ACT MO2700ABMGOAL-PF Crystal unit Datasheet

UM1 & UM5 Series
Crystal unit
RoHS & REACH compliant
Metal can Through hole type crystal unit : UM1: 8mm height, UM5 : 6mm height
wide frequency range
SMD gull wing type and 3 lead option available
Parameters
Specification
Remarks
3.5MHz ~ 100.0MHz (UM1)
F_nom
10.0MHz~100.0MHz (UM5)
Frequency Range
Table 1
Frequency Tolerance
F_tol ±5.0ppm ~ ±50.0ppm
±30.0ppm standard
Frequency stability over operating temperature range
F_stb ±5.0ppm ~ ±50.0ppm
Table 2
Operating Temperature Range
T_use ‐10°C ~ +60°C, ‐20°C ~ +70°C, ‐40°C ~ +85°C
Table 2
Storage temperature
T_stg ‐55°C ~ +125°C
Load capacitance
CL
5.0pF ~ 32.0pF, Series
Equivalent Series Resistance
ESR
Table 1
Shunt capacitance
C0
7.0pF max
DL
500μW max
Drive level
Frequency Aging
100μW typical
F_age ±3.0ppm/year at 25°C
Moisture sensitivity level
MSL
1 (unlimited)
Electrostatic discharge
ESD
Not applicable
Insulation resistance
IR
At 100V DC
500MΩ min
Table 1. Frequency vs ESR
Table 1. Frequency vs ESR
UM1 Series
UM5 Series
Table 2 Frequency Stability vs Temperature
Temp. (°C)
3.5Hz ~ 4.5MHz (Fund.)
200Ω
10.0MHz ~ 12.0MHz (Fund.)
120Ω
4.5MHz ~ 6.0MHzFund.)
150Ω
12.)MHz ~ 13.0MHz (Fund.)
80Ω
6.0MHz ~ 7.0MHzFund.)
120Ω
13.0MHz ~ 50.0MHz(Fund.)
40Ω
7.0MHz ~ 8.0MHzFund.)
100Ω
8.0MHz ~ 9.0MHzFund.)
60Ω
9.0MHz ~ 11.0MHzFund.)
40Ω
11.0MHz ~ 13.0MHzFund.)
35Ω
13.0MHz ~ 50.0MHzFund.)
30Ω
26.0MHz ~ 100.0MHz(3 OT)
45Ω
‐10°C ~ 60°C
Stability in ppm
±10
±15
±20
±30
±50
√
√
√
√
√
‐20°C ~ 70°C
√
√
√
√
√
‐40°C ~ 85°C
Enq.
Enq.
√
√
√
Dimensions (mm)
6.9±0.1
7.7±0.2
Package
H max
UM1
8.0mm
UM5
6.0mm
Side view
H
3.2±0.2
Top view
2.2±0.1
Front
view
13.0±0.5
Ø0.35±0.05
3.75±0.2
For Cropped lead crystal options and crystal with washer fitted are available ; Please check part numbering for ordering code.
ACT (A wholly owned Acal BFi Company)
+44 (0) 118 978 8878|[email protected]|www.act.co.uk
ISO9001 Registered
Specifications subject to change without notification
UM1 & UM5 Series
Crystal unit
Part number generation
MO
2700
G
K
L
GO
F
L
‐PF
ACT
Series
Code
Frequency
(MHz)
Frequency
Tolerance
(±ppm)
Frequency
stability over
temperature
range (±ppm)
Operating
Temperature
Range (°C)
Load
capacitance
(CL ‐pF)
Frequency
Mode
Packaging
(Tape &
Reel)
RoHS
UM1
8MHz = 0800
27MHz = 2700
±5 = A
±10 = E
±15 = F
±20 = G
±25 = H
±30 = I
±50 = L
±5 = B
±10 = F
±15 = G
±20 = I
±25 = J
±30 = K
±50 = O
‐10~+60 = E
‐20~+70 = G
‐30~+80 = K
‐40~+85 = M
8 = GO
9 = JO
10 = KO
11 = MO
12 = OO
13 = YO
14 = ZO
15 = PO
16 = RO
18 = TO
20 = VO
22 = WO
30 = DA
SR = SR
Loose = L
RoHS = ‐pF
UM1 Through hole = MO
Gull Wing (SMD) = XO
UM5
UM5 Through hole = NO
Gull Wing (SMD) = ZO
Note: Use the first 4
characters of the
frequency in Hz i.e.
27MHz =27000000Hz
If the frequency is
100MHz or higher then
the first 5 characters
are used
F’mental = F
3 OT = A
Note: It is important to suffix the above part number with full frequency required to give a completed part number as illustrated below.
Full Example Part Number : MO0800GKLGOFL‐PF [8.000MHz], MO2700GKLGOFL‐PF [27.000MHz] , MO2457GKLGOFL‐PF [24.576MHz]
Additional information
Please enquire for SMD gull wing type mechanical drawing
Please enquire for 3 lead option
Drawing control: (Internal use only)
Commodity code: 854160 00 00
Issue number: 1
Date: 1/2/2017
Internal reference: H3
ACT (A wholly owned Acal BFi Company)
+44 (0) 118 978 8878|[email protected]|www.act.co.uk
ISO9001 Registered
Specifications subject to change without notification
Similar pages