LITEON LTPL-P00DNS40 High power led Datasheet

Lite-On Technology Corporation
OFFICE : 90, Chien I Road, Chung Ho Taipei, Taiwan, R.O.C.
TEL : +886-2-2222-6181 ~ 8
FAX:+886-2-2221-0660,
+886-2-2221-2780,+886-2-2225-1518
FAX
HIGH POWER LED
LTPL-P00DNS40
DATA SHEET
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
1. Description
The LTPL (LiteOn Power LED) is a revolutionary, energy efficient and ultra compact new light source,
combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of
conventional lighting. It gives you total design freedom and unmatched brightness, creating a new
opportunities for solid state lighting to displace conventional lighting technologies.
Features
Applications
High power LED light source
Reading lights
Long life
Portable (flashlight, bicycle)
Instant light (less than 100 ns)
Downlighters/Orientation
Low voltage DC operated
Decorative/Entertainment
Low thermal resistance
Bollards/Security/Garden
RoHS Compliant
Cove/Undershelf/Task
Lead free reflow solder compatible
Traffic signaling/Beacons/ Rail crossing and Wayside
Indoor/Outdoor Commercial Residential Architectural
Edge_lit signs (Exit, point of sale)
2. Outline Dimensions
Notes
1. All dimensions are in millimeters.
2. Tolerance is ±0.2 mm (.008") unless otherwise noted.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
1
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
3. Rating and Characteristics
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Rating
Unit
Po
0.7
W
IF
80
mA
IFP
100
mA
Reverse Voltage *
VR
5
V
Junction Temperature
Tj
115
°C
Thermal Resistance, Junction-Case
Rth, J-C
20
°C/W
Thermal Resistance, Junction-Ambient
Rth, J-A
50
°C/W
Operating Temperature Range
Topr
-40 - 85
°C
Storage Temperature Range
Tstg
-40 - 100
°C
Power Dissipation
1
Forward Current *
1, *2
Forward Pulse Current *
1
Notes
1. The value are based on one die performance.
2. The pulse mode condition is 1/10 duty cycle with 100 msec pulse width.
3. Forbid to operating at reverse voltage condition for long.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
2
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electro-Optical Characteristics at Ta=25°C
Parameter
Symbol
1
Forward Voltage*
MIN.
TYP.
MAX.
Test Condition
2.7
3.0
3.6
IF= 40mA*
2.7
3.2
3.8
IF= 75mA*
11
17
IF = 40mA*
23.5
29
IF = 75mA*
70
IF = 40mA
60
IF = 75mA
1
VF
2
V
1
1
ΦV
Luminous Flux*
Unit
lm
1
*1
η
Efficiency
1
Reverse Current*
lm/W
IR
Color Rendering Index
2
View Angle*
*1
100
1
µA
VR = 5V*
*1
CRI
80
IF = 75mA
2θ1/2
120
IF = 75mA*
Cx
0.382
1
°
1
IF = 40mA*
2
Cy
0.377
Cx
0.385
Chromaticity Coordinates*
1
IF = 75mA*
Cy
0.380
Notes
1. For each die.
2. When all LED dies are operated simultaneously.
3. Luminous flux is the total luminous flux output as measured with an integrating sphere.
4. The chromaticity coordinates (x, y) is derived from the CIE 1931 chromaticity diagram.
5. IS CAS140B is for the luminous flux (lm) and the CIE1931 chromaticity coordinates (x, y) testing.
The chromaticity coordinates (x, y) guarantee should be added ± 0.005 tolerance.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
3
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Typical Electrical / Optical Characteristics Curves
1.0
0.9
0.8
Relative Intensity
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
450
500
550
600
650
700
750
Wavelength (nm)
Fig 1. Relative Spectrum of Emission
0°
100%
90%
30°
Relative Intensity (%)
80%
70%
60%
60°
50%
40%
30%
20%
10%
0%
90°
60
30°
0°
50
100
Fig 2. Radiation Characteristics
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
4
of
13
LITE-ON TECHNOLOGY CORPORATION
140
90
120
75
100
Forward Current (mA)
Forward Current (mA)
Property of Lite-On Only
80
60
40
60
Rth,J-A=60℃/W
Rth,J-A=50℃/W
45
Rth,J-A=40℃/W
30
Rth,J-A=30℃/W
15
20
0
0
2.0
2.5
3.0
60
3.5
80
120
Ambient Temperature (Degree)
Forward Voltage (V)
Fig 4. Forward Current Derating Curve
Fig 3. Forward Current
160%
0.405
Chromaticity Coordinates x,y
Relative Luminous Flux
100
120%
80%
40%
0.400
x
0.395
0.390
0.385
y
0.380
0.375
0.370
0.365
0%
0
40
80
Forward Current (mA)
Fig 5. Relative Luminous Flux
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
120
0
40
80
120
Forward Current (mA)
Fig 6. Chromaticity Coordinate Shift
Page:
5
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
4. Category Code Table
P0
S1
Chromaticity Coordinate Categories
Code
x
y
Q1
0.4130
0.3944
(3500)
0.4198
0.4115
0.4299
Code
x
y
Code
x
y
Q2
0.4061
0.3773
Q3
0.4036 0.3898
(3500)
0.4130
0.3944
(3500)
0.4097 0.4065
0.4165
0.4223
0.3990
0.4198 0.4115
0.4223
0.3990
0.4147
0.3814
0.4130 0.3944
Q4
0.3975
0.3731
Q5
0.3943
0.3853
Q6
0.3889 0.3690
(3500)
0.4036
0.3898
(3500)
0.3996
0.4015
(3500)
0.3943 0.3853
0.4130
0.3944
0.4097
0.4065
0.4036 0.3898
0.4061
0.3773
0.4036
0.3898
0.3975 0.3731
S1
0.3869
0.3829
S2
0.3822
0.3670
S3
0.3786 0.3777
(4000)
0.3916
0.3987
(4000)
0.3869
0.3829
(4000)
0.3826 0.3931
0.4006
0.4044
0.3952
0.3880
0.3916 0.3987
0.3952
0.3880
0.3898
0.3716
0.3869 0.3829
S4
0.3746
0.3624
S5
0.3703
0.3726
S6
0.3670 0.3578
(4000)
0.3786
0.3777
(4000)
0.3736
0.3874
(4000)
0.3703 0.3726
0.3869
0.3829
0.3826
0.3931
0.3786 0.3777
0.3822
0.3670
0.3786
0.3777
0.3746 0.3624
Luminous Flux Categories
CCT Bin Grade Spec
Code
Min
Max
Q:
3200-3750 K
P0
23.5
30.6
S:
3750-4250 K
Q0
30.6
39.8
R0
39.8
51.7
Notes
1. The value is all dies operated performance with forward current 75mA per die.
2. Luminous flux measurement allowance is ± 7%.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
6
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
0.43
3200K
3200K
0.42
0.41
3750K
Q1
Q1
0.40
Q3
Q3
4250K
0.39
Q5
Q5
S1
CY
S3
Q2
Q2
Q4
Q4
S5
0.38
S2
Q6
Q6
S4
0.37
S6
0.36
0.35
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
CX
Notes
1. The value is all dies operated performance.
2. The chromaticity coordinates (x, y) is derived from the CIE 1931 chromaticity diagram.
3. IS CAS140B is for the luminous flux (lm) and the CIE1931 chromaticity coordinates (x, y) testing.
The chromaticity coordinates (x, y) guarantee should be added ± 0.005 tolerance.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
7
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
5. Reflow Soldering Characteristics
tP
TP
Temperature
Ramp-up
TL
tL
TSmax
TSmin
Preheat, tS
25°C to Peak, t
Ramp-dow n
Time
Profile Feature
Lead Free Assembly
Average Ramp-Up Rate (TSmax to TP)
3°C / second max
Preheat Temperature Min (TSmin)
150°C
Preheat Temperature Max (TSmax)
200°C
Preheat Time (tSmin to tSmax)
60 – 180 seconds
Time Maintained Above Temperature (TL)
217°C
Time Maintained Above Time (tL)
60 – 150 seconds
Peak / Classification Temperature (TP)
260°C
Time Within 5°C of Actual Peak Temperature (t P)
5 seconds
Ramp – Down Rate
6°C / second max
Time 25°C to Peak Temperature
8 minutes max
Notes:
1. The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended
hand soldering condition is 350°C max. and 2secs ma x. for one time only.
2. All temperatures refer to topside of the package, measured on the package body surface.
3. The soldering condition referring to J-STD-020B. If the LEDs were unpacked more than 72hrs,
we
recommend baking the LEDs at 60℃ at least 12 hours before soldering process.
4. The soldering profile could be further referred to different soldering grease material characteristic. The
grease vendor will provide this information.
5. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature.
6. Although the recommended reflow conditions are specified above, the reflow or hand soldering
condition at the lowest possible temperature is desirable for the LEDs.
7. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip
soldering method
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
8
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
6. Recommend Solder Pad
Solder Pad Design
Notes:
1. All dimensions are in millimeters
2. The circle metallization board and lead contact pad is electrically isolated.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
9
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
7. Package Dimensions of Tape and Reel
Notes:
1. Empty component pockets sealed with top cover tape.
2. 1000 pieces per 7 inch real. (Min. packing quantities are 500 pieces for remainders)
3. The maximum number of consecutive missing LED is two.
4. In accordance with EIA-481-1-L23 specifications.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
10
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
8. Cautions
Application
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance
for information on applications in which exceptional reliability is required, particularly when the failure
or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation,
traffic control equipment, medical and life support systems and safety devices).
Storage
This product is qualified as Moisture Sensitive Level 4 per JEDEC J-STD-020 Precaution when
handing this moisture sensitive product is important to ensure the reliability of the product.
The package is sealed:
o
The LEDs should be stored at 30 C or less and 90%RH or less. And the LEDs are limited to use
within one year, while the LEDs is packed in moisture-proof package with the desiccants inside.
The package is opened:
o
The LEDs should be stored at 30 C or less and 60%RH or less. Moreover, the LEDs are limited to
solder process within 72hrs. If the Humidity Indicator shows the pink color in 10% even higher or
exceed the storage limiting time since opened, that we recommended to be with workable
desiccants in original package.
Drive Method
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
LED
Circuit model A
LED
Circuit model B
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
of those LEDs.
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
11
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Reliability Test
Test Item
Test Condition
Test Point
Number of
Damaged
Resistance to Soldering
Heat
Tsld = 260 C, 10 sec
o
1 Time
0 / 22
Solderability
Tsld = 245±5 C, 3 sec
1 Time
0 / 22
Room Temperature
Operating Life
25 C, IF = 75mA/Die
1000 Hours
0 / 22
High Temperature and
High Humidity Life
85 C / 85%RH, IF = 30mA/Die
1000 Hours
0 / 22
Temperature Cycle
-40 C / 100 C, 15 min dwell, < 5 min transfer
200 Cycles
0 / 22
Thermal Shock
-30 C / 85 C, 30 min dwell, < 20 sec transfer
200 Cycles
0 / 22
High Temperature
Storage
Ta = 100 C
o
1000 Hours
0 / 22
Low Temperature
Storage
Ta = -40 C
o
1000 Hours
0 / 22
o
o
o
o
o
o
o
Criteria for Judging the Damage
Criteria for Judgment
Item
Symbol
Test Condition
Min.
Forward Voltage
Vf
IF = 75mA/Die
Luminous Intensity
Lm
IF = 75mA/Die
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Max.
U.S.L. x 1.1
L.S.L. x 0.7
Page:
12
of
13
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:
Use a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling.
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low
forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and VF
of the suspect LEDs at low currents. The VF of “good” LEDs should be >[email protected] for InGaN
product.
Suggested Checking List
Static-Safe Workstation & Work Areas
1.
Static-safe working stations or work-areas have ESD signs.
2.
All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V.
3.
All ionizer activated, positioned towards the units.
4.
Each work surface mats grounding is good.
Personnel Grounding
1.
Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel
strap or conductive shoes with conductive flooring.
2.
If conductive footwear used, conductive flooring also present.
3.
Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V.
4.
The wrist strap or heel strap/conductive shoes are checked daily and result recorded.
5.
All wrist strap or heel strap checkers calibration up to date.
Device Handling
1.
Each ESDS items identified by EIA-471 labels on item or packaging..
2.
No static charge generators (e.g. plastics) inside shielding containers with ESDS items.
3.
All flexible conductive and dissipative package materials are inspected before reuse or
recycles
Part No.: LTPL-P00DNS40
BNC-OD-C131/A4
Page:
13
of
13