Automotive Product Data Sheet LTPA-C3535AWP Preliminary Spec No.： Created Date: 2016/05/30 Revision: (PRELIMINARY)-1.0 BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Specific Lighting LTPA-C3535AWP(PRELIMINARY) Rev 1.0 Description New data sheet By Date Thomas 05/30/2016 Above data for PD and Customer tracking only Customer Name: Customer Signature: Print Name: LiteON Sales Signature: Print Name: 1/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 1. Description The LiteOn White LED is a revolutionary, energy efficient and ultra-compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies 1.1 Features 1.2 Applications Meet RoHS and HF Highest brightness SMD LED Package in 12mm tape on 10" diameter reels. I.C. compatible Compatible with automatic placement equipment Compatible with infrared reflow solder process Aftermarket: accessary applications. Part No. Lens Color Source Color LTPA-C3535AWP Yellow / White InGaN White Notes: 1. All dimensions are in millimeters and dimension tolerances are ±0.3mm 2. Dimensions without tolerances are for reference only. 2/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 2. Rating and Characteristics 2.1 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit Power Dissipation Po 2.4 W DC Forward Current IF 700 mA Peak Plus Current Ip 1,000 mA ESD Sensitivity(HBM) VHBM 8 kV Junction Temperature Tj 145 °C Rth, J-C 9.5 °C / W Operating Temperature Range Topr -40~+85 °C Storage Temperature Range Tstg -40~+100 °C Thermal Resistance, Junction-Case Notes : 1. 2. 3. 4. 5. 6. The pulse mode condition is 1 KHz with 0.1msec pulse width.. Forbid to operating at reverse voltage condition ESD spec is reference to AEC-Q101-001 HBM. The unit of Rth is °C/W electrical and driving current is 350mA. Thermal resistance measurement tolerance is ± 10%,and with 8x 6 cm heat sink. The package LEDs are not designed to be driven in reverse bias. 3/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 2.2 Electro-Optical Characteristics Typical Performance for white (Ta= 25°C) Parameter Test Values Symbol Unit Min Typ. Max Correlated Color Temperature CCT -- 6000 -- K Color Rendering Index CRI -- 70 -- - Viewing Angle 2θ1/2 -- 118 -- deg Forward Voltage VF 2.8 3.2 3.6 V Luminous Flux ΦV 105 170 lm Condition IF = 350mA Notes 1. 2. 3. 4. 5. All of the VF value are typical and the real bin range please refer ”VF Binning Parameter”. All of the Flux value are typical and the real Bin range please refer ”Flux Binning Parameter”. Tolerance of Flux is ±10%, Tolerance of VF is ±5%, tolerance of CCx/CCy is ±0.01, tolerance of CRI is ±3., tolerance of DWL(Dominate Wave Length) is ±3nm LEDs are lighted up and measured with externally parallel connecting leads of LED. Typical viewing angle is 118deg. 4/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 3. Typical Electrical/Optical Characteristics Curve Efficiency Comparison Table 3.1 Relative Flux vs. Current Fig 1. Typical relative luminous flux vs. forward current 3.2 Beam Pattern Fig 2. Emission angle 5/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 3.3 Forward Current vs. Forward Voltage at 25°C Fig 3. Forward Current vs. Forward Voltage 3.4 Relative CIE-x v.s. Forward Current at 25°C 6/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 3.5 Relative CIE-y v.s. Forward Current at 25°C 3.6 Maximum Forward Current vs. Ambient Temperature 7/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 4. VF Bin Definition 4.1 Forward Voltage Binning Parameter at Ta = 25°C Parameter Bin Symbol Min Max 2.8 3.0 3.0 3.2 E 3.2 3.4 F 3.4 3.6 C D Forward Voltage VF Unit Condition V IF = 350mA Unit condition lm IF = 350mA Tolerance on each Forward Voltage bin is ± 5% 5. Flux Bin Definition 5.1 Luminous Flux Binning Parameter at Ta = 25°C Parameter Bin Symbol Min Max 105 120 120 135 S3 135 150 S4 150 170 S1 S2 Luminous Flux ΦV Tolerance on each Luminous Flux bin is ±10% 8/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 6. Hue Bin Definition 6.1 Chromaticity Coordinate Groups at Ta=25°C 6.1.1 Cool White hue point (CW series) C3535 hue for cool white family Code CW1 CW5 CW9 CW13 CW17 CW21 CW25 CW29 CW33 CW37 - x y 1 0.2950 0.2970 2 0.2920 0.3060 3 0.2984 0.3133 4 0.3009 1 Code - x y 1 0.292 0.306 - x y 1 0.2984 0.3133 - x y 1 0.2984 0.3133 2 0.2895 0.3135 3 0.2962 0.322 2 0.2962 0.322 3 0.3028 0.3304 2 0.3048 0.3207 3 0.3068 0.3042 4 0.2984 0.3133 4 0.3048 0.3113 0.3207 4 0.3009 0.2980 0.2880 1 0.2895 0.3135 1 0.3042 0.2962 0.3220 1 0.3037 2 0.2950 0.2970 2 0.2870 0.3210 0.2937 2 0.2937 0.3312 2 0.3009 3 0.3009 0.3042 3 0.2937 0.3312 0.3042 3 0.3005 0.3415 3 0.3068 4 0.3037 0.2937 4 0.2962 0.3113 0.3220 4 0.3028 0.3304 4 0.3093 1 0.3048 0.3207 1 0.2993 0.3028 0.3304 1 0.3115 0.3391 1 0.3130 2 0.3130 0.3290 0.3290 2 0.3115 0.3391 2 0.3205 0.3481 2 0.3213 3 0.3144 0.3186 0.3373 3 0.3130 0.3290 3 0.3213 0.3373 3 0.3221 4 0.3068 0.3261 0.3113 4 0.3048 0.3207 4 0.3130 0.3290 4 0.3144 1 0.3186 0.3068 0.3113 1 0.3005 0.3415 1 0.3099 0.3509 1 0.3144 0.3186 2 0.3144 0.3186 2 0.3099 0.3509 2 0.3196 0.3602 2 0.3221 0.3261 3 0.3161 0.3059 3 0.3115 0.3391 3 0.3205 0.3481 3 0.3231 0.3120 4 0.3093 0.2993 4 0.3028 0.3304 4 0.3115 0.3391 4 0.3161 0.3059 1 0.3215 0.3350 1 0.3207 0.3462 1 0.3290 0.3538 1 0.3290 0.3417 2 0.3290 0.3417 2 0.3290 0.3538 2 0.3376 0.3616 2 0.3371 0.3490 3 0.3290 0.3300 3 0.3290 0.3417 3 0.3371 0.3490 3 0.3366 0.3369 4 0.3222 0.3243 4 0.3215 0.3350 4 0.3290 0.3417 4 0.3290 0.3300 1 0.3222 0.3243 1 0.3196 0.3602 1 0.3290 0.3690 1 0.3290 0.3300 2 0.3290 0.3300 2 0.3290 0.3690 2 0.3381 0.3762 2 0.3366 0.3369 3 0.3290 0.3180 3 0.3290 0.3538 3 0.3376 0.3616 3 0.3361 0.3245 4 0.3231 0.3120 4 0.3207 0.3462 4 0.3290 0.3538 4 0.3290 0.3180 1 0.3371 0.3490 1 0.3376 0.3616 1 0.3463 0.3687 1 0.3451 0.3554 2 0.3451 0.3554 2 0.3463 0.3687 2 0.3551 0.3760 2 0.3533 0.3620 3 0.3440 0.3427 3 0.3451 0.3554 3 0.3533 0.3620 3 0.3515 0.3487 4 0.3366 0.3369 4 0.3371 0.3490 4 0.3451 0.3554 4 0.3440 0.3427 1 0.3366 0.3369 1 0.3381 0.3762 1 0.3480 0.3840 1 0.3440 0.3428 2 0.3440 0.3428 2 0.3480 0.3840 2 0.3571 0.3907 2 0.3515 0.3487 3 0.3429 0.3307 3 0.3463 0.3687 3 0.3551 0.3760 3 0.3495 0.3339 4 0.3361 0.3245 4 0.3376 0.3616 4 0.3463 0.3687 4 0.3429 0.3307 1 0.3530 0.3597 1 0.3548 0.3736 1 0.3641 0.3804 1 0.3615 0.3659 2 0.3615 0.3659 2 0.3641 0.3804 2 0.3736 0.3874 2 0.3702 0.3722 3 0.3590 0.3521 3 0.3615 0.3659 3 0.3702 0.3722 3 0.3670 0.3578 4 0.3512 0.3465 4 0.3530 0.3597 4 0.3615 0.3659 4 0.3590 0.3521 1 0.3512 0.3465 1 0.3571 0.3907 1 0.3668 0.3957 1 0.3590 0.3521 2 0.3590 0.3521 2 0.3668 0.3957 2 0.3771 0.4034 2 0.3670 0.3578 3 0.3567 0.3389 3 0.3641 0.3804 3 0.3736 0.3874 3 0.3640 0.3440 4 0.3495 0.3339 4 0.3548 0.3736 4 0.3641 0.3804 4 0.3567 0.3389 CW2 CW6 CW10 CW14 CW18 CW22 CW26 CW30 CW34 CW38 Code CW3 CW7 CW11 CW15 CW19 CW23 CW27 CW31 CW35 CW39 Code CW4 CW8 CW12 CW16 CW20 CW24 CW28 CW32 CW36 CW40 Tolerance of each hue bin is ±0.01 9/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 6.1.2 Cool white hue range Notes 1. The (CIEx, CIEy) center follow ANSI Quadrangle 10/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 7. Recommend Soldering Pad Layout Notes: 1. Suggest stencil thickness is maximum 0.10mm 11/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 8. Reflow Soldering Characteristics Notes 1. All temperatures refer to topside of the package, measured on the package body surface. 2. The soldering profile could be further referred to different soldering grease material characteristic. The grease vendor will provide this information. 3. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature. 4. Although the recommended reflow conditions are specified above, the reflow condition at the lowest possible temperature is desirable for the LEDs. 5. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering Method 12/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 9. Reliability Test Number of No Test item Test Condition Duration Damaged 1 Pre-conditional MSL 3 125℃, 24hrs baking Moisture Soak 60℃/60% 52hrs Interval: 15mins~4hours to do IR-Reflow Qualification Before parts before and after Test # 2, 3, 4, 5, 6, 7 Operating Life Ta=25℃, IF=700mA 1000 hrs 0/30 3 High Temperature Storage Ta=100℃ 1000 hrs 0/30 4 Low Temperature Storage Ta=-55℃ 1000 hrs 0/30 Ta=60℃, Rh=90% 500 hrs 0/30 100 cycle 0/30 100 cycle 0/30 2 5 Temperature Humidity Storage 6 Thermal Shock (air to air) 7 Temperature Cycle 8 Resistance to Soldering Heat 9 Solderability -40℃ ± 5℃ ~ 85 ± 5℃ 30min 30min -55℃~ 25℃~ 100℃~ 25℃ 30min 5min 30min 5min (1) Bake 125℃ / 24 hours (2) Acceleration moisture soak condition (if urgent): 60°C / 60% / 52 hours (Interval: 15mins ~ 4 hours to do IR-Reflow) (3) IR Reflow 2 times (260℃: 10 secs, Interval: 5 mins ~ 60 mins for each reflow) Tsld=245± 5℃ Before 0/30 and after Before 0/11 and after 13/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 10. Package Dimensions of Tape and Reel Reel Packaging Note: 1. All dimensions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. Minimum package quality is 500 pieces for remainders. 4. 10 inch reel max 1k pieces. 5. The maximum number of consecutive missing is two. 6. In accordance with ANSI/EIA 481 specifications. 14/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) 11. Cautions 11.1 An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit below. LED Circuit model A LED Circuit model B (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 11.2 Do not put any pressure on the light emitting surface either by finger or any hand tool and do not stack the COB products. Stress or pressure may cause damage to the wires of the LED array. 11.3 This product is not designed for the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions ・Do not use sulfur-containing materials in commercial products including the materials such as seals and adhesives that may contain sulfur. ・Do not put this product in a place with a lot of moisture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (Cl, H2S, NH3, SO2, NOX, etc.), exposure to a corrosive environment may affect silver plating. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and VF of the suspect LEDs at low currents. 15/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4 Specific Lighting LTPA-C3535AWP(PRELIMINARY) Lens Handling Remark The LED should only be picked up by making contact with the sides of the LED body. It should not put any pressure on the lens either by finger or any hand tool. Do not puncture or push the lens. Below figure illustrate correct and incorrect handling. The scrape on lens is acceptable but no effect about the RA test result. Storage This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing this moisture sensitive product is important to ensure the reliability of the product. The package is sealed: The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within one year, while the LEDs is packed in moisture-proof package with the desiccants inside. The package is opened: The storage ambient for the LEDs should not exceed 30°C temperature or 60% relative humidity. It is recommended that LEDs out of their original packaging are IR-reflowed within one week. For extended storage out of their original packaging, it is recommended that the LEDs be stored in a sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient. LEDs stored out of their original packaging for more than one year should be baked at about 60 deg C for at least 20 hours before solder assembly. 16/16 Part No. : LTPA-C3535AWP BNS-OD-FC002/A4