LUMINIS CL623 Heavy cast aluminum top cover with integral led heat dissipating pad Datasheet

CL613/CL623 SERIES
LumiSTIK - LED
6” BOLLARD
TYPE:
LumiStick
QUANTITY:
PROJECT:
CATALOG
NUMBER:
FIXTURE
WATTAGE
VOLTAGE
FINISH
OPTION
OPTION
OPTION
OPTION
CL613/CL623
1
2
1- Heavy cast aluminum top
cover with integral LED heat
dissipating pad.
2- Ø 6” (152) High impact white
translucent acrylic diffuser UV
stabilized. Available acrylic
heights include 12” (305) and 27”
(686).
3- Ø 6” (152) extruded aluminum
base.
3
MATERIALS
MOUNTING
LumiSTIK bollard is made of corrosion resistant 356 aluminum alloy with a
copper (CU) content of less than 0.1%.
LED is contained in a white UV stabilized high impact acrylic sealed cylinder.
The assembly is designed to provide a uniform column illumination.
Mounts with a set of 3 x 1/2”-13 x 18” lg galvanized anchor bolts.
ELECTRICAL
DRIVER
Standard driver is 0-10V dimming-ready (dims to 10%) with:
120-277 multi-volt compatibility (50-60Hz), operating temperature range of -30ºC/-22ºF to 60ºC/140ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery.
LED
Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.
Removable modular LED platform.
12”
(305)
27”
(686)
42”
(1066)
42”
(1066)
LIFE
50,000hrs L85B50 (based on IESNA TM-21 Test Method and LM-80 data).
FINISH
CL613
CL623
Five-stage preparation process includes preheating of cast aluminum parts
for air extraction. Polyester powder coating is applied through an electrostatic
process, and oven cured for long term finish.
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometric testing performed by an independent laboratory in accordance
with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with
IESNA LM80 standards. CE certification on request.
Rated IP65.
LUMINIS
Toll free: 866.586.4647 Fax: 514.683.8872
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
4.7” (119) dia. Bolt circle
April 2017 Rev 0
CERTIFICATION
6” (152) dia. Base
LUMINIS.COM
1
CL613/CL623 SERIES
LumiSTIK - LED
TYPICAL PHOTOMETRY SUMMARY
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
LUMINAIRE SELECTION
LED LIGHT SELECTION (4000K/80CRI)
MODEL
SUFFIX
CL613
L84W20
L84W40
VOLTAGE
INPUT WATTS
DELIVERED LUMENS 20W
40W
1640
3645
120V
277V
Optional
347V
CL613
1
FINISH
STANDARD COLORS
WHT Snow white
BKT Jet black
BZT Bronze
MST Matte silver
GRT Titanium gray
DGT Gun metal
CHT Champagne
SGT Steel Gray
BGT English Cream
OPTIONAL COLORS
Wood grain finishes
SUFFIX
CL623
L168W20
L168W45
INPUT WATTS
DELIVERED LUMENS 20W
45W
1700
3780
NMR Mahogany red2
NMO Maple oak2
NTW Teak wood2
Base column only
CS
Custom color
RAL RAL# color
(Refer to color chart)
CL623
OPTIONS
ELECTRICAL
LIGHT
REML2-50 Remote mount battery backup for LED 90 mins, 7W
Remote mount to 50ft. 12” square enclosure with acces cover
FS
Fuse
PH
Photocell
347L
347V input power driver
SP
Surge protector 10KV
Alternate CCT ºK LED (LCF: Lumen conversion factor)
K27
K3
K35
2700K CCT 80 CRI (LCF: 0.91)
3000K CCT 80 CRI (LCF: 0.94)
3500K CCT 80 CRI (LCF: 0.98)
NOTE: Other CCT & higher CRI available, please consult factory.
ACCESSORIES
GFI
CGF
Ground fault circuit interruption receptacle (CL613 only)3
Ground fault circuit interruption with clear in-use cover
(CL613 only)3
MOUNTING
PR6
Pedestal mount adaptor. OAH 22” (559). (CL613 only)
LUMINIS
Toll free: 866.586.4647 Fax: 514.683.8872
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
April 2017 Rev 0
NOTES
1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult
factory.
2- Cast aluminum top & base covers are as follows for selected wood grain finishes: BZT paired with NMR; SGT paired with NMO; BGT paired with
NTW (Other colors available. Please contact factory).
3- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92).
LUMINIS.COM
2
Similar pages