC-1008-R12 AISC-1008-R15 AISC-1008-R18 AISC-1008-R22 AISC-1008-R27 AISC-1008-R33 AISC-1008-R39 AISC-1008-R47 AISC-1008-R56 AISC-1008-R62 AISC-1008-R68 AISC-1008-R75 AISC-1008-R82 AISC-1008-R91 AISC-1008-1R0 AISC-1008-1R2 AISC-1008-1R5 AISC-1008-1R8 AISC-1008-2R2 AISC-1008-2R7 AISC-1008-3R3 AISC-1008-3R9 AISC-1008-4R7 AISC-1008-5R6 AISC-1008-6R8 AISC-1008-8R2 ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Inductance Tolerance nH L 4.7 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 620 680 750 820 910 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M G, J, K, M Min. Quality Factor Q 50 50 50 50 50 55 55 60 50 65 50 65 60 60 60 50 50 50 50 50 50 50 50 45 45 45 45 35 35 35 28 28 28 22 22 17 20 20 20 20 L/Q Test Freq. Max. DC Resistance Max. Rated Current Min. Self-resonant Frequency MHz Freq. 50/1500 50/500 50/500 50/500 50/350 50/350 50/350 50/350 50/350 50/350 50/350 50/350 50/350 25/350 25/350 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/50 25/50 7.9/50 7.9/50 7.9/50 7.9/50 7.9/25 7.9/25 7.9/25 7.9/25 7.9/25 7.9/25 7.9/25 Ω DCR 0.11 0.08 0.09 0.13 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.21 0.22 0.56 0.63 0.62 0.7 0.8 0.91 1.05 1.12 1.19 1.33 1.4 1.47 1.54 1.61 1.68 1.8 2 2.3 2.6 2.8 3.2 3.4 3.6 4 5.7 7.7 10.7 mA Ir 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 650 650 580 620 500 500 450 470 470 400 300 400 360 400 380 370 310 330 300 280 290 290 260 260 240 200 150 MHz S.R.F >6000 4100 3300 2500 2500 2400 1600 1600 1500 1500 1300 1200 800 1000 950 800 750 630 600 530 480 450 390 375 360 360 330 295 270 200 150 120 100 90 70 60 50 40 40 30 Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) Part Number AISC-1008FInductance Code Units Symbol AISC-1008F-R33 AISC-1008F-1R0 AISC-1008F-1R2 AISC-1008F-1R5 AISC-1008F-1R8 AISC-1008F-2R2 AISC-1008F-2R7 AISC-1008F-3R3 AISC-1008F-3R9 AISC-1008F-4R7 AISC-1008F-5R6 AISC-1008F-6R8 AISC-1008F-8R2 AISC-1008F-100 Pb Inductance Tolerance nH L 330 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M Min. Quality Factor Q 50 20 37 35 33 30 25 23 26 31 23 20 20 15 RoHS/RoHS II Compliant 2.92 x 2.79 x 2.29m m | | | | | | | | | | | | | | L/Q Test Freq. Max. DC Resistance Max. Rated Current Min. Self-resonant Frequency MHz Freq. 25/100 7.9/50 7.9/50 7.9/50 7.9/50 7.9/50 7.9/50 7.9/50 7.9/25 7.9/7.9 7.9/7.9 7.9/7.9 7.9/7.9 7.9/7.9 Ω DCR 0.17 0.80 0.80 0.76 0.84 1.15 1.30 1.70 2.00 1.68 2.65 3.00 3.30 2.95 mA Ir 700 600 650 630 600 520 490 450 420 400 380 360 330 300 MHz S.R.F 600 250 250 190 170 150 120 100 100 60 80 60 40 40 Test Conditions and Equipemt a. Ambient Temperature: 20± 15oC b. Relative Humidity: 65%±20% c. Air Pressure: 86KPa to 106KPa Inductance (L): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Direct Current Resistance (DCR): HIOKI 3540 or equivalent Q Factor (Q): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Self-Resonant Frequency (SRF): Agilent4991B+Agilent16197A and HP 8753E or equivalent, -20dBm or 50mV Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 20oC against chip initial surface temperature (Ta) Operating Temperature: -40ºC to +125ºC for AISC-1008, -40ºC to +85ºC for AISC-1008F Storage Temperature: -10ºC to +40ºC, 70% RH max. ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) Pb RoHS/RoHS II Compliant 2.92 x 2.79 x 2.29m m | | | | | | | | | | | | | | ELECTRICAL CHARACTERISTICS CURVES : AISC-1008-R010 AISC-1008-R082 AISC-1008-R27 AISC-1008-R010 AISC-1008-R082 AISC-1008-R27 AISC-1008F-1R0 AISC-1008F-2R2 AISC-1008F-4R7 AISC-1008F-1R0 AISC-1008F-2R2 AISC-1008F-4R7 PART IDENTIFICATION: AISC-1008 Material Code Blank: Ceramic - Inductance Code Tolerance Code G: ±2% Please refer to the table F: Ferrite - Packaging T: Tape & Reel (2k/reel) J: ±5% K: ±10% M: ±20% OUTLINE DIMENSIONS: A MAX. 2.92 B MAX. 2.79 C MAX. D REF. E F H REF. I REF. J REF. 2.29 0.51 2.1±0.2 0.5±0.2 2.54 1.02 1.27 Dimension: mm ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) Pb Materials No. A B C Components Coating Core Wire D Electrodes RoHS/RoHS II Compliant 2.92 x 2.79 x 2.29m m | | | | | | | | | | | | | | Material Ultraviolet epoxy resin Ceramic Polyurethane system enameled copper wire AISC-1008: Mo-Mn with Ni and Au plating AISC-1008F: Ag-Pd with Ni-Sn plating REFLOW PROFILE: ∆ ∆ ∆ ∆ ∆ ∆ 1~2 oC/sec. Ramp Pre-heating: 150~190oC /90±30 sec. Time above 240 oC: 20~40sec Peak temperature: 260 oC Max./10sec; Solder paste: Sn/3.0Ag/0.5Cu Max.2 times for Re-flowing B 3.5±0. 1 4.0±0.1 A P T 50 8.0±0.3 Φ1.5(+0.1/ -0) 1.75±0.1 TAPE & REEL: 2kpcs /Reel A P B 2.73±0.2 4.0±0.1 2.90±0.2 K Max 2.34±0.2 T 0.23±0.1 K 2.0±0.1 10 ±1.5 4.0±0.1 5.0 ±0.1 3.0 ±0.1 178 ±2 58 ±2 13.5 ±0.2 2.45 ±0.2 ATTENTION:Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com |