Surface Mount Aluminum Electrolytic Capacitors FEATURES • • • • • SAC Alloy Compatible 235°C ~ 260°C CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING REDUCED CASE SIZE (SMALLER THEN NAZT) LOW ESR & HIGH RIPPLE CURRENT AT 100KHz LOAD LIFE (2,000 HOURS @ +105°C) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Miuntes @ 20°C Dissipation Factor Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @ 105°C 2,000 hours 6.3 ~ 50Vdc 10 ~ 1,800μF -55 ~ +105°C ±20% (M) 0.01CV or 3μA whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ @ 120Hz/20°C W.V. (Vdc) Z-25°C/Z+20°C Z-40°C/Z+20°C Z-55°C/Z+20°C Capacitance Change Tan δ Leakage Current STANDARD VALUES AND CASE SIZES (mm) Cap. Code (μF) 10 100 22 220 33 330 47 470 68 680 100 101 150 151 220 221 330 331 390 470 560 680 820 1000 1200 1500 1800 391 471 561 681 821 102 122 152 182 Working Voltage (Vdc) 16 25 35 50 4x6.1 4x6.1 4x6.1 4x6.1 4x6.1 4x6.1 5x6.1 5x6.1 5x6.1 4x6.1 5x6.1 6.3x6.1 5x6.1 6.3x6.1 4x6.1 5x6.1 6.3x6.1 6.3x6.1 5x6.1 6.3x6.1 6.3x6.1 6.3x6.1 6.3x8 5x6.1 6.3x6.1 6.3x8 6.3x8 8x10.5 6.3x6.1 6.3x8 8x6.5 8x10.5 6.3x6.1 6.3x8 8x10.5 8x10.5 6.3x8 6.3x8 6.3x6.1 8x10.5 8x10.5 10x10.5 8x6.5 8x6.5 6.3x8 8x10.5 8x10.5 8x10.5 10x10.5 8x6.5 10x10.5 8x10.5 8x10.5 8x10.5 10x10.5 10x10.5 8x10.5 10x10.5 10x10.5 8x10.5 10x10.5 10x10.5 10x10.5 10x10.5 6.3 - 10 - RoHS Compliant includes all homogeneous materials *See Part P Number N b System S for f Details D il LOW ESR COMPONENT LIQUID ELECTROLYTE For Performance Data see www.LowESR.com 6.3 8.0 0.26 6.3 2 3 4 10 16 25 35 50 13 20 32 44 63 0.19 0.16 0.14 0.12 0.10 10 16 25 35 50 2 2 2 2 2 3 3 3 3 3 4 4 3 3 3 Within ±30% of initial measured value Less than ±200% of the specified maximum value Less than the specified maximum value PART NUMBER SYSTEM NAZJ 101 M 16V 6.3x6.1 N B W F Series RoHS Compliant Optional Wide Terminations* Termination/Packaging Code Reflow Temperature Code Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF *See page 6 for details regarding availability PEAK REFLOW TERMINATION FINISH & TEMPERATURE CODES PACKAGING OPTIONS CODES Code H J N Peak Reflow Temperature 235°C 240°C 260°C* Code B Finish & Reel Size Sn-Bi Finish & 13" Reel *Special conditions apply for 8mm and 10mm diameter parts. See the 3rd page of this datasheet for details. + Dφ DIMENSIONS (mm) AND REEL QUANTITIES Case Size φD±0.5 L max. A±0.2 B±0.2 I±0.3 W P±0.3 Qty/Reel 4x6.1 4.0 6.1 4.3 4.3 1.8 0.55~0.75 1.0 1,200 5x6.1 5.0 6.1 5.3 5.3 2.2 0.55~0.75 1.5 800 6.3x6.1 6.3 6.1 6.6 6.6 2.6 0.55~0.75 1.8 800 6.3X8 6.3 8.0 6.6 6.6 2.6 0.55~0.75 1.8 500 8x6.5 8.0 6.5 8.3 8.3 3.4 0.55~0.75 2.2 800 8x10.5 8.0 10.5 8.3 8.3 2.9 0.8~1.1 3.1 300 8x10.5 8.0 10.5 8.3 8.3 3.4 0.7~1.1 3.1 300 10x10.5 10.0 10.5 10.3 10.3 3.2 0.8~1.1 4.6 300 10x10.5 10.0 10.5 10.3 10.3 3.5 0.7~1.1 4.6 300 NIC COMPONENTS CORP. www.niccomp.com NAZJ Series www.lowESR.com I I - W 0.3mm max. A L P B www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Aluminum Electrolytic Capacitors NAZJ Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS Cap. W.V. Dissipaton Factor (μF) (Vdc) (Tan δ) NAZJ220M6.3V4X6.1NBF 22 0.26 NAZJ470M6.3V4X6.1NBF 47 0.26 NAZJ470M6.3V5X6.1NBF 47 0.26 NAZJ101M6.3V5X6.1NBF 100 0.26 NAZJ101M6.3V6.3X6.1NBF 100 0.26 NAZJ221M6.3V6.3X6.1NBF 220 0.26 NAZJ331M6.3V6.3X8NBF 330 0.26 NAZJ331M6.3V8X6.5NBF 330 0.26 6.3 NAZJ471M6.3V8X10.5JBF 470 0.26 NAZJ471M6.3V8X10.5NBF 470 0.26 NAZJ102M6.3V8X10.5JBF 1000 0.26 NAZJ102M6.3V8X10.5NBF 1000 0.26 NAZJ152M6.3V10X10.5HBF 1500 0.26 NAZJ152M6.3V10X10.5NBF 1500 0.26 NAZJ182M6.3V10X10.5HBF 1800 0.26 NAZJ182M6.3V10X10.5NBF 1800 0.26 22 0.19 NAZJ220M10V4X6.1NBF NAZJ330M10V4X6.1NBF 33 0.19 NAZJ330M10V5X6.1NBF 33 0.19 NAZJ151M10V6.3X6.1NBF 150 0.19 NAZJ221M10V6.3X8NBF 220 0.19 NAZJ221M10V8X6.5NBF 220 0.19 NAZJ331M10V8X10.5JBF 330 0.19 NAZJ331M10V8X10.5NBF 330 0.19 10 NAZJ471M10V8X10.5JBF 470 0.19 NAZJ471M10V8X10.5NBF 470 0.19 NAZJ681M10V8X10.5JBF 680 0.19 NAZJ681M10V8X10.5NBF 680 0.19 NAZJ102M10V10X10.5HBF 1000 0.19 NAZJ102M10V10X10.5NBF 1000 0.19 NAZJ122M10V10X10.5HBF 1200 0.19 NAZJ122M10V10X10.5NBF 1200 0.19 NAZJ100M16V4X6.1NBF 10 0.16 NAZJ220M16V4X6.1NBF 22 0.16 NAZJ220M16V5X6.1NBF 22 0.16 NAZJ470M16V5X6.1NBF 47 0.16 NAZJ470M16V6.3X6.1NBF 47 0.16 NAZJ680M16V6.3X6.1NBF 68 0.16 NAZJ101M16V6.3X6.1NBF 100 0.16 NAZJ101M16V6.3X8NBF 100 0.16 NAZJ151M16V6.3X8NBF 150 0.16 NAZJ221M16V6.3X8NBF 220 16 0.16 NAZJ221M16V8X6.5NBF 220 0.16 NAZJ331M16V8X10.5JBF 330 0.16 NAZJ331M16V8X10.5NBF 330 0.16 NAZJ471M16V8X10.5JBF 470 0.16 NAZJ471M16V8X10.5NBF 470 0.16 NAZJ681M16V10X10.5HBF 680 0.16 NAZJ681M16V10X10.5NBF 680 0.16 NAZJ821M16V10X10.5HBF 820 0.16 NAZJ821M16V10X10.5NBF 820 0.16 NAZJ100M25V4X6.1NBF 10 0.14 NAZJ220M25V5X6.1NBF 22 0.14 NAZJ330M25V5X6.1NBF 33 0.14 25 NAZJ330M25V6.3X6.1NBF 33 0.14 NAZJ470M25V6.3X6.1NBF 47 0.14 NAZJ680M25V6.3X6.1NBF 68 0.14 Denotes Lower Reflow Temperature Rated, Lower Cost Alternative NIC Part Number Max. ESR (Ω) 100KHz, +20°C 0.85 0.85 0.36 0.36 0.26 0.26 0.16 0.18 0.08 0.08 0.08 0.08 0.06 0.06 0.08 0.08 0.85 0.85 0.36 0.26 0.16 0.18 0.08 0.08 0.08 0.08 0.08 0.08 0.06 0.06 0.08 0.08 0.85 0.85 0.36 0.36 0.26 0.26 0.26 0.16 0.16 0.16 0.18 0.08 0.08 0.08 0.08 0.06 0.06 0.08 0.08 0.85 0.36 0.36 0.26 0.26 0.26 Max. Ripple Current (mA) +105°C, 100KHz 160 160 240 240 300 300 600 500 850 850 850 850 1190 1190 850 850 160 160 240 300 600 500 850 850 850 850 850 850 1190 1190 850 850 160 160 240 240 300 300 300 600 600 600 500 850 850 850 850 1190 1190 850 850 160 240 240 300 300 300 Load Life Hours @ +105°C 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NAZJ Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS Cap. W.V. Dissipaton Factor (μF) (Vdc) (Tan δ) NAZJ101M25V6.3X8NBF 100 0.14 NAZJ101M25V8X6.5NBF 100 0.14 NAZJ151M25V8X10.5JBF 150 0.14 NAZJ151M25V8X10.5NBF 150 0.14 NAZJ221M25V8X10.5JBF 220 0.14 NAZJ221M25V8X10.5NBF 220 0.14 25 NAZJ331M25V8X10.5JBF 330 0.14 NAZJ331M25V8X10.5NBF 330 0.14 NAZJ471M25V10X10.5HBF 470 0.14 NAZJ471M25V10X10.5NBF 470 0.14 NAZJ561M25V10X10.5HBF 560 0.14 NAZJ561M25V10X10.5NBF 560 0.14 10 0.12 NAZJ100M35V4X6.1NBF NAZJ220M35V5X6.1NBF 22 0.12 NAZJ330M35V6.3X6.1NBF 33 0.12 NAZJ470M35V6.3X6.1NBF 47 0.12 NAZJ680M35V6.3X8NBF 68 0.12 NAZJ101M35V6.3X8NBF 100 0.12 NAZJ101M35V8X10.5JBF 100 0.12 NAZJ101M35V8X10.5NBF 100 0.12 35 NAZJ151M35V8X10.5JBF 150 0.12 NAZJ151M35V8X10.5NBF 150 0.12 NAZJ221M35V8X10.5JBF 220 0.12 NAZJ221M35V8X10.5NBF 220 0.12 NAZJ331M35V10X10.5HBF 330 0.12 NAZJ331M35V10X10.5NBF 330 0.12 NAZJ391M35V10X10.5HBF 390 0.12 NAZJ391M35V10X10.5NBF 390 0.12 NAZJ101M50V8X10.5NBF 100 0.10 50 NAZJ221M50V10X10.5NBF 220 0.10 Denotes Lower Reflow Temperature Rated, Lower Cost Alternative NIC Part Number RIPPLE CURRENT FREQUENCY CORRECTION FACTOR (STANDARD) Frequency 10 ~ 470μF 560 ~ 1800μF 120Hz 0.65 0.75 1KHz 0.85 0.90 10KHz 0.95 0.95 100KHz ~ 1.00 1.00 Max. ESR (Ω) 100KHz, +20°C 0.16 0.18 0.08 0.08 0.08 0.08 0.08 0.08 0.06 0.06 0.08 0.08 0.85 0.36 0.26 0.26 0.16 0.16 0.08 0.08 0.08 0.08 0.08 0.08 0.06 0.06 0.08 0.08 0.18 0.12 Max. Ripple Current (mA) +105°C, 100KHz 600 500 850 850 850 850 850 850 1190 1190 850 850 160 240 300 300 600 600 850 850 850 850 850 850 1190 1190 850 850 670 900 Load Life Hours @ +105°C 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR (ALTERNATIVE PART) Frequency 100 ~ 150μF 220 ~ 1800μF 120Hz 0.50 0.60 1KHz 0.80 0.85 10KHz 0.95 0.95 100KHz ~ 1.00 1.00 Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Surface Mount Aluminum Electrolytic Capacitors NAZJ Series PEAK REFLOW TEMPERATURE, DURATION AND NUMBER OF REFLOW PASSES ALLOWED Diameter 4 ~ 6.3mm φ 8mm φ 10mm φ 8 ~ 10mm φ (see note 1) Reflow Code N N J H N N Peak Temperature +260°C +255°C +240°C °235°C +260°C +245°C Duration Time > 250°C 5 sec. Time > 250°C 10 sec. Time > 240°C 5 sec. Time > 235°C 5 sec. Time > 250°C 5 sec. Time > 240°C 10 sec. Time above 200°C 70 sec. 70 sec. 90 sec. 60 sec. 70 sec. 70 sec. Time above 217°C 40 sec. 40 sec. n/a n/a 40 sec. 40 sec. Time above 230°C 30 sec. 30 sec. 30 sec. 30 sec. 30 sec. 30 sec. Number of Reflow Passes 2 2 2 2 1 only 2 RECOMMENDED LAND PATTERN DIMENSIONS (mm) Case Size 4x6.1 5x6.1 6x3x6.1 6.3x8 8x6.5 8x10.5 8x10.5 10x10.5 10x10.5 a 1.0 1.5 b 2.5 2.8 c 1.6 1.6 1.8 3.2 1.6 2.2 3.0 3.1 4.5 4.6 4.0 4.1 4.0 4.3 4.1 1.6 2.2 2.0 2.2 2.0 a c b Temperature - Deg. C 1. Only one (1) reflow pass is allowed for 8mm and 10mm diameter parts (N reflow code) if the peak reflow temperature is +260°C. 2. In situations where two reflow passes is allowed the second reflow shall be at least one hour after natural cool to room temperature has occurred. Peak Temperature (see table) 230 Time Above 230°C (see table) 200 Time Above 217°C (see table) 150 100 Preheat - 120 seconds max. (150°C ~ 180°C) 50 Time (Seconds) WIDE TERMINATION (WT) DIM. (mm) Case Size 8x6.5 8x10.5 10x10.5 Dφ ± 0.5 8.0 8.0 10.0 L ± 0.3 6.5 10.5 10.5 A, B ± 0.2 C max. 8.3 9.5 8.3 10.0 10.3 12.0 P ref. I ref. W R ± 0.2 (2.2) 3.4 0.7 ± 0.1 0.7 (3.1) 3.4 1.2 ± 0.2 0.7 (4.6) 3.4 1.2 ± 0.2 0.7 R ± 0.2 5.3 5.3 6.9 C W Time Above 200°C (see table) T ± 0.2 1.7 1.3 1.3 Dφ S A WT Anti-Vibration Skirt L T R R I P I B WT LAND PATTERN DIM. (mm) Case Size 8x6.5 8x10.5 10x10.5 a 1.8 2.7 3.9 b 4.1 4.0 4.4 c 5.0 4.7 4.7 Termination deflection: WT = 0.15mm max. from bottom of support terminals WT LAND PATTERN DIM. (mm) Case Size 8x6.5 8x10.5 10x10.5 a 1.8 2.7 3.9 b 4.1 4.0 4.4 c 5.0 4.7 4.7 d 1.3 1.3 1.3 e 1.5 1.0 1.2 f 1.4 1.7 1.9 g 1.5 1.1 1.1 h 2.0 2.5 2.5 h g f b d e a a b b c c 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors TR13 330mm (13") REEL TR15 380mm (15") REEL CARRIER TAPE Case Size 4 x 6.1 5 x 6.1 6.3 x 6.1 6.3 x 8 8 x 6.5 8 X 10.5 10 x 10.5 NAZJ Series A ±0.5 B ±0.2 C ±0.3 D ±0.1 P ±0.1 T ±0.2 4.7 4.7 12.0 5.5 8.0 6.2 5.7 5.7 12.0 5.5 12.0 6.4 7.0 7.0 16.0 7.5 12.0 6.4 7.0 7.0 16.0 7.5 12.0 8.4 8.7 8.7 16.0 7.5 12.0 6.8 8.7 8.7 24.0 11.5 16.0 11.0 10.7 10.7 24.0 11.5 16.0 11.0 Case Size W ±1.0 4 x 6.1 5 x 6.1 6.3 x 6.1 6.3 x 8 8 x 6.5 8 X 10.5 10 x 10.5 14.0 14.0 18.0 18.0 18.0 26.0 26.0 Quantity Per Reel 13" Reel 1,200 pcs 800 pcs 800 pcs 500 pcs 800 pcs 300 pcs 300 pcs TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. CARRIER 4 + 0.1 1.5∅ +0.1/1.5φ+0.1/-0 1.75 + 0.15 1.75 ± C B D - 0.4 + 0.2 + A P Feeding T REEL 2. 0± 50∅ Min. 2 ±0 1 .8 0. 330 or 380mm 13∅ ±0.5 3.0 ± 0.5 5 W NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 5