MIL-DTL-83513 Micro-D 507-195 EMI/RFI Micro-D Split Backshell Assembly with Clamp and Gland Nut Style Strain-Relief F Cable Range Typ G Shell I.D. Typ .079 (2.0) .060 (1.5) .130 (3.3) See Note 3 .140/.130 (3.6/3.3) Style G Gland Nut D Ref .573 (14.6) 1.060 (26.9) Max Style E Strain Relief 1.320 (33.5) Max .187 (4.7) Extended Jackscrew See How to Order E Thread Typ (See Note 3) Connector Shown for Reference Only Female Jackpost - Symbol F See How to Order A Fixed Female Jackpost - Symbol FF See How to Order C B HOW TO ORDER Series/ Basic Number Finish Symbol (Table III) 507-195 Shell Size (Table I) Dash No. (Table II) Jackscrew Option* E – Extended Jackscrew 09 15 21 25 31 37 51 100 F – Female Jackpost FE – Extended Female Jackpost Gland Nut or Strain Relief G – Gland Nut E – Strain Relief FF – Fixed Female Jackpost Omit for Standard Sample Part Number: 507-195 M 21 02 E G * SEE PAGE C-4 FOR COMPLETE INFORMATION NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. Accommodates MS3109 through MS3117 and M85049/68 Lipped-Type Shrink Boots. 3. Jackscrew and Jackpost to float allowing Connector to engage prior to Jackscrew. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-44 MIL-DTL-83513 Micro-D 507-195 EMI-RFI Micro-D Split Backshell Assembly with Clamp and Gland Nut Style Strain-Relief TABLE I: SHELL SIZE, CABLE ENTRY, BACKSHELL & CONNECTOR INTERFACE DIMENSIONS Shell Size 09 15 21 25 31 37 51 100 A Max .915 (23.4) 1.065 (27.1) 1.215 (30.9) 1.315 (33.4) 1.465 (37.2) 1.615 (41.0) 1.565 (39.8) 2.305 (51.7) B +.005 (0.13) .565 (14.4) .715 (18.2) .865 (22.0) .965 (24.5) 1.115 (28.3) 1.265 (32.1) 1.215 (30.9) 1.800 (45.7) C Max .281 (7.1) .281 (7.1) .281 (7.1) .281 (7.1) .281 (7.1) .281 (7.1) .312 (7.9) .360 (9.1) D Dia .450 (11.4) .450 (11.4) .450 (11.4) .450 (11.4) 450 (11.4) .450 (11.4) .495 (12.6) .540 (13.7) E +.010 (0.25) .701 (17.8) .763 (19.4) .795 (20.4) .857 (21.8) .888 (22.6) .951 (24.2) 1.013 (25.7) 1.076 (27.3) Clamp Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) F Dia Max .968 (24.6) 1.046 (9.5) 1.156 (29.4) G Max .515 (13.1) .640 (16.3) .765 (19.4) Shell I.D. .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .360 (9.1) .400 (10.2) TABLE III: FINISH OPTIONS TABLE II: DASH NUMBER AND CABLE ENTRY Dash No. 02 03 04 E Thread 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 4-40 UNC-2A Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. Accommodates MS3109 through MS3117 and M85049/68 Lipped-Type Shrink Boots. 3. Jackscrew and Jackpost to float allowing Connector to engage prior to Jackscrew. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-45