Designed for Rugged Excellence IDS-342(+) Features Industrial 4 secure serial port to Ethernet device server with 4xRS-232/422/485 and 2x10/100Base-T(X) Operating Modes: Virtual Com, Serial Tunnel, TCP Server, Support 4xRS-232/422/485 in DB9 connector Redundant multiple host devices: TCP Client, UDP 5 host devices: Virtual COM, TCP Server, TCP Client mode; 4 IP ranges: UDP Security: SSL data encryption; secured management by HTTPS and SSH: IP Access: IP White List Event Warning by Syslog, Email and SNMP trap Configurable by Web-based and Windows utility (DS-Tool) Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit) Ethernet switch mode enable Daisy Chain 1KV isolation for PoE PD port (802.3af) Introduction IDS-342 is an innovative secure 4 port RS-232/422/485 to 2 ports LAN secure device server with standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. On the other hand, IDS-342 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-342 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. IDS-342 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. Further, IDS-342 features PoE PD (Power Device) function, compliant with IEEE802.3af standard, with 1kv isolation on the PoE port. With wide operating temperature, -40~70oC, and rugged IP-30 housing design, IDS-342 series could operate in the harsh industrial environment. Therefore, IDS-342 is the best solution to the high demand of secure serial to Ethernet critical data communication. * All specifications are subject to change without notice. Designed for Rugged Excellence Practical Operation In practical operation of serial device servers, Windows utility (DS-Tool) is supported. This utility is very helpful for you to manage and monitor all of industrial device servers on the industrial network. IDS-342+ RS-232/422/485 IDS-342+ RS-232/422/485 SSL Data Encryption Multiple Host PCs IDS-342+ RS-232/422/485 IDS-342+ RS-232/422/485 TCP Client/Server Modes DS-Tool (Windows Utility): Monitoring and Configuration interface * All specifications are subject to change without notice. Designed for Rugged Excellence Pin Definition Pin # DB9 connector RS-232 RS-422 RS-485 RS-485 ( 4 wire ) ( 2 wire ) 1 DCD TX- TX- DATA - 2 RXD TX+ TX+ DATA + 3 TXD RX+ RX+ 4 DTR RX- RX- 5 GND GND GND 6 DSR 7 RTS 8 CTS 9 RI Dimension * All specifications are subject to change without notice. Designed for Rugged Excellence Specifications ORing Device Server Model IDS-342 IDS-342+ Physical Ports 10/100 Base-T(X) Ports in RJ45 2 Auto MDI/MDIX P.O.E. P.O.E.Present at ETH1 Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min Serial Ports Connector DB9 x 4 Operation Mode RS-232/422/485 Serial Baud Rate 110 bps to 460.8 Kbps Data Bits 7, 8 Parity odd, even, none, mark, space Stop Bits 1, 1.5, 2 RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Flow Control XON/XOFF, RTS/CTS, DTR/DSR Network Protocol Protocol ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP LED indicators Power indicator 10/100TX RJ45 port indicator Serial TX / RX LEDs: 3 x LEDs, PWR 1(2)(PoE) / Ready: Green On: Power is on Green for port Link/Act at 100Mbps. Amber: Serial port is receiving data Green: Serial port is transmitting data Power Redundant Input power Dual DC inputs. 12-48VDC on 6-pin terminal block Power consumption (Typ.) 4.32W Overload current protection Present Reverse polarity protection Present on terminal block Dual DC inputs. 12-48VDC on 6-pin terminal block IEEE 802.3af PoE PD (Eth 1) Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 66 (W) x 81 (D) x 95 (H) mm Weight (g) 375g 384g Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -40 to 70oC (-40 to 158oF) Operating Humidity 5% to 95% Non-condensing Regulatory approvals EMI EMS FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years * All specifications are subject to change without notice. Designed for Rugged Excellence Ordering Information IDS-3 A B C Code Definition Serial Port Type Serial Port Number Ethernet port Number POE Identification - 4: 4 ports - 2: 2 ports -"+": P.O.E. PD present at ETH1 - 1: RS-232 Option - 2: RS-422/485 - 3: RS-232/422/485 Model Name Description Available Model IDS-342 IDS-342+ Industrial 4-port secure serial to Ethernet device server with 4xRS-232/422/485 and 2x10/100Base-T(X) Industrial 4-port secure serial to Ethernet device server with 4xRS-232/422/485 and 2x10/100Base-T(X), 1-port PoE P.D. Packing List O IDS-342(+) x 1 Din-Rail Kit x 1 CD x 1 Quick Installation Guide x 1 Optional Accessories O DR-45 series : 45 Watts power supply DR-120 series : 120 Watts power supply DR-75 series : 75 Watts power supply * All specifications are subject to change without notice.