JCM30 Series DC-DC Converter 30 Watts xxx Series • Single and Dual Outputs • 1” x 1” Footprint • -40 °C to +105 °C Operation • Full Load at 55 °C Ambient • 1600 VDC Isolation • Output Trim ±10% • Remote On/Off • MTBF 370 kHrs • 3 Year Warranty Dimensions: JCM30: 1.0 x 1.0 x 0.41” (25.4 x 25.0 x 10.4 mm) Models & Ratings Input Voltage Output Voltage 9-18 V Input Current(1) Output Current No Load Full Load OVP setting Efficiency Max. capacitive load Model Number(3) JCM3012S3V3 3.3 V 7.0 A 10 mA 2215 mA 3.9 V 87% 10000 µF 5.0 V 6.0 A 10 mA 2810 mA 6.2 V 89% 7200 µF JCM3012S05 12.0 V 2.5 A 12 mA 2810 mA 15.0 V 89% 1200 µF JCM3012S12 15.0 V 2.0 A 12 mA 2810 mA 18.0 V 89% 1000 µF JCM3012S15 ±12.0 V ±1.25 A 12 mA 2810 mA ±15.0 V 89% ±750 µF JCM3012D12 ±15 V ±1.0 A 14 mA 2780 mA ±18.0 V 90% ±500 µF JCM3012D15 3.3 V 7.0 A 10 mA 1105 mA 3.9 V 87% 10000 µF 5V 6.0 A 10 mA 1390 mA 6.2 V 90% 7200 µF JCM3024S05 12 V 2.5 A 10 mA 1375 mA 15.0 V 91% 1200 µF JCM3024S12 15 V 2.0 A 10 mA 1375 mA 18.0 V 91% 1000 µF JCM3024S15 ±12 V ±1.25 A 10 mA 1375 mA ±15.0 V 91% ±750 µF JCM3024D12 ±15 V ±1.0 A 10 mA 1375 mA ±18.0 V 92% ±500 µF JCM3024D15 3.3 V 7.0 A 8 mA 545 mA 3.9 V 88% 10000 µF 5V 6.0 A 8 mA 695 mA 6.2 V 90% 7200 µF JCM3048S05 12 V 2.5 A 8 mA 695 mA 15.0 V 90% 1200 µF JCM3048S12 15 V 2.0 A 8 mA 685 mA 18.0 V 91% 1000 µF JCM3048S15 ±12 V ±1.25 A 8 mA 685 mA ±15.0 V 91% ±750 µF JCM3048D12 ±15 V ±1.0 A 8 mA 680 mA ±18.0 V 92% ±500 µF JCM3048D15 18-36 V 36-75 V JCM3024S3V3 JCM3048S3V3 Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. 3. Add suffix ‘-HK’ for optional Heat Sink. Mechanical Details 0.1 (2.54) Top View 0.4 (10.16) 4 6 5 2 1 1.0 (25.4) Notes 1 0.1 (2.54) 1. All dimensions are in inches (mm) 2. Weight: 0.042 lbs (19 g) approx. 3. Pin diameter: 0.04±0.002 (1.0 ±0.05) 1 0.2 (5.08) 0.5 (0.02) 0.41 (10.4) 2 0.04 (1.0) 1.0 (25.4) DIA 0.04 (1.0) 0.1 (2.54) Pin 1 2 3 4 5 6 3 0.3 (7.62) Pin Connections 0.66 (16.8) 1.0 (25.4) Print Face 0.6 (15.24) 0.8 (20.32) 3 0.1 (2.54) 6 5 4 1.0 (25.4) 0.4 (10.16) 0.24 (6.0) 4. Pin pitch tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) www.xppower.com Single +Vin -Vin Dual +Vin -Vin Remote Remote On/Off On/Off +Vout Trim -Vout +Vout Common -Vout JCM30 Series DC-DC Converter Input Characteristic Input Voltage Range Minimum Typical Notes & Conditions Maximum Units 9 18 VDC 12 V nominal 18 36 VDC 24 V nominal 75 VDC 48 V nominal 25 50 mA pk-pk VDC for 100 ms VDC for 100 ms Through 12 µH inductor and 47 µF capacitor 12 V models 24 V models 100 VDC for 100 ms 48 V models Maximum Units Notes & Conditions 30 VDC See Models and Ratings table 36 Input Reflected Ripple Current 30 Input Surge Output Characteristic Minimum Output Voltage 3.3 Output Trim ±10 Typical Initial Set Accuracy Minimum Load ±1 0 % Single Output Versions % At full load % No minimum load required From minimum to maximum input at full load Line Regulation ±0.5 % Load Regulation 0.5/1.0 % From 0% to full load for single/dual output ±5 % On dual output models, when one output is at 100% load and other is varied from 25% load to full load 75/60 mV pk-pk Cross Regulation Ripple & Noise Overload Protection 150 % Short Circuit Protection Continuous trip and restart (hiccup), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ ˚C Over Protection Voltage Remote On/Off Single output 10 µF X7R MLCC Dual output with 10 µF/25 V X7R MLCC on each output measured using 20 MHz bandwidth See Models and Ratings table Output is on if remote on/off (pin 3) is open or high (3.0 to 12 VDC) Output turns off if remote on/off (pin 3) is low (<1.2 VDC max) General Characteristic Minimum Efficiency Maximum 92 Isolation: Input to Output 1600 Isolation: Input to Case 1600 See Models and Ratings table VDC kHz 330 109 2000 Power Density 73 370 Weight Notes & Conditions VDC Isolation Capacitance Mean Time Between Failure Units % 270 Switching Frequency Isolation Resistance Typical Ω pF W/in3 kHrs 0.042 (19.0) 3.3 and 5.0 V Other models MIL-HDBK-217F, +25 °C GB lb (g) Environmental Characteristic Minimum Operating Temperature -40 Storage Temperature -55 Case Temperature Humidity Typical Maximum +100 Units °C +125 °C +105 °C 95 %RH Cooling Notes & Conditions Derate from 100% load at +55 °C to 50% at +80 °C or from 100% load at 60 °C to 50% at 85 °C with optional heatsink Non-condensing Natural convection www.xppower.com 2 JCM30 Series DC-DC Converter EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Class A See Application Note Radiated EN55032 Class A EMC: Immunity Phenomenon Standard Test Level Criteria ESD Immunity EN61000-4-2 ±6 kV/±8 kV A Notes & Conditions Contact/Air Discharge Radiated Immunity EN61000-4-3 20 Vrms A EFT/Burst EN61000-4-4 2 kV A External input filter required, see applications note Surge EN61000-4-5 2 kV A External input filter required, see applications note Conducted Immunity EN61000-4-6 10 V rms A Magnetic Fields EN61000-4-8 100 A/m A Mechanical Details 0.4 (10.16) 0.1 (2.54) Top View 4 6 5 2 1 1.0 (25.4) 1 0.1 (2.54) 0.2 (5.08) 0.5 (0.02) 0.41 (10.4) 2 0.04 (1.0) 1.0 (25.4) DIA 0.04 (1.0) 0.1 (2.54) 0.24 (6.0) Notes 1. All dimensions are in inches (mm) 2. Weight: 0.042 lbs (19 g) approx. 3. Pin diameter: 0.04±0.002 (1.0 ±0.05) 3 Pin 1 2 3 4 5 6 3 0.3 (7.62) Pin Connections 0.66 (16.8) 1.0 (25.4) Print Face 0.6 (15.24) 0.8 (20.32) 3 0.1 (2.54) 6 5 4 1.0 (25.4) 0.4 (10.16) 4. Pin pitch tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) www.xppower.com Single +Vin -Vin Dual +Vin -Vin Remote Remote On/Off On/Off +Vout Trim -Vout +Vout Common -Vout JCM30 Series DC-DC Converter Application Notes External Output Trimming 6 6 3 3 Ru Trim Up 5 JCM30 Bottom View 5 2 Trim Down JCM30 Bottom View 2 Rd 1 1 4 4 Trim Down Resistor Values (Rd) Models 1% 2% 3% 4% 5% 6% 7% 8% 9% 10% 3V3 817.5 k 362.2 k 215.4 k 143.0 k 99.7 k 71.1 k 50.6 k 35.3 k 23.4 k 14.0 k 5V 119.9 k 63.6 k 40.4 k 27.7 k 19.7 k 14.2 k 10.2 k 7.1 k 4.7 k 2.7 k 12V 345.0 k 164.8 k 98.9 k 64.6 k 43.7 k 29.6 k 19.4 k 11.7 k 5.7 k 0.87 k 15V 174.3 k 91.1 k 56.6 k 37.7 k 25.8 k 17.6 k 11.6 k 7.0 k 3.5 k 0.55 k 10% Trim Up Resistor Values (Ru) Models 1% 2% 3% 4% 5% 6% 7% 8% 9% 3V3 567.6 k 263.2 k 158.5 k 105.5 k 73.5 k 52.1 k 36.8 k 25.2 k 16.3 k 9.1 k 5V 618.0 k 223.4 k 133.3 k 93.4 k 70.9 k 56.4 k 46.4 k 38.9 k 33.2 k 28.7 k 12V 1015.7 k 448.9 k 280.6 k 199.8 k 152.4 k 121.2 k 99.1 k 82.6 k 69.9 k 59.7 k 15V 661.5 k 231.3 k 134.0 k 91.0 k 66.8 k 51.3 k 40.4 k 32.5 k 26.4 k 21.5 k EMT Filter (Only needed for 12 V input versions) EFT/Surge Filter L1 L C1 JCM30 Load C1 C2 C3 C4 D1 JCM30 Load L2 C1 = 1206, 335 k/50 V, X7R L = 0.82 µH C1 C2 L1 L2 C3 C4 D1 JCM3012 330 µF/100 V 470 µF/100 V 1 µH 1 µH 330 µF/100 470 µF/100 None JCM3024 330 µF/100 V None Short Short None None TVS, 58 V, 3 kW JCM3048 330 µF/100 V None Short Short None None TVS, 120 V, 3 kW www.xppower.com 19 July 16