Noise Suppression Products/EMI Suppression Filters > For Automotive > EMIFILr (Capacitor type) for Automotive Data Sheet 1 For Automotive EMIFILr (Capacitor type) for Automotive NFE61H Series (2706 Size) c Dimensions c Insertion Loss Characteristics (Main Items) (50Ω - 50Ω) 0 0.7±0.2 (2) (3) Insertion Loss (dB) 2.6±0.3 (1) 1.6±0.3 0.7±0.2 6.8+0.3 -0.5 NFE61HT330U2A9 NFE61HT680R2A9 10 1.6±0.3 NFE61HT101Z2A9 20 NFE61HT181C2A9 30 40 NFE61HT361C2A9 NFE61HT681D2A9 NFE61HT102F2A9 NFE61HT332Z2A9 50 60 0.1 1 10 100 1000 Frequency (MHz) (in mm) c Equivalent Circuit c Packaging Input (Output) (1) Code Packaging Minimum Quantity L 180mm Embossed Tape 2500 K 330mm Embossed Tape 8000 B Bulk(Bag) 500 Output (Input) (3) GND (2) No polarity. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFE61HT330U2A9p 33pF ±30% 2A 100Vdc 1000M ohm -55 to +125°C NFE61HT680R2A9p 68pF ±30% 2A 100Vdc 1000M ohm -55 to +125°C NFE61HT101Z2A9p 100pF ±30% 2A 100Vdc 1000M ohm -55 to +125°C NFE61HT181C2A9p 180pF ±30% 2A 100Vdc 1000M ohm -55 to +125°C NFE61HT361C2A9p 360pF ±20% 2A 100Vdc 1000M ohm -55 to +125°C NFE61HT681D2A9p 680pF ±30% 2A 100Vdc 1000M ohm -55 to +125°C NFE61HT102F2A9p 1000pF 80/-20% 2A 100Vdc 1000M ohm -55 to +125°C NFE61HT332Z2A9p 3300pF 80/-20% 2A 100Vdc 1000M ohm -55 to +125°C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for Automotive Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.11.8 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > For Automotive > EMIFILr (Capacitor type) for Automotive Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) 1. Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure our product. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for Automotive Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.11.8 http://www.murata.com/