Spec. No. : C305A3 Issued Date : 2007.10.16 Revised Date : 2012.04.12 Page No. : 1/6 CYStech Electronics Corp. General Purpose PNP Epitaxial Planar Transistor BTA4403A3 Description • The BTA4403A3 is designed for using in driver stage of AF amplifier and general purpose amplification. • Large IC , IC Max .= -0.6A • Low VCE(sat), typically -0.2V at IC/IB = -300mA / -30mA. Ideal for low-voltage operation • Complementary to BTC4401A3. Symbol Outline BTA4403A3 TO-92 B：Base C：Collector E：Emitter ECB Absolute Maximum Ratings (Ta=25°C) Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Power Dissipation Thermal Resistance, Junction to Ambient Junction Temperature Storage Temperature BTA4403A3 Symbol Limits Unit VCBO VCEO VEBO IC Pd RθJA Tj Tstg -40 -40 -5 -0.6 625 200 150 -55~+150 V V V A mW °C/W °C °C CYStek Product Specification CYStech Electronics Corp. Spec. No. : C305A3 Issued Date : 2007.10.16 Revised Date : 2012.04.12 Page No. : 2/6 Characteristics (Ta=25°C) Symbol BVCBO BVCEO BVEBO ICEX *VCE(sat) 1 *VCE(sat) 2 *VBE(sat) 1 *VBE(sat) 2 hFE 1 hFE 2 hFE 3 *hFE 4 fT Cob Min. -40 -40 -5 -0.75 110 120 120 20 200 - Typ. 4.5 Max. -0.1 -0.4 -0.75 -0.95 -1.3 240 240 8.5 Unit V V V μA V V V V MHz pF Test Conditions IC=-100μA IC=-1mA IE=-100μA VCE=-35V, VEB=-0.4V IC=-150mA, IB=-15mA IC=-500mA, IB=-50mA IC=-150mA, IB=-15mA IC=-500mA, IB=-50mA VCE=-2V, IC=-0.1mA VCE=-2V, IC=-1mA VCE=-2V, IC=-50mA VCE=-2V, IC=-500mA VCE=-10V, IC=-20mA, f=100MHz VCB=-10V, f=1MHz *Pulse Test: Pulse Width ≤380μs, Duty Cycle≤2% Classification Of hFE 2 Rank A B C Range 120~160 150~220 210~240 Ordering Information Device Package Shipping TO-92 BTA4403A3, T/B 2000 pcs / Tape & Box (Pb-free lead plating and halogen-free) TO-92 BTA4403A3, bulk 1000 pcs/ bag, 10 bags/box, 10boxes/carton (Pb-free lead plating and halogen-free) BTA4403A3 CYStek Product Specification Spec. No. : C305A3 Issued Date : 2007.10.16 Revised Date : 2012.04.12 Page No. : 3/6 CYStech Electronics Corp. Characteristic Curves Current Gain vs Collector Current Saturation Voltage vs Collector Current 1000 HFE@VCE=3V Saturation Voltage---(mV) Current Gain--- HFE 1000 100 VCE(SAT)@IC=10IB 100 10 10 0.1 1 10 100 1 1000 100 1000 Collector Current---IC(mA) Collector Current---IC(mA) Saturation Voltage vs Collector Current Cutoff Frequency vs Collector Current 1000 Cutoff Frequency-FT(MHZ) Saturation Voltage---(mV) 1000 VBE(SAT)@IC=10IB FT@VCE=20V 100 10 100 0.1 1 10 100 Collector Current---IC(mA) 1 1000 10 100 Collector Current---IC(mA) Power Derating Curve Capacitances vs Reverse-biased Voltage 100 700 Power Dissipation---PD(mW) Capacitance---(pF) 10 Cib 10 Cob f=1MHz 600 500 400 300 200 100 0 1 0.1 BTA4403A3 1 10 Reverse-biased Voltage--(V) 100 0 50 100 150 200 Ambient Temperature --- Ta(℃ ) CYStek Product Specification Spec. No. : C305A3 Issued Date : 2007.10.16 Revised Date : 2012.04.12 Page No. : 4/6 CYStech Electronics Corp. TO-92 Taping Outline H2 H2A H2A H2 D2 A L H3 H4 H L1 H1 D1 F1F2 T2 T T1 DIM A D D1 D2 F1,F2 F1,F2 H H1 H2 H2A H3 H4 L L1 P P1 P2 T T1 T2 W W1 - BTA4403A3 P1 P Item Component body height Tape Feed Diameter Lead Diameter Component Body Diameter Component Lead Pitch F1-F2 Height Of Seating Plane Feed Hole Location Front To Rear Deflection Deflection Left Or Right Component Height Feed Hole To Bottom Of Component Lead Length After Component Removal Lead Wire Enclosure Feed Hole Pitch Center Of Seating Plane Location 4 Feed Hole Pitch Over All Tape Thickness Total Taped Package Thickness Carrier Tape Thickness Tape Width Adhesive Tape Width 20 pcs Pitch W1 W D P2 Millimeters Min. 4.33 3.80 0.36 4.33 2.40 15.50 8.50 2.50 12.50 5.95 50.30 0.36 17.50 5.00 253 Max. 4.83 4.20 0.53 4.83 2.90 ±0.3 16.50 9.50 1 1 27 21 11 12.90 6.75 51.30 0.55 1.42 0.68 19.00 7.00 255 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C305A3 Issued Date : 2007.10.16 Revised Date : 2012.04.12 Page No. : 5/6 Recommended wave soldering condition Product Pb-free devices Peak Temperature 260 +0/-5 °C Soldering Time 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly Pb-free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 240 +0/-5 °C 217°C 60-150 seconds 260 +0/-5 °C 10-30 seconds 20-40 seconds 6°C/second max. 6 minutes max. 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. BTA4403A3 CYStek Product Specification Spec. No. : C305A3 Issued Date : 2007.10.16 Revised Date : 2012.04.12 Page No. : 6/6 CYStech Electronics Corp. TO-92 Dimension Marking: α2 A A4403 B 1 2 3 α3 C D H I G α1 Style: Pin 1.Emitter 2.Collector 3.Base E F 3-Lead TO-92 Plastic Package CYStek Package Code: A3 *: Typical Inches Min. Max. 0.1704 0.1902 0.1704 0.1902 0.5000 0.0142 0.0220 *0.0500 0.1323 0.1480 DIM A B C D E F Millimeters Min. Max. 4.33 4.83 4.33 4.83 12.70 0.36 0.56 *1.27 3.36 3.76 DIM G H I α1 α2 α3 Inches Min. Max. 0.0142 0.0220 *0.1000 *0.0500 *5° *2° *2° Millimeters Min. Max. 0.36 0.56 *2.54 *1.27 *5° *2° *2° Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: Pure tin plated. • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0. Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. BTA4403A3 CYStek Product Specification